Hardware
Hardware: components, molecules, projects, and equipment with symbols, footprints, and 3D models.
62 hardware pages matching · page 1 of 2
coax-antennuator-molecule-32x32
Inline Mini-Circuits YAT attenuator between two SMP jacks
adom-wiki pkg install adom/coax-antennuator-molecule-32x32coax-molecule-2ch-64x64
Four Amphenol SMP jacks — two coax channels — 64 x 64 mm
adom-wiki pkg install adom/coax-molecule-2ch-64x64rf-mech-molecule-64x64
Mechanical datum — machine pins + mounting holes — 64 x 64 mm
adom-wiki pkg install adom/rf-mech-molecule-64x64rf-mech-molecule-32x64
Mechanical datum — machine pins + mounting holes — 32 x 64 mm
adom-wiki pkg install adom/rf-mech-molecule-32x64rf-mech-molecule-32x32
Mechanical datum — machine pins + mounting holes — 32 x 32 mm
adom-wiki pkg install adom/rf-mech-molecule-32x32tmf8829-adapter-molecule
TMF8829 breakout onto a 32 x 32 mm machine-pin datum
adom-wiki pkg install adom/tmf8829-adapter-moleculeESC G431
Single-motor ESC for the drone test cell: STM32G431 + DRV8300 driving a 3-phase bridge of six BSC016N06NS MOSFETs, TPSM365 buck to 12 V, INA181 low-side current sense (25 mV/A, 131 A full-scale). Runs AM32. 64 x 74 mm, 4-layer.
adom-wiki pkg install adom/esc-g431FC Carrier (RP2350A-Mini)
Flight-controller carrier for the single-motor drone cell: hosts the RP2350A-Mini, bridges 5 V to two loads, monitors the 5 V rail into the mini's ADC, and carries a hardware E-stop that drives the ESC brake. 38.8 x 70.8 mm, 4-layer, 32 x 64 mm datum.
adom-wiki pkg install adom/carrier-fc-rp2350a-miniDrone Motor Carrier
Passive baseplate for the single-motor drone test cell: mounts the BLDC motor, passes its three phases through, routes two load-cell channels, and nests the RP2350A/ADS1220 acquisition molecule and a PiProbe over a 96 x 96 mm machine-pin datum. 104 x 104 mm, 4-layer.
adom-wiki pkg install adom/drone-motor-carrierRP2350A + ADS1220 Molecule
24-bit thrust-acquisition molecule for the drone motor carrier: an RP2350A paired with a TI ADS1220 24-bit ADC, W25Q16JV flash and AP2112K-3.3 LDO, with a ratiometric load-cell front-end. Nests on the motor carrier over machine pins.
adom-wiki pkg install adom/rp2350a-ads1220bmi270-molecule
Bosch BMI270 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) packaged as an Adom molecule — anchored GLB, machine-pin wings, KiCad source.
adom-wiki pkg install adom/bmi270-moleculebme690-molecule
Bosch BME690 4-in-1 environmental sensor (gas, pressure, humidity, temperature) packaged as an Adom molecule — anchored GLB, machine-pin wings, KiCad source.
adom-wiki pkg install adom/bme690-moleculeusb2532-hub-c-wiretest
USB2532 HUB molecule (KiCad) wiring-pipeline test: anchored GLB + .kicad_pcb. Validates KiCad publish->import->footprint->wiring end to end.
adom-wiki pkg install drew2/usb2532-hub-c-wiretestwireless-link
Molecule exported from Fusion 360: wireless-link
adom-wiki pkg install cosmiic/wireless-linkpiprobe-v1-3
PiProbe_v1.3: RP2040-based SWD debug probe molecule — 28×20 mm, CMSIS-DAP with SWD debug + UART passthrough, 9 machine contacts + 4 machine pins. Runs Raspberry Pi Debugprobe firmware. Flash and debug RP2040/RP2350 and other Arm targets in the Adom workcell.
adom-wiki pkg install adom/piprobe-v1-3rp2350a-mini
General-purpose RP2350A castellated module — 20×36 mm, dual-core Arm Cortex-M33 / Hazard3 RISC-V MCU with 16 Mbit QSPI flash, USB, UART, SWD debug, and 4 ADC channels. 26 user-programmable GPIO/ADC pins on castellated machine contacts (44 contacts + 4 corner machine pins). Drop-in MCU module for Adom workcell designs.
adom-wiki pkg install adom/rp2350a-miniNametag Blank Large LED
USB-C powered 160 x 48 mm LED nametag blank: six side-firing OSRAM LW A6SG white LEDs on a 2-layer 1.6 mm FR4 carrier, with four large and two medium Adom machine pins for workcell mounting.
adom-wiki pkg install adonis/nametag-blank-large-ledbmv080-molecule
Bosch BMV080 ultra-compact PM2.5 particulate-matter sensor packaged as an Adom molecule — anchored GLB, machine-pin wings, FPC connector, KiCad source.
adom-wiki pkg install adom/bmv080-moleculeI2S: Carrier
I2S_Carrier_v1.0: Carrier for I2S MEMs Microphones, standardized to fit all MEMs varients. Jumper selects Left or Right.
adom-wiki pkg install caleb/i2s-carrierAMS1117-3.3 Molecule
AMS1117-3.3 3.3V LDO regulator molecule — SOT-223 regulator + 10uF/22uF decoupling caps on a machine-pin carrier (medium-short pins). 5V->3.3V rail brick.
adom-wiki pkg install adom/ams1117-3v3-moleculelrg-lrg-6x6-p16
COSMIIC 16-pitch base scaffold, 6x6 EVEN large-pin grid — 4 machine pins + 144 large contacts for modular implant assembly
adom-wiki pkg install cosmiic/lrg-lrg-6x6-p16lrg-lrg-5x10-p16
COSMIIC 16-pitch base scaffold, 5x10 large-pin grid — 4 machine pins + 167 large contacts for modular implant assembly
adom-wiki pkg install cosmiic/lrg-lrg-5x10-p16pm1-frame-mol-refined
COSMIIC PM1 refined frame molecule for power management packaging
adom-wiki pkg install cosmiic/pm1-frame-mol-refinedpm-coil-molecule
COSMIIC PM power management coil molecule for wireless charging
adom-wiki pkg install cosmiic/pm-coil-moleculecosmocoil-mol
COSMIIC COSMOCOIL wireless power transfer coil molecule
adom-wiki pkg install cosmiic/cosmocoil-molCOSMIIC Biopotential Amplifier Eval Board
COSMIIC BP2 Biopotential Amplifier — AT90CAN128 AVR, 2-channel differential EMG/MES recording, on-board feature extraction, 4-layer micro-via PCB. Altium project, Gerbers, STEP, BOM.
adom-wiki pkg install cosmiic/cosmiic-biopotential-amplifier-eval-board-465000COSMIIC Pulse Generator Eval Board
COSMIIC PG4 Pulse Generator — AT90CAN128 AVR, 4-channel monopolar stimulation (0–20 mA, 1–255 μs), triple failsafe, CANopen networked. Altium project, Gerbers, STEP, BOM.
adom-wiki pkg install cosmiic/cosmiic-pulse-generator-eval-board-545000PG4 FRAME MOL
Molecule exported from Fusion 360: PG4 FRAME MOL
adom-wiki pkg install cosmiic/pg4-frame-molBP2 FRAME MOL
Molecule exported from Fusion 360: BP2 FRAME MOL
adom-wiki pkg install cosmiic/bp2-frame-molranger-micro-breakout-molecule-extended
U.FL + SMP + YAT attenuator breakout — 104 x 104 mm
adom-wiki pkg install adom/ranger-micro-breakout-molecule-extendedrp1-breakout-molecule-extended
U.FL + SMP + YAT attenuator on a machine-pin breakout — 104 x 104 mm
adom-wiki pkg install adom/rp1-breakout-molecule-extendedcombiner-molecule
Two Mini-Circuits EP2W+ combiners, four SMP jacks — 104 x 104 mm
adom-wiki pkg install adom/combiner-moleculecoax-molecule-32x32
Two Amphenol SMP jacks on a 32 x 32 mm datum
adom-wiki pkg install adom/coax-molecule-32x32Oliver's LED Nameplate
USB-C powered desk nameplate spelling OLIVER in 57 white 0603 LEDs. Plug in any phone charger and the name lights up.
adom-wiki pkg install olivercarson/oliver-led-nameplateMolecule_NTX15R
Molecule exported from Fusion 360: Molecule_NTX15R
adom-wiki pkg install adom/moleculentx15rAM/FM Receiver Molecule
USB-powered AM/FM receiver on an Adom Molecule: discrete BJT and op-amp superhet (10.7 MHz and 455 kHz IFs), STM32G0B1 tuning, self-calibration and USB audio over one USB-C cable. 96 x 96 mm pin grid, 4 layers, KiCad 10.
adom-wiki pkg install adom/amfm-receiver-molecule12 V to 5 V / 1 A Buck Molecule (TPS54202), built in Altium Designer
A 12 V to 5 V, 1 A TPS54202 buck molecule designed and built by AI in Altium Designer from one sentence, with the Altium project, Gerbers, BOM, simulation and current and heat analysis.
piprobe-wiretest
PiProbe molecule (KiCad-origin) wiring-pipeline test: KiCad GLB + .kicad_pcb. Validates the KiCad publish -> import -> footprint -> wiring path end to end.
adom-wiki pkg install drew2/piprobe-wiretestpiprobe-occt-molecule
PiProbe molecule — full OCCT molecule-mode output (auto-anchor FL->origin, gold PBR pins, join+Draco) from a KiCad-10 desktop STEP export. End-to-end pipeline validation artifact.
adom-wiki pkg install drew2/piprobe-occt-moleculemolecule-ap2114h-wiretest
AP2114H molecule (KiCad) wiring-pipeline test: anchored GLB + .kicad_pcb.
adom-wiki pkg install drew2/molecule-ap2114h-wiretestbhi385-wiretest
BHI385 wiring-pipeline test molecule (Fusion-origin): STEP + silkscreen + EAGLE .brd. Validates wiki publish (STEP->GLB+silk) and import-time footprint generation.
adom-wiki pkg install drew2/bhi385-wiretestadipose-molecule
COSMIIC ADIPOSE tissue interface molecule for bioelectronic implants
adom-wiki pkg install cosmiic/adipose-molecule502535-lipo-molecule
COSMIIC 502535 LIPO battery molecule for implantable neural interfaces
adom-wiki pkg install cosmiic/502535-lipo-moleculeUSB3.0 to Ethernet Molecule
USB-C to Gigabit Ethernet (data-only) adapter board on the Microchip LAN7800. Self-contained: bundles the complete KiCad library (29 symbols, 16 footprints, 15 3D models) AND links all 28 components as dependencies.
adom-wiki pkg install adom/usb3-to-ethernet-dataonly-moleculerf-scaffold-module
SMP to SMPM edge, on a machine-pin datum — 32 x 88 mm
adom-wiki pkg install adom/rf-scaffold-moduleEVE LF105 Prismatic Battery Molecule
Adom molecule carrier for the EVE LF105 prismatic LiFePO4 cell (105Ah). Part of the Modular BMS system.
adom-wiki pkg install adom/molecule-eve-lf105-prismaticBQ76952 BMS Molecule v2
Adom molecule for the TI BQ76952 battery management IC with charge/discharge FET control, cell balancing, and protection. The brain of the Modular BMS system.
adom-wiki pkg install adom/molecule-bq76952-v218650 Jumper Molecule
Adom molecule jumper/interconnect for series-connecting 18650 battery carrier molecules. Part of the Modular BMS system.
adom-wiki pkg install adom/molecule-18650-jumper