molecule

ESC G431

Public Made by Adom

by adom

Single-motor ESC for the drone test cell: STM32G431 + DRV8300 driving a 3-phase bridge of six BSC016N06NS MOSFETs, TPSM365 buck to 12 V, INA181 low-side current sense (25 mV/A, 131 A full-scale). Runs AM32. 64 x 74 mm, 4-layer.

moleculeboardkicadescstm32g431drv8300bldcam32adom-machine-pinsdrone
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
esc-g431 / docs / astra / project-cad / esc-copper-test-pads
Name Last commit message Last updated
esc-copper-test-pads.kicad_sym Keep Astra board-specific CAD definitions inside the ESC project · John Lauer 21d ago
provenance.json Keep Astra board-specific CAD definitions inside the ESC project · John Lauer 21d ago
README.md Keep Astra board-specific CAD definitions inside the ESC project · John Lauer 21d ago
TestPoint_Pad_D1.0mm.kicad_mod Keep Astra board-specific CAD definitions inside the ESC project · John Lauer 21d ago
TestPoint_Pad_D1.5mm.kicad_mod Keep Astra board-specific CAD definitions inside the ESC project · John Lauer 21d ago

esc-copper-test-pads

test point; exact purchased ordering code not specified by the source board.

Used at TP8, TP17, TP5, TP4, TP7, TP3, TP16, TP20, TP9, TP1, TP19, TP12, TP13, TP11, TP15, TP2, TP10, TP14, TP6, TP18, TP21 on Astra ESC G431.

Identity and source

Manufacturer: not stated in the source board. Exact identity comes from the board properties or the supplier code resolution retained in provenance.json. Source descriptions are reproduced as design metadata, not independently qualified electrical ratings.

This is a CAD land-pattern page, not an identified purchasable component. Test pads are bare PCB copper. Where applicable, a connector or jumper ordering code still needs selection; no arbitrary MPN is assigned.

Reusable CAD

The footprint is extracted from the actual final board with board position, nets and UUIDs removed. The symbol is extracted from the published source schematic where available. Verify pin numbering and land dimensions before use in a new design.

3D model status: no verified standalone 3D model is published on this page yet. Nonportable developer paths were removed from the reusable footprint; original references are retained in provenance. This page does not imply a completed manufacturer CAD bundle.