by John Lauer
A two-channel optical displacement instrument with a current-controlled rear laser diode, two photodiode front ends, and a Raspberry Pi Pico digitizer.
707ea4a
Self-mixing interferometer
Inspired by Breaking Taps' self-mixing interferometer video, The Simplest Interferometer is Actually Complicated.
Returned light re-enters the laser cavity and modulates its optical power. The monitor photodiode measures those fringes. A fringe corresponds to one half-wavelength of motion along the beam, and its sawtooth slope reverses with the direction of travel. Use a diode specified for single longitudinal mode to avoid the amplitude beats seen with multiple modes.
- Optical setup and shopping list
- Board datasheet
- KiCad source · Manufacturing files
- Design calculations
- Full-scale laser-current simulation results
Original project work is distributed under the MIT License. CAD attribution is in Third-party notices.
Board views and design evidence
Front face with the Pico connector rows, analog stages, regulator thermal pads and bolted MOSFET land.
Rear face with the power-dropping resistors and the optical polarity matrix.
KiCad schematic preview. Download the PDF to zoom into the electrical blocks.
Simulated diode current at the rated full-scale command through startup and shutdown.
Calculated mounting-land temperature rises from the 13.2 V load envelope.
# Self-mixing interferometer
Inspired by Breaking Taps' self-mixing interferometer video, [The Simplest Interferometer is Actually Complicated](https://www.youtube.com/watch?v=k4AEZ35VklM).
Returned light re-enters the laser cavity and modulates its optical power. The monitor photodiode measures those fringes. A fringe corresponds to one half-wavelength of motion along the beam, and its sawtooth slope reverses with the direction of travel. Use a diode specified for single longitudinal mode to avoid the amplitude beats seen with multiple modes.

- [Optical setup and shopping list](docs/optical-setup.md)
- [Board datasheet](docs/board-datasheet.pdf)
- [KiCad source](self-mixing-interferometer-source.zip) · [Manufacturing files](self-mixing-interferometer-fab.zip)
- [Design calculations](design/calcs.json)
- [Full-scale laser-current simulation results](sim/laser-results.json)
Original project work is distributed under the MIT License. CAD attribution is in [Third-party notices](THIRD-PARTY-NOTICES.md).
## Board views and design evidence

Front face with the Pico connector rows, analog stages, regulator thermal pads and bolted MOSFET land.

Rear face with the power-dropping resistors and the optical polarity matrix.

KiCad schematic preview. Download the PDF to zoom into the electrical blocks.

Simulated diode current at the rated full-scale command through startup and shutdown.

Calculated mounting-land temperature rises from the 13.2 V load envelope.