by John Lauer
A two-channel optical displacement instrument with a current-controlled rear laser diode, two photodiode front ends, and a Raspberry Pi Pico digitizer.
707ea4a
Third-party CAD and model references
The design, calculations, illustrations and documentation created for this project use the MIT License.
The schematic and PCB use standard KiCad library elements. KiCad's library license is CC BY-SA 4.0 with the design exception. The exception permits distributing this design under MIT. Redistributed KiCad library material retains its upstream terms. KiCad library license and exception
The Raspberry Pi Pico model uses the manufacturer’s Pico R3 mechanical geometry, positioned in the socket datum and colored for the assembly view. Supplier-provided CAD retains its upstream notices. Vendor simulation models are referenced in the engineering notes and obtained from their manufacturers. Pico mechanical CAD
# Third-party CAD and model references
The design, calculations, illustrations and documentation created for this project use the MIT License.
The schematic and PCB use standard KiCad library elements. KiCad's library license is CC BY-SA 4.0 with the design exception. The exception permits distributing this design under MIT. Redistributed KiCad library material retains its upstream terms. [KiCad library license and exception](https://www.kicad.org/libraries/license/)
The Raspberry Pi Pico model uses the manufacturer’s Pico R3 mechanical geometry, positioned in the socket datum and colored for the assembly view. Supplier-provided CAD retains its upstream notices. Vendor simulation models are referenced in the engineering notes and obtained from their manufacturers. [Pico mechanical CAD](https://pip.raspberrypi.com/categories/610)