by John Lauer
A two-channel optical displacement instrument with a current-controlled rear laser diode, two photodiode front ends, and a Raspberry Pi Pico digitizer.
Self-mixing interferometer
Inspired by Breaking Taps' self-mixing interferometer video, The Simplest Interferometer is Actually Complicated.
Returned light re-enters the laser cavity and modulates its optical power. The monitor photodiode measures those fringes. A fringe corresponds to one half-wavelength of motion along the beam, and its sawtooth slope reverses with the direction of travel. Use a diode specified for single longitudinal mode to avoid the amplitude beats seen with multiple modes.
- Optical setup and shopping list
- Board datasheet
- KiCad source ยท Manufacturing files
- Design calculations
- Full-scale laser-current simulation results
Original project work is distributed under the MIT License. CAD attribution is in Third-party notices.
Board views and design evidence
Front face with the Pico connector rows, analog stages, regulator thermal pads and bolted MOSFET land.
Rear face with the power-dropping resistors and the optical polarity matrix.
KiCad schematic preview. Download the PDF to zoom into the electrical blocks.
Simulated diode current at the rated full-scale command through startup and shutdown.
Calculated mounting-land temperature rises from the 13.2 V load envelope.