Generated by kicad-footprint-generator · KiCad file format 20260206
TPS65265RHBR
Texas Instruments · DC-DC Converters · VQFN-32-EP(5x5)
TPS65265RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V7V | power_out | Internal LDO output 6.1V typical for gate drivers and controller; connect 10µF capacitor to power ground. |
| 2 | PGOOD | tri_state | Open-drain output asserts low if any buck output voltage deviates from 92.5%-107.5% of 0.6V reference due to thermal shutdown, overcurrent, undervoltage, or enable shutdown. |
| 3 | EN1 | input | Enable input for buck1 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider. |
| 4 | EN2 | input | Enable input for buck2 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider. |
| 5 | EN3 | input | Enable input for buck3 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider. |
| 6 | FB2 | input | Feedback Kelvin sensing input for buck2 output voltage; connect to buck2 resistor divider (0.6V reference). |
| 7 | COMP2 | output | Error amplifier output for buck2 loop compensation; connect series RC network for peak current mode control loop. |
| 8 | MODE | input | Mode control input: floating or high for independent buck control via EN1/EN2/EN3; low for automatic power sequencing. |
| 9 | BST2 | power_in | Bootstrap supply for buck2 high-side gate driver; connect 47nF capacitor from BST2 to LX2 (BST-LX UVLO threshold 2.2V). |
| 10 | PGND2 | power_in | Power ground for buck2; connect as close as practical to negative terminal of PVIN2 ceramic capacitor. |
| 11 | LX2 | output | Switching node for buck2 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN2 voltage. |
| 12 | PVIN2 | power_in | Input power supply for buck2 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor. |
| 13 | PVIN3 | power_in | Input power supply for buck3 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor. |
| 14 | LX3 | output | Switching node for buck3 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN3 voltage. |
| 15 | PGND3 | power_in | Power ground for buck3; connect as close as practical to negative terminal of PVIN3 ceramic capacitor. |
| 16 | BST3 | power_in | Bootstrap supply for buck3 high-side gate driver; connect 47nF capacitor from BST3 to LX3 (BST-LX UVLO threshold 2.2V). |
| 17 | SEQ_DLY | input | Sequencing delay programming pin with 3µA pullup; connect capacitor to set buck power-up sequence interval delay time. |
| 18 | COMP3 | output | Error amplifier output for buck3 loop compensation; connect series RC network for peak current mode control loop. |
| 19 | FB3 | input | Feedback Kelvin sensing input for buck3 output voltage; connect to buck3 resistor divider (0.6V reference). |
| 20 | ROSC | input | Oscillator frequency programming pin; connect external resistor to set switching frequency from 250kHz to 2.3MHz (82.5kΩ sets 610kHz typical). |
| 21 | AGND | power_in | Analog ground common to all buck controllers and analog circuits; connect to power ground plane. |
| 22 | FB1 | input | Feedback Kelvin sensing input for buck1 output voltage; connect to buck1 resistor divider (0.6V reference). |
| 23 | COMP1 | output | Error amplifier output for buck1 loop compensation; connect series RC network for peak current mode control loop. |
| 24 | PG_DLY | input | PGOOD delay programming pin with 3µA pullup; connect external capacitor to set PGOOD assertion delay time (1.5V threshold). |
| 25 | BST1 | power_in | Bootstrap supply for buck1 high-side gate driver; connect 47nF capacitor from BST1 to LX1 (BST-LX UVLO threshold 2.2V). |
| 26 | PGND1 | power_in | Power ground for buck1; connect as close as practical to negative terminal of PVIN1 ceramic capacitor. |
| 27 | PGND1 | power_in | Power ground for buck1 (second ground pin); connect as close as practical to negative terminal of PVIN1 ceramic capacitor. |
| 28 | LX1 | output | Switching node for buck1 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN1 voltage. |
| 29 | LX1 | output | Switching node for buck1 inductor connection (second pin); voltage swings from one diode drop below ground to PVIN1 voltage. |
| 30 | PVIN1 | power_in | Input power supply for buck1 (4.5V to 17V operating range); connect as close as practical to positive terminal of 22µF ceramic capacitor. |
| 31 | PVIN1 | power_in | Input power supply for buck1 (second connection); connect as close as practical to positive terminal of 22µF ceramic capacitor. |
| 32 | PSM | input | Pulse skipping mode control: tie high or float for PSM operation; tie low for forced continuous current mode (FCCM). |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| PVIN1, PVIN2, PVIN3, PGOOD voltage | PVIN1, PVIN2, PVIN3, PGOOD | -0.3 | 20 | V | over operating free-air temperature range | 5 | |
| LX1, LX2, LX3 voltage | LX1, LX2, LX3 | -1 | 19 | V | over operating free-air temperature range | 5 | |
| LX1, LX2, LX3 voltage transient | LX1, LX2, LX3 | -1 | 21 | V | maximum withstand voltage transient <10 ns | 5 | |
| BST1, BST2, BST3 voltage referenced to LX1, LX2, LX3 | BST1, BST2, BST3 | -0.3 | 7 | V | referenced to LX1, LX2, LX3 pins respectively | 5 | |
| EN1, EN2, EN3, V7V, MODE, PSM voltage | EN1, EN2, EN3, V7V, MODE, PSM | -0.3 | 7 | V | over operating free-air temperature range | 5 | |
| FB1, FB2, FB3, COMP1, COMP2, COMP3, ROSC, SEQ_DLY, PG_DLY voltage | FB1, FB2, FB3, COMP1, COMP2, COMP3, ROSC, SEQ_DLY, PG_DLY | -0.3 | 3.6 | V | over operating free-air temperature range | 5 | |
| AGND, PGND1, PGND2, PGND3 voltage | AGND, PGND1, PGND2, PGND3 | -0.3 | 0.3 | V | over operating free-air temperature range | 5 | |
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 5 | ||
| PVIN1, PVIN2, PVIN3 input voltage | PVIN1, PVIN2, PVIN3 | 4.5 | 17 | V | over operating free-air temperature range | 5 | |
| LX1, LX2, LX3 voltage transient | LX1, LX2, LX3 | -0.8 | 19 | V | Maximum withstand voltage transient <10 ns | 5 | |
| BST1, BST2, BST3 voltage referenced to LX pins | BST1, BST2, BST3 | -0.1 | 6.8 | V | referenced to LX1, LX2, LX3 pins respectively | 5 | |
| EN1, EN2, EN3, V7V, MODE, PSM voltage | EN1, EN2, EN3, V7V, MODE, PSM | -0.1 | 6.3 | V | over operating free-air temperature range | 5 | |
| FB1, FB2, FB3, COMP1, COMP2, COMP3, ROSC, SEQ_DLY, PG_DLY voltage | FB1, FB2, FB3, COMP1, COMP2, COMP3, ROSC, SEQ_DLY, PG_DLY | -0.1 | 3.3 | V | over operating free-air temperature range | 5 | |
| Operating junction temperature | TJ | -40 | 125 | °C | over operating free-air temperature range | 5 | |
| Human-body model ESD | V(ESD) | -2000 | 2000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 5 | |
| Charged-device model ESD | V(ESD) | -1000 | 1000 | V | CDM, per JEDEC JESD22-C101 | 5 | |
| Input voltage range | VIN | 4.5 | 17 | V | 7 | ||
| VIN undervoltage lockout, rising | UVLO | 3.6 | 3.8 | 4 | V | VIN rising | 7 |
| VIN undervoltage lockout, falling | UVLO | 3 | 3.2 | 3.4 | V | VIN falling | 7 |
| Shutdown supply current | IDDSDN | 9 | 11.5 | 14 | µA | PVIN = 12 V, EN1 = EN2 = EN3 = MODE = 0 V | 7 |
| Input quiescent current without buck1/2/3 switching | IDDQ_NSW | 550 | 680 | 800 | µA | EN1 = EN2 = EN3 = 5 V, FB1 = FB2 = FB3 = 0.8 V | 7 |
| Input quiescent current without buck1 switching | IDDQ_NSW1 | 280 | 350 | 425 | µA | EN1 = 5 V, EN2 = EN3 = 0 V, FB1 = 0.8 V | 7 |
| Input quiescent current without buck2 switching | IDDQ_NSW2 | 280 | 350 | 425 | µA | EN2 = 5 V, EN1 = EN3 = 0 V, FB2 = 0.8 V | 7 |
| Input quiescent current without buck3 switching | IDDQ_NSW3 | 280 | 350 | 425 | µA | EN3 = 5 V, EN1 = EN2 = 0 V, FB3 = 0.8 V | 7 |
| V7V LDO output voltage | V7V | 5.9 | 6.1 | 6.3 | V | PVIN1 = 12 V, V7V load current = 0 A | 7 |
| V7V LDO current limit | IOCP_V7V | 110 | 177 | 235 | mA | 7 | |
| Feedback voltage | VFB | 0.592 | 0.6 | 0.608 | V | VCOMP = 1.2 V | 7 |
| EN1/2/3 high-level input voltage | VENXH | 1.08 | 1.15 | 1.22 | V | 7 | |
| EN1/2/3 low-level input voltage | VENXL | 1.06 | 1.12 | 1.17 | V | 7 | |
| EN1/2/3 pullup current | IENX1 | 2.3 | 2.9 | 3.4 | µA | ENx = 1 V | 7 |
| EN1/2/3 pullup current | IENX2 | 5.1 | 6 | 6.8 | µA | ENx = 1.5 V | 7 |
| Error amplifier transconductance | Gm_EA | 174 | 350 | 530 | µS | –2 µA < ICOMPX < 2 µA | 7 |
| Buck1 peak inductor current limit | ILIMIT1 | 6 | 8 | 9.6 | A | 7 | |
| Buck1 low-side source current limit | ILIMITSOURCE1 | 5.3 | 7.7 | 10 | A | 7 | |
| Buck2 peak inductor current limit | ILIMIT2 | 3.85 | 5.2 | 6.65 | A | 7 | |
| Buck2 low-side source current limit | ILIMITSOURCE2 | 3 | 4.8 | 5.5 | A | 7 | |
| Buck3 peak inductor current limit | ILIMIT3 | 2.6 | 3.6 | 4.45 | A | 7 | |
| Buck3 low-side source current limit | ILIMITSOURCE3 | 2.6 | 3.7 | 4.6 | A | 7 | |
| MODE high-level input voltage | VMODE_H | 2.4 | 2.6 | 2.8 | V | 8 | |
| MODE low-level input voltage | VMODE_L | 0.11 | 0.16 | 0.23 | V | 8 | |
| PG_DLY threshold | VPG_DLYTH | 1.4 | 1.5 | 1.6 | V | 8 | |
| PG_DLY pullup current | IPG_DLY | 2 | 3 | 4.1 | µA | PG_DLY = 0.5 V | 8 |
| SEQ_DLY threshold 1 | VSEQ_DLYTH1 | 0.7 | 0.75 | 0.8 | V | 8 | |
| SEQ_DLY threshold 2 | VSEQ_DLYTH2 | 1.4 | 1.5 | 1.58 | V | 8 | |
| SEQ_DLY pullup current | ISEQ_DLY | 2 | 3 | 4.1 | µA | SEQ_DLY = 0.5 V | 8 |
| PSM pin high-level input voltage | VPSMH | 1.3 | 1.4 | 1.55 | V | 8 | |
| PSM pin low-level input voltage | VPSML | 1 | 1.1 | 1.2 | V | 8 | |
| Switching frequency | FSW | 580 | 610 | 640 | kHz | ROSC = 82.5 kΩ | 8 |
| Switching frequency range | FSW_range | 250 | 2300 | kHz | 8 | ||
| Junction-to-ambient thermal resistance (RHB, 32 pins) | RθJA | 32 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 24.2 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 6.4 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 0.2 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 6.4 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 1.3 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
TPS65265RHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
tps65265rhbr-etched.step/tps65265rhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps65265rhbr.step/tps65265rhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
00ac4ba9df2800c1, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).