main
Ray
tps65265rhbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
b970d78
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328
{
"slug": "tps65265rhbr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments DC-DC Converters, VQFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"tps65265rhbr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps65265rhbr.kicad_sym",
"tps65265rhbr.kicad_mod",
"tps65265rhbr.glb",
"tps65265rhbr.step",
"tps65265rhbr.lbr",
"docs/hero.png",
"docs/tps65265rhbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "TPS65265RHBR",
"manufacturer": "Texas Instruments",
"package": "VQFN-32-EP(5x5)",
"pin_count": 33,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps65265",
"parts": {
"symbol": "tps65265rhbr.kicad_sym",
"footprint": "tps65265rhbr.kicad_mod",
"model_3d": "tps65265rhbr-etched.glb",
"model_3d_plain": "tps65265rhbr.glb",
"model_3d_step": "tps65265rhbr-etched.step",
"model_3d_step_plain": "tps65265rhbr.step",
"lbr": "tps65265rhbr.lbr"
},
"distributor_links": {
"lcsc": "C545179"
},
"pins": [
{
"number": "1",
"name": "V7V",
"type": "power_out",
"description": "Internal LDO output 6.1V typical for gate drivers and controller; connect 10µF capacitor to power ground."
},
{
"number": "2",
"name": "PGOOD",
"type": "tri_state",
"description": "Open-drain output asserts low if any buck output voltage deviates from 92.5%-107.5% of 0.6V reference due to thermal shutdown, overcurrent, undervoltage, or enable shutdown."
},
{
"number": "3",
"name": "EN1",
"type": "input",
"description": "Enable input for buck1 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider."
},
{
"number": "4",
"name": "EN2",
"type": "input",
"description": "Enable input for buck2 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider."
},
{
"number": "5",
"name": "EN3",
"type": "input",
"description": "Enable input for buck3 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider."
},
{
"number": "6",
"name": "FB2",
"type": "input",
"description": "Feedback Kelvin sensing input for buck2 output voltage; connect to buck2 resistor divider (0.6V reference)."
},
{
"number": "7",
"name": "COMP2",
"type": "output",
"description": "Error amplifier output for buck2 loop compensation; connect series RC network for peak current mode control loop."
},
{
"number": "8",
"name": "MODE",
"type": "input",
"description": "Mode control input: floating or high for independent buck control via EN1/EN2/EN3; low for automatic power sequencing."
},
{
"number": "9",
"name": "BST2",
"type": "power_in",
"description": "Bootstrap supply for buck2 high-side gate driver; connect 47nF capacitor from BST2 to LX2 (BST-LX UVLO threshold 2.2V)."
},
{
"number": "10",
"name": "PGND2",
"type": "power_in",
"description": "Power ground for buck2; connect as close as practical to negative terminal of PVIN2 ceramic capacitor."
},
{
"number": "11",
"name": "LX2",
"type": "output",
"description": "Switching node for buck2 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN2 voltage."
},
{
"number": "12",
"name": "PVIN2",
"type": "power_in",
"description": "Input power supply for buck2 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor."
},
{
"number": "13",
"name": "PVIN3",
"type": "power_in",
"description": "Input power supply for buck3 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor."
},
{
"number": "14",
"name": "LX3",
"type": "output",
"description": "Switching node for buck3 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN3 voltage."
},
{
"number": "15",
"name": "PGND3",
"type": "power_in",
"description": "Power ground for buck3; connect as close as practical to negative terminal of PVIN3 ceramic capacitor."
},
{
"number": "16",
"name": "BST3",
"type": "power_in",
"description": "Bootstrap supply for buck3 high-side gate driver; connect 47nF capacitor from BST3 to LX3 (BST-LX UVLO threshold 2.2V)."
},
{
"number": "17",
"name": "SEQ_DLY",
"type": "input",
"description": "Sequencing delay programming pin with 3µA pullup; connect capacitor to set buck power-up sequence interval delay time."
},
{
"number": "18",
"name": "COMP3",
"type": "output",
"description": "Error amplifier output for buck3 loop compensation; connect series RC network for peak current mode control loop."
},
{
"number": "19",
"name": "FB3",
"type": "input",
"description": "Feedback Kelvin sensing input for buck3 output voltage; connect to buck3 resistor divider (0.6V reference)."
},
{
"number": "20",
"name": "ROSC",
"type": "input",
"description": "Oscillator frequency programming pin; connect external resistor to set switching frequency from 250kHz to 2.3MHz (82.5kΩ sets 610kHz typical)."
},
{
"number": "21",
"name": "AGND",
"type": "power_in",
"description": "Analog ground common to all buck controllers and analog circuits; connect to power ground plane."
},
{
"number": "22",
"name": "FB1",
"type": "input",
"description": "Feedback Kelvin sensing input for buck1 output voltage; connect to buck1 resistor divider (0.6V reference)."
},
{
"number": "23",
"name": "COMP1",
"type": "output",
"description": "Error amplifier output for buck1 loop compensation; connect series RC network for peak current mode control loop."
},
{
"number": "24",
"name": "PG_DLY",
"type": "input",
"description": "PGOOD delay programming pin with 3µA pullup; connect external capacitor to set PGOOD assertion delay time (1.5V threshold)."
},
{
"number": "25",
"name": "BST1",
"type": "power_in",
"description": "Bootstrap supply for buck1 high-side gate driver; connect 47nF capacitor from BST1 to LX1 (BST-LX UVLO threshold 2.2V)."
},
{
"number": "26",
"name": "PGND1",
"type": "power_in",
"description": "Power ground for buck1; connect as close as practical to negative terminal of PVIN1 ceramic capacitor."
},
{
"number": "27",
"name": "PGND1",
"type": "power_in",
"description": "Power ground for buck1 (second ground pin); connect as close as practical to negative terminal of PVIN1 ceramic capacitor."
},
{
"number": "28",
"name": "LX1",
"type": "output",
"description": "Switching node for buck1 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN1 voltage."
},
{
"number": "29",
"name": "LX1",
"type": "output",
"description": "Switching node for buck1 inductor connection (second pin); voltage swings from one diode drop below ground to PVIN1 voltage."
},
{
"number": "30",
"name": "PVIN1",
"type": "power_in",
"description": "Input power supply for buck1 (4.5V to 17V operating range); connect as close as practical to positive terminal of 22µF ceramic capacitor."
},
{
"number": "31",
"name": "PVIN1",
"type": "power_in",
"description": "Input power supply for buck1 (second connection); connect as close as practical to positive terminal of 22µF ceramic capacitor."
},
{
"number": "32",
"name": "PSM",
"type": "input",
"description": "Pulse skipping mode control: tie high or float for PSM operation; tie low for forced continuous current mode (FCCM)."
},
{
"number": "33",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Thermal pad has no internal electrical signal bonded per datasheet but is mechanically and thermally; Duplicate pin numbers (26-27, 28-29, 30-31) are intentional in datasheet design for multiple low-imp",
"exposed pad 33 added from the footprint"
],
"pages_sent": 49,
"cost_usd": 0.4649,
"at": "2026-09-23T01:30:24"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps65265",
"pages": 49,
"sha256": "00ac4ba9df2800c1",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps65265rhbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps65265rhbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "8b63d5265771cf259338c3bb114f9de48e18497c9864aae91a8347f698a6776d",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}