main
History Download
Ray tps65265rhbr: specified limits as data (metadata.characteristics, 56 rows from the datasheet) 8ea464f

TPS65265RHBR

Texas Instruments · DC-DC Converters · VQFN-32-EP(5x5)

TPS65265RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V7V power_out Internal LDO output 6.1V typical for gate drivers and controller; connect 10µF capacitor to power ground.
2 PGOOD tri_state Open-drain output asserts low if any buck output voltage deviates from 92.5%-107.5% of 0.6V reference due to thermal shutdown, overcurrent, undervoltage, or enable shutdown.
3 EN1 input Enable input for buck1 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider.
4 EN2 input Enable input for buck2 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider.
5 EN3 input Enable input for buck3 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider.
6 FB2 input Feedback Kelvin sensing input for buck2 output voltage; connect to buck2 resistor divider (0.6V reference).
7 COMP2 output Error amplifier output for buck2 loop compensation; connect series RC network for peak current mode control loop.
8 MODE input Mode control input: floating or high for independent buck control via EN1/EN2/EN3; low for automatic power sequencing.
9 BST2 power_in Bootstrap supply for buck2 high-side gate driver; connect 47nF capacitor from BST2 to LX2 (BST-LX UVLO threshold 2.2V).
10 PGND2 power_in Power ground for buck2; connect as close as practical to negative terminal of PVIN2 ceramic capacitor.
11 LX2 output Switching node for buck2 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN2 voltage.
12 PVIN2 power_in Input power supply for buck2 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor.
13 PVIN3 power_in Input power supply for buck3 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor.
14 LX3 output Switching node for buck3 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN3 voltage.
15 PGND3 power_in Power ground for buck3; connect as close as practical to negative terminal of PVIN3 ceramic capacitor.
16 BST3 power_in Bootstrap supply for buck3 high-side gate driver; connect 47nF capacitor from BST3 to LX3 (BST-LX UVLO threshold 2.2V).
17 SEQ_DLY input Sequencing delay programming pin with 3µA pullup; connect capacitor to set buck power-up sequence interval delay time.
18 COMP3 output Error amplifier output for buck3 loop compensation; connect series RC network for peak current mode control loop.
19 FB3 input Feedback Kelvin sensing input for buck3 output voltage; connect to buck3 resistor divider (0.6V reference).
20 ROSC input Oscillator frequency programming pin; connect external resistor to set switching frequency from 250kHz to 2.3MHz (82.5kΩ sets 610kHz typical).
21 AGND power_in Analog ground common to all buck controllers and analog circuits; connect to power ground plane.
22 FB1 input Feedback Kelvin sensing input for buck1 output voltage; connect to buck1 resistor divider (0.6V reference).
23 COMP1 output Error amplifier output for buck1 loop compensation; connect series RC network for peak current mode control loop.
24 PG_DLY input PGOOD delay programming pin with 3µA pullup; connect external capacitor to set PGOOD assertion delay time (1.5V threshold).
25 BST1 power_in Bootstrap supply for buck1 high-side gate driver; connect 47nF capacitor from BST1 to LX1 (BST-LX UVLO threshold 2.2V).
26 PGND1 power_in Power ground for buck1; connect as close as practical to negative terminal of PVIN1 ceramic capacitor.
27 PGND1 power_in Power ground for buck1 (second ground pin); connect as close as practical to negative terminal of PVIN1 ceramic capacitor.
28 LX1 output Switching node for buck1 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN1 voltage.
29 LX1 output Switching node for buck1 inductor connection (second pin); voltage swings from one diode drop below ground to PVIN1 voltage.
30 PVIN1 power_in Input power supply for buck1 (4.5V to 17V operating range); connect as close as practical to positive terminal of 22µF ceramic capacitor.
31 PVIN1 power_in Input power supply for buck1 (second connection); connect as close as practical to positive terminal of 22µF ceramic capacitor.
32 PSM input Pulse skipping mode control: tie high or float for PSM operation; tie low for forced continuous current mode (FCCM).
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32-EP(5x5)
Category Power Supply Chip
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
PVIN1, PVIN2, PVIN3, PGOOD voltage PVIN1, PVIN2, PVIN3, PGOOD -0.3 20 V over operating free-air temperature range 5
LX1, LX2, LX3 voltage LX1, LX2, LX3 -1 19 V over operating free-air temperature range 5
LX1, LX2, LX3 voltage transient LX1, LX2, LX3 -1 21 V maximum withstand voltage transient <10 ns 5
BST1, BST2, BST3 voltage referenced to LX1, LX2, LX3 BST1, BST2, BST3 -0.3 7 V referenced to LX1, LX2, LX3 pins respectively 5
EN1, EN2, EN3, V7V, MODE, PSM voltage EN1, EN2, EN3, V7V, MODE, PSM -0.3 7 V over operating free-air temperature range 5
FB1, FB2, FB3, COMP1, COMP2, COMP3, ROSC, SEQ_DLY, PG_DLY voltage FB1, FB2, FB3, COMP1, COMP2, COMP3, ROSC, SEQ_DLY, PG_DLY -0.3 3.6 V over operating free-air temperature range 5
AGND, PGND1, PGND2, PGND3 voltage AGND, PGND1, PGND2, PGND3 -0.3 0.3 V over operating free-air temperature range 5
Operating junction temperature TJ -40 150 °C 5
Storage temperature Tstg -55 150 °C 5
PVIN1, PVIN2, PVIN3 input voltage PVIN1, PVIN2, PVIN3 4.5 17 V over operating free-air temperature range 5
LX1, LX2, LX3 voltage transient LX1, LX2, LX3 -0.8 19 V Maximum withstand voltage transient <10 ns 5
BST1, BST2, BST3 voltage referenced to LX pins BST1, BST2, BST3 -0.1 6.8 V referenced to LX1, LX2, LX3 pins respectively 5
EN1, EN2, EN3, V7V, MODE, PSM voltage EN1, EN2, EN3, V7V, MODE, PSM -0.1 6.3 V over operating free-air temperature range 5
FB1, FB2, FB3, COMP1, COMP2, COMP3, ROSC, SEQ_DLY, PG_DLY voltage FB1, FB2, FB3, COMP1, COMP2, COMP3, ROSC, SEQ_DLY, PG_DLY -0.1 3.3 V over operating free-air temperature range 5
Operating junction temperature TJ -40 125 °C over operating free-air temperature range 5
Human-body model ESD V(ESD) -2000 2000 V HBM, per ANSI/ESDA/JEDEC JS-001 5
Charged-device model ESD V(ESD) -1000 1000 V CDM, per JEDEC JESD22-C101 5
Input voltage range VIN 4.5 17 V 7
VIN undervoltage lockout, rising UVLO 3.6 3.8 4 V VIN rising 7
VIN undervoltage lockout, falling UVLO 3 3.2 3.4 V VIN falling 7
Shutdown supply current IDDSDN 9 11.5 14 µA PVIN = 12 V, EN1 = EN2 = EN3 = MODE = 0 V 7
Input quiescent current without buck1/2/3 switching IDDQ_NSW 550 680 800 µA EN1 = EN2 = EN3 = 5 V, FB1 = FB2 = FB3 = 0.8 V 7
Input quiescent current without buck1 switching IDDQ_NSW1 280 350 425 µA EN1 = 5 V, EN2 = EN3 = 0 V, FB1 = 0.8 V 7
Input quiescent current without buck2 switching IDDQ_NSW2 280 350 425 µA EN2 = 5 V, EN1 = EN3 = 0 V, FB2 = 0.8 V 7
Input quiescent current without buck3 switching IDDQ_NSW3 280 350 425 µA EN3 = 5 V, EN1 = EN2 = 0 V, FB3 = 0.8 V 7
V7V LDO output voltage V7V 5.9 6.1 6.3 V PVIN1 = 12 V, V7V load current = 0 A 7
V7V LDO current limit IOCP_V7V 110 177 235 mA 7
Feedback voltage VFB 0.592 0.6 0.608 V VCOMP = 1.2 V 7
EN1/2/3 high-level input voltage VENXH 1.08 1.15 1.22 V 7
EN1/2/3 low-level input voltage VENXL 1.06 1.12 1.17 V 7
EN1/2/3 pullup current IENX1 2.3 2.9 3.4 µA ENx = 1 V 7
EN1/2/3 pullup current IENX2 5.1 6 6.8 µA ENx = 1.5 V 7
Error amplifier transconductance Gm_EA 174 350 530 µS –2 µA < ICOMPX < 2 µA 7
Buck1 peak inductor current limit ILIMIT1 6 8 9.6 A 7
Buck1 low-side source current limit ILIMITSOURCE1 5.3 7.7 10 A 7
Buck2 peak inductor current limit ILIMIT2 3.85 5.2 6.65 A 7
Buck2 low-side source current limit ILIMITSOURCE2 3 4.8 5.5 A 7
Buck3 peak inductor current limit ILIMIT3 2.6 3.6 4.45 A 7
Buck3 low-side source current limit ILIMITSOURCE3 2.6 3.7 4.6 A 7
MODE high-level input voltage VMODE_H 2.4 2.6 2.8 V 8
MODE low-level input voltage VMODE_L 0.11 0.16 0.23 V 8
PG_DLY threshold VPG_DLYTH 1.4 1.5 1.6 V 8
PG_DLY pullup current IPG_DLY 2 3 4.1 µA PG_DLY = 0.5 V 8
SEQ_DLY threshold 1 VSEQ_DLYTH1 0.7 0.75 0.8 V 8
SEQ_DLY threshold 2 VSEQ_DLYTH2 1.4 1.5 1.58 V 8
SEQ_DLY pullup current ISEQ_DLY 2 3 4.1 µA SEQ_DLY = 0.5 V 8
PSM pin high-level input voltage VPSMH 1.3 1.4 1.55 V 8
PSM pin low-level input voltage VPSML 1 1.1 1.2 V 8
Switching frequency FSW 580 610 640 kHz ROSC = 82.5 kΩ 8
Switching frequency range FSW_range 250 2300 kHz 8
Junction-to-ambient thermal resistance (RHB, 32 pins) RθJA 32 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 24.2 °C/W 5
Junction-to-board thermal resistance RθJB 6.4 °C/W 5
Junction-to-top characterization parameter ψJT 0.2 °C/W 5
Junction-to-board characterization parameter ψJB 6.4 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.3 °C/W 6

CAD (KiCad official)

  • Symbol: TPS65265RHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: tps65265rhbr-etched.step / tps65265rhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps65265rhbr.step / tps65265rhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 00ac4ba9df2800c1, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF