main
Ray tps25940aqrvctq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) d16679c
{
  "schema_version": 1,
  "type": "component",
  "slug": "tps25940aqrvctq1",
  "title": "TPS25940AQRVCTQ1",
  "brief": "Texas Instruments Surge Protection Devices (SPDs), WQFN-20(4x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "circuit protection",
    "tps25940aqrvctq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS25940AQRVCTQ1",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-20(4x3)",
    "pin_count": 21,
    "category": "Circuit Protection",
    "subcategory": "Surge Protection Devices (SPDs)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps25940-q1",
    "parts": {
      "symbol": "tps25940aqrvctq1.kicad_sym",
      "footprint": "tps25940aqrvctq1.kicad_mod",
      "model_3d": "tps25940aqrvctq1-etched.glb",
      "model_3d_plain": "tps25940aqrvctq1.glb",
      "model_3d_step": "tps25940aqrvctq1-etched.step",
      "model_3d_step_plain": "tps25940aqrvctq1.step",
      "lbr": "tps25940aqrvctq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2155733",
      "digikey": "296-49001-2-ND",
      "mouser": "595-TPS25940AQRVCTQ1"
    },
    "distributor_check": {
      "checked_at": "2026-09-26T19:14:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-49001-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS25940AQRVCTQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DEVSLP",
        "type": "input",
        "description": "Active-high DevSleep low-power mode control; rising threshold 1.6 V min / 1.85 V typ / 2.0 V max, falling 0.8 V min / 0.96 V typ / 1.1 V max; input leakage 0.6-1.25 µA; leave floating or connect to GND if unused."
      },
      {
        "number": "2",
        "name": "PGOOD",
        "type": "output",
        "description": "Active-high open-drain power-good output; asserted high when PGTH > V(PGTHR) = 0.99 V (typ) and internal FET is fully enhanced; internal pull-down 10-35 Ω; max sink current 10 mA; leave floating if unused."
      },
      {
        "number": "3",
        "name": "PGTH",
        "type": "input",
        "description": "Positive input of the internal power-good comparator; rising threshold V(PGTHR) = 0.97-1.01 V, falling V(PGTHF) = 0.90-0.94 V; leakage ±100 nA max; connect to OUT or GND if unused."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output; one of five paralleled OUT pins (4-8); total RON = 34-64 mΩ (-40 °C to +125 °C); max continuous switch current 4.78 A at TA = 85 °C; all OUT pins must be tied together and connected to the load."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output; paralleled with pins 4, 6, 7, 8; all OUT pins must be connected together and to the load."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output; paralleled with pins 4, 5, 7, 8; all OUT pins must be connected together and to the load."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output; paralleled with pins 4, 5, 6, 8; all OUT pins must be connected together and to the load."
      },
      {
        "number": "8",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output; paralleled with pins 4, 5, 6, 7; all OUT pins must be connected together and to the load."
      },
      {
        "number": "9",
        "name": "IN",
        "type": "power_in",
        "description": "Power input and device supply voltage; operating range 2.7 V to 18 V (20 V abs max, 22 V for 10 ms transient); IQ(ON) = 140-270 µA; one of five paralleled IN pins (9-13); all IN pins must be connected together."
      },
      {
        "number": "10",
        "name": "IN",
        "type": "power_in",
        "description": "Power input; paralleled with pins 9, 11, 12, 13; all IN pins must be connected together and to the power source."
      },
      {
        "number": "11",
        "name": "IN",
        "type": "power_in",
        "description": "Power input; paralleled with pins 9, 10, 12, 13; all IN pins must be connected together and to the power source."
      },
      {
        "number": "12",
        "name": "IN",
        "type": "power_in",
        "description": "Power input; paralleled with pins 9, 10, 11, 13; all IN pins must be connected together and to the power source."
      },
      {
        "number": "13",
        "name": "IN",
        "type": "power_in",
        "description": "Power input; paralleled with pins 9, 10, 11, 12; all IN pins must be connected together and to the power source."
      },
      {
        "number": "14",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Enable and programmable undervoltage lockout input; FET turns off when V < V(ENF) = 0.92 V (typ); device enters low-IQ shutdown (IQ < 15 µA) when V < V(SHUTF) = 0.47 V (typ); pin must not be left floating; connect to IN if UVLO not needed."
      },
      {
        "number": "15",
        "name": "OVP",
        "type": "input",
        "description": "Overvoltage protection threshold-setting input; FET opens and FLT asserts when V(OVP) > V(OVPR) = 0.99 V (typ); OVP disable delay 2 µs (typ); tie to GND when not used; leakage ±100 nA max."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all voltages; must be connected to the exposed PowerPAD (pin 21); PowerPAD must be soldered to PCB ground plane with multiple vias for thermal performance; RθJCbot = 3.4 °C/W."
      },
      {
        "number": "17",
        "name": "ILIM",
        "type": "passive",
        "description": "Current-limit programming pin; external resistor from ILIM to GND sets overload and short-circuit current limit via I(LIM) = 89 / R(ILIM); V(ILIM) bias = 0.87 V (typ); R(ILIM) range 16.9 kΩ to 150 kΩ corresponding to I(LIM) 5.3 A to 0.6 A (±8% accuracy)."
      },
      {
        "number": "18",
        "name": "dVdT",
        "type": "passive",
        "description": "Output voltage ramp-rate control pin; external capacitor from dVdT to GND sets output slew rate; I(dVdT) charging current = 1 µA (typ), V(dVdTmax) = 2.88 V (typ), GAIN(dVdT) = 11.9 V/V (typ); leave floating for internal 30 V/ms ramp; C(dVdT) up to 470 nF."
      },
      {
        "number": "19",
        "name": "IMON",
        "type": "output",
        "description": "Analog current monitor output; sources a scaled current proportional to I(OUT) with GAIN(IMON) = 52.3 µA/A (typ), accuracy ±8% for TPS25940A-Q1; external resistor from IMON to GND converts to voltage; max output voltage min([V(IN) - 2.2 V], 6 V); leave floating if unused."
      },
      {
        "number": "20",
        "name": "FLT",
        "type": "output",
        "description": "Active-low open-drain fault indicator; asserts low for undervoltage, overvoltage, reverse voltage (V(REVTH) = -66 mV typ), or thermal shutdown events; internal pull-down resistance 10-30 Ω; max sink current 10 mA; leave open or tie to GND if unused."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed PowerPAD (thermal pad); at GND potential; RθJCbot = 3.4 °C/W; must be soldered to PCB ground plane with multiple vias for optimal thermal and mechanical performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 21 added from the footprint"
        ],
        "pages_sent": 51,
        "cost_usd": 0.568,
        "at": "2026-09-26T19:14:39"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps25940-q1",
        "pages": 51,
        "sha256": "a1b7de698cb52759",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps25940aqrvctq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9305bb1f2217b3a3c4923c5aad9089084cd988b0009a6b8028004dfc00dac347",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps25940aqrvctq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ca9cb3d801b127e68016f6827efdf58e5c540d4b53213e2b6b5bd77c0a441bb7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-20(4x3)",
      "Category": "Circuit Protection",
      "Pins": "21"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps25940aqrvctq1"
  ],
  "discovery_pitch": "TPS25940AQRVCTQ1 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps25940aqrvctq1.kicad_sym",
    "tps25940aqrvctq1.kicad_mod",
    "tps25940aqrvctq1.glb",
    "tps25940aqrvctq1.step",
    "tps25940aqrvctq1.lbr",
    "docs/hero.png",
    "docs/tps25940aqrvctq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}