component
STM32H7B3VIT6
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32H7B3VIT6
STMicroelectronics · ST Microelectronics · LQFP-100(14x14)
STM32H7B3VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant FT_h2 I/O (high-speed low-voltage group, mainly FMC/OCTOSPI); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, OCTOSPIM_P1_IO2, USART10_RX and FMC_A23. |
| 2 | PE3 | bidirectional | 5 V-tolerant FT_h2 I/O; alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX and FMC_A19. |
| 3 | PE4 | bidirectional | 5 V-tolerant FT_h2 I/O; alternate functions include TRACED1, SAI1_D2, DFSDM1_DATIN3, TIM15_CH1N, SPI4_SS, FMC_A20, DCMI_D4/PSSI_D4 and LCD_B0. |
| 4 | PE5 | bidirectional | 5 V-tolerant FT_h2 I/O; alternate functions include TRACED2, SAI1_CK2, DFSDM1_CKIN3, TIM15_CH1, SPI4_MISO, FMC_A21, DCMI_D6/PSSI_D6 and LCD_G0. |
| 5 | PE6 | bidirectional | 5 V-tolerant FT_h2 I/O; alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI2_MCK_B, FMC_A22, DCMI_D7/PSSI_D7 and LCD_G1. |
| 6 | VBAT | power_in | Backup domain supply; backup operating voltage 1.2 V to 3.6 V (Table 22). |
| 7 | PC13 | bidirectional | 5 V-tolerant FT I/O with tamper and RTC additional functions TAMP_IN1/TAMP_OUT2/TAMP_OUT3, RTC_OUT1/RTC_TS and WKUP3. |
| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant FT I/O shared with the low-speed external oscillator input OSC32_IN (LSE). |
| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant FT I/O shared with the low-speed external oscillator output OSC32_OUT (LSE). |
| 10 | VSS | power_in | Ground pin; all VSS and VSSA pins must always be connected to the external supply within the permitted range (Table 19 note). |
| 11 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected. |
| 12 | PH0-OSC_IN | bidirectional | 5 V-tolerant FT I/O shared with the high-speed external oscillator input OSC_IN (HSE, 4-50 MHz). |
| 13 | PH1-OSC_OUT | bidirectional | 5 V-tolerant FT I/O shared with the high-speed external oscillator output OSC_OUT (HSE, 4-50 MHz). |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (RST structure, Table 6). |
| 15 | PC0 | bidirectional | FT_a I/O with analog option (supplied by VDDA); alternate functions include DFSDM1_CKIN0, SAI2_FS_B, FMC_A25, OTG_HS_ULPI_STP and LCD_G2; additional function ADC12_INP10. |
| 16 | PC1 | bidirectional | FT_ah0 I/O with analog option (supplied by VDDA); alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO, SDMMC2_CK and OCTOSPIM_P1_IO4; additional functions ADC12_INP11/ADC12_INN10, TAMP_IN3 and WKUP6. |
| 17 | PC2_C | passive | Analog pad Pxy_C (TT_a) separate from PC2 on this package; the analog switch to the Pxy pad is configured through SYSCFG (Table 7 footnotes 3-4); additional functions ADC2_INP0 and ADC2_INN1. |
| 18 | PC3_C | passive | Analog pad Pxy_C (TT_a) separate from PC3 on this package; the analog switch is configured through SYSCFG (Table 7 footnotes 3-4); additional function ADC2_INP1. |
| 19 | VSSA | power_in | Analog ground pin; must always be connected to the external supply within the permitted range (Table 19 note). |
| 20 | VREF+ | power_in | Positive voltage reference input; included in the external main supply voltage ratings, -0.3 V to 4.0 V (Table 19). |
| 21 | VDDA | power_in | Analog supply voltage, 1.62 V to 3.6 V when the ADC or COMP is used (Table 22). |
| 22 | PA0 | bidirectional | FT_a I/O with analog option; alternate functions include TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, SPI6_SS/I2S6_WS, USART2_CTS/USART2_NSS, UART4_TX and SDMMC2_CMD; additional functions ADC1_INP16 and WKUP1. |
| 23 | PA1 | bidirectional | FT_ah1 I/O with analog option; alternate functions include TIM2_CH2, TIM5_CH2, LPTIM3_OUT, USART2_RTS, UART4_RX, OCTOSPIM_P1_IO3 and LCD_R2; additional functions ADC1_INP17 and ADC1_INN16. |
| 24 | PA2 | bidirectional | FT_a I/O with analog option; alternate functions include TIM2_CH3, TIM5_CH3, TIM15_CH1, USART2_TX, SAI2_SCK_B, MDIOS_MDIO and LCD_R1; additional functions ADC1_INP14 and WKUP2. |
| 25 | PA3 | bidirectional | FT_ah1 I/O with analog option; alternate functions include TIM2_CH4, TIM5_CH4, OCTOSPIM_P1_CLK, TIM15_CH2, I2S6_MCK, USART2_RX and OTG_HS_ULPI_D0; additional function ADC1_INP15. |
| 26 | VSS | power_in | Ground pin; must always be connected to the external supply within the permitted range (Table 19 note). |
| 27 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected. |
| 28 | PA4 | bidirectional | TT_a I/O (3.3 V tolerant) with analog option; alternate functions include TIM5_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, USART2_CK, DCMI_HSYNC/PSSI_DE and LCD_VSYNC; additional functions ADC1_INP18 and DAC1_OUT1. |
| 29 | PA5 | bidirectional | TT_ah0 I/O (3.3 V tolerant) with analog option; alternate functions include PWR_NDSTOP2, TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, OTG_HS_ULPI_CK, PSSI_D14 and LCD_R4; additional functions ADC1_INP19, ADC1_INN18 and DAC1_OUT2. |
| 30 | PA6 | bidirectional | TT_ah1 I/O (3.3 V tolerant) with analog option; alternate functions include TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO/I2S1_SDI, TIM13_CH1, MDIOS_MDC and DCMI_PIXCLK/PSSI_PDCK; additional functions ADC12_INP3 and DAC2_OUT1. |
| 31 | PA7 | bidirectional | FT_ah1 I/O with analog option; alternate functions include TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SDO, TIM14_CH1, OCTOSPIM_P1_IO2, FMC_SDNWE and LCD_VSYNC; additional functions ADC12_INP7 and ADC12_INN3. |
| 32 | PC4 | bidirectional | FT_a I/O with analog option; alternate functions include DFSDM1_CKIN2, I2S1_MCK, SPDIFRX1_IN2, FMC_SDNE0 and LCD_R7; additional functions ADC12_INP4 and COMP1_INM. |
| 33 | PC5 | bidirectional | FT_ah1 I/O with analog option; alternate functions include SAI1_D3, DFSDM1_DATIN2, PSSI_D15, SPDIFRX1_IN3, OCTOSPIM_P1_DQS, FMC_SDCKE0, COMP1_OUT and LCD_DE; additional functions ADC12_INP8 and ADC12_INN4. |
| 34 | PB0 | bidirectional | FT_ah0 I/O with analog option; alternate functions include TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, OCTOSPIM_P1_IO1 and LCD_G1; additional functions ADC12_INP9, ADC12_INN5, OPAMP1_VINP and COMP1_INP. |
| 35 | PB1 | bidirectional | FT_ah0 I/O with analog option; alternate functions include TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, OCTOSPIM_P1_IO0 and LCD_G0; additional functions ADC12_INP5 and COMP1_INM. |
| 36 | PB2 | bidirectional | FT_ah1 I/O with analog option; alternate functions include RTC_OUT2, SAI1_D1, DFSDM1_CKIN1, SAI1_SD_A, SPI3_MOSI/I2S3_SDO, OCTOSPIM_P1_CLK and OCTOSPIM_P1_DQS; additional function COMP1_INP. |
| 37 | PE7 | bidirectional | FT_ah2 I/O with analog option; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, OCTOSPIM_P1_IO4, FMC_D4/FMC_DA4 and EVENTOUT. |
| 38 | PE8 | bidirectional | FT_ah2 I/O with analog option; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, OCTOSPIM_P1_IO5, FMC_D5/FMC_DA5 and COMP2_OUT. |
| 39 | PE9 | bidirectional | FT_ah2 I/O with analog option; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, OCTOSPIM_P1_IO6 and FMC_D6/FMC_DA6. |
| 40 | PE10 | bidirectional | FT_ah2 I/O with analog option; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, OCTOSPIM_P1_IO7, FMC_D7/FMC_DA7 and COMP2_INM. |
| 41 | PE11 | bidirectional | FT_ah2 I/O with analog option; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_SS, SAI2_SD_B, OCTOSPIM_P1_NCS, FMC_D8/FMC_DA8, LCD_G3 and COMP2_INP. |
| 42 | PE12 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9/FMC_DA9, COMP1_OUT and LCD_B4. |
| 43 | PE13 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10/FMC_DA10, COMP2_OUT and LCD_DE. |
| 44 | PE14 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11/FMC_DA11 and LCD_CLK. |
| 45 | PE15 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_BKIN, USART10_CK, FMC_D12/FMC_DA12, TIM1_BKIN_COMP12 and LCD_R7. |
| 46 | PB10 | bidirectional | FT_f I/O (I2C FM+ option); alternate functions include TIM2_CH3, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, OCTOSPIM_P1_NCS, OTG_HS_ULPI_D3 and LCD_G4. |
| 47 | PB11 | bidirectional | FT_f I/O (I2C FM+ option); alternate functions include TIM2_CH4, LPTIM2_ETR, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4 and LCD_G5. |
| 48 | VCAP | power_in | Connection for the external VCORE decoupling capacitor; with the internal regulator OFF, the external VCORE voltage (1.0-1.35 V depending on VOS, Table 22) must be supplied on VCAP pins. |
| 49 | VSS | power_in | Ground pin; must always be connected to the external supply within the permitted range (Table 19 note). |
| 50 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected. |
| 51 | PB12 | bidirectional | FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA, SPI2_SS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and UART5_RX. |
| 52 | PB13 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX, OTG_HS_ULPI_D6, SDMMC1_D0 and UART5_TX. |
| 53 | PB14 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and LCD_CLK. |
| 54 | PB15 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and LCD_G7. |
| 55 | PD8 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKIN3, USART3_TX, SPDIFRX1_IN1 and FMC_D13/FMC_DA13. |
| 56 | PD9 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_DATIN3, USART3_RX and FMC_D14/FMC_DA14. |
| 57 | PD10 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKOUT, DFSDM2_CKOUT, USART3_CK, FMC_D15/FMC_DA15 and LCD_B3. |
| 58 | PD11 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS, OCTOSPIM_P1_IO0, SAI2_SD_A and FMC_A16/FMC_CLE. |
| 59 | PD12 | bidirectional | FT_fh2 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include LPTIM1_IN1, TIM4_CH1, LPTIM2_IN1, I2C4_SCL, USART3_RTS, OCTOSPIM_P1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE and DCMI_D12/PSSI_D12. |
| 60 | PD13 | bidirectional | FT_fh2 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, OCTOSPIM_P1_IO3, SAI2_SCK_A, UART9_RTS, FMC_A18 and DCMI_D13/PSSI_D13. |
| 61 | PD14 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_DA0. |
| 62 | PD15 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM4_CH4, UART8_RTS, UART9_TX and FMC_D1/FMC_DA1. |
| 63 | PC6 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, I2S2_MCK, USART6_TX, FMC_NWAIT, SDMMC1_D6 and DCMI_D0/PSSI_D0. |
| 64 | PC7 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, I2S3_MCK, USART6_RX, FMC_NE1, SWPMI_TX, SDMMC1_D7 and DCMI_D1/PSSI_D1. |
| 65 | PC8 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT, SWPMI_RX, SDMMC1_D0 and DCMI_D2/PSSI_D2. |
| 66 | PC9 | bidirectional | FT_fh0 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, OCTOSPIM_P1_IO0, SWPMI_SUSPEND, SDMMC1_D1 and DCMI_D3/PSSI_D3. |
| 67 | PA8 | bidirectional | FT_fh0 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_HS_SOF, UART7_RX and LCD_R6. |
| 68 | PA9 | bidirectional | FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0/PSSI_D0 and LCD_R5; additional function OTG_HS_VBUS. |
| 69 | PA10 | bidirectional | FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX, OTG_HS_ID, MDIOS_MDIO, DCMI_D1/PSSI_D1 and LCD_B1. |
| 70 | PA11 | bidirectional | FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_SS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX and LCD_R4; additional function OTG_HS_DM. |
| 71 | PA12 | bidirectional | FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX and LCD_R5; additional function OTG_HS_DP. |
| 72 | PA13 | bidirectional | 5 V-tolerant FT I/O; function after reset is JTMS/SWDIO (SWD debug data), with EVENTOUT as alternate function. |
| 73 | VCAP | power_in | Connection for the external VCORE decoupling capacitor; with the internal regulator OFF, the external VCORE voltage (1.0-1.35 V depending on VOS, Table 22) must be supplied on VCAP pins. |
| 74 | VSS | power_in | Ground pin; must always be connected to the external supply within the permitted range (Table 19 note). |
| 75 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected. |
| 76 | PA14(JTCK/SWCLK) | bidirectional | 5 V-tolerant FT I/O; function after reset is JTCK/SWCLK (SWD clock), with EVENTOUT as alternate function. |
| 77 | PA15(JTDI) | bidirectional | 5 V-tolerant FT I/O; function after reset is JTDI, with alternate functions including TIM2_CH1/TIM2_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, UART4_RTS, UART7_TX and LCD_B6. |
| 78 | PC10 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPIM_P1_IO1, SWPMI_RX, SDMMC1_D2 and DCMI_D8/PSSI_D8. |
| 79 | PC11 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPIM_P1_NCS, SDMMC1_D3 and DCMI_D4/PSSI_D4. |
| 80 | PC12 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED3, TIM15_CH1, DFSDM2_CKOUT, SPI6_SCK/I2S6_CK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9/PSSI_D9. |
| 81 | PD0 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKIN6, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_DA2 and LCD_B1. |
| 82 | PD1 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_DATIN6, UART4_TX, FDCAN1_TX and FMC_D3/FMC_DA3. |
| 83 | PD2 | bidirectional | FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, LCD_B7, SDMMC1_CMD, DCMI_D11/PSSI_D11 and LCD_B2. |
| 84 | PD3 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5 and LCD_G7. |
| 85 | PD4 | bidirectional | FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include USART2_RTS, OCTOSPIM_P1_IO4, FMC_NOE and EVENTOUT. |
| 86 | PD5 | bidirectional | FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE and EVENTOUT. |
| 87 | PD6 | bidirectional | FT_sh3 I/O (secondary supply VDDMMC, high-speed low-voltage group); alternate functions include SAI1_D1, DFSDM1_CKIN4, SPI3_MOSI/I2S3_SDO, USART2_RX, OCTOSPIM_P1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10 and LCD_B2. |
| 88 | PD7 | bidirectional | FT_sh3 I/O (secondary supply VDDMMC, high-speed low-voltage group); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN0, OCTOSPIM_P1_IO7, SDMMC2_CMD and FMC_NE1. |
| 89 | PB3(JTDO/TRACESWO) | bidirectional | FT_h0 I/O; function after reset is JTDO/TRACESWO, with alternate functions including TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX. |
| 90 | PB4(NJTRST) | bidirectional | FT_h0 I/O; function after reset is NJTRST, with alternate functions including TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI, SPI2_SS/I2S2_WS, SDMMC2_D3 and UART7_TX. |
| 91 | PB5 | bidirectional | FT_h0 I/O (high-speed low-voltage group); alternate functions include TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, I2C4_SMBA, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1, DCMI_D10/PSSI_D10 and UART5_RX. |
| 92 | PB6 | bidirectional | FT_f I/O (I2C FM+ option); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPIM_P1_NCS, FMC_SDNE1, DCMI_D5/PSSI_D5 and UART5_TX. |
| 93 | PB7 | bidirectional | FT_fa I/O (I2C FM+ and analog option); alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, FMC_NL and DCMI_VSYNC/PSSI_RDY; additional function PVD_IN. |
| 94 | BOOT0 | input | Dedicated BOOT0 input pin; input voltage range is 0 to 9 V (Table 22). |
| 95 | PB8 | bidirectional | FT_fsh3 I/O (I2C FM+ option, secondary supply VDDMMC); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX, SDMMC2_D4, SDMMC1_D4 and DCMI_D6/PSSI_D6. |
| 96 | PB9 | bidirectional | FT_fsh3 I/O (I2C FM+ option, secondary supply VDDMMC); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_SS/I2S2_WS, I2C4_SDA, UART4_TX, FDCAN1_TX, SDMMC2_D5, SDMMC1_D5 and DCMI_D7/PSSI_D7. |
| 97 | PE0 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM1_ETR, TIM4_ETR, LPTIM2_ETR, UART8_RX, SAI2_MCK_A, FMC_NBL0, DCMI_D2/PSSI_D2 and LCD_R0. |
| 98 | PE1 | bidirectional | FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3/PSSI_D3 and LCD_R6. |
| 99 | VSS | power_in | Ground pin; must always be connected to the external supply within the permitted range (Table 19 note). |
| 100 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDD, VDDLDO, VDDSMPS, VDDA, VDD33USB, VDDMMC, VBAT, VREF+) | VDDX − VSS | -0.3 | 4 | V | 81 | ||
| Input voltage on FT_xxx pins | VIN | -0.3 | V | 81 | |||
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | 81 | ||
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 81 | ||
| Input voltage on any other pins | VIN | -0.3 | 4 | V | 81 | ||
| Variations between different VDDX power pins of the same domain | /ΔVDDX/ | 50 | mV | 81 | |||
| Variations between all the different ground pins | /VSSx−VSS/ | 50 | mV | 82 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 620 | mA | 82 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 620 | mA | 82 | |||
| Maximum current into each VDD power pin (source) | IVDD | 100 | mA | 82 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS | 100 | mA | 82 | |||
| Output current sunk or sourced by any I/O and control pin | IIO | 20 | mA | 82 | |||
| Output current sunk or sourced by Pxy_C pin | IIO | 1 | mA | Pxy_C pin | 82 | ||
| Total output current sunk by sum of all I/Os and control pins | ΣI(PIN) | 140 | mA | Sunk | 82 | ||
| Total output current sourced by sum of all I/Os and control pins | ΣI(PIN) | 140 | mA | Sourced | 82 | ||
| Injected current on FT_xxx, TT_xx, RST and B pins except PA4, PA5 | IINJ(PIN) | -5 | 0 | mA | 82 | ||
| Injected current on PA4, PA5 | IINJ(PIN) | 0 | 0 | mA | 82 | ||
| Total injected current (sum of all I/Os and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 82 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 82 | ||
| Maximum junction temperature | TJmax | 130 | °C | Limited to 105 °C in VOS0 voltage range | 82 | ||
| ESD voltage (human body model), packages without SMPS | VESD(HBM) | 2000 | V | TA = +25 °C, ANSI/ESDA/JEDEC JS-001; class 2 | 116 | ||
| ESD voltage (charge device model), all LQFP packages and WLCSP | VESD(CDM) | 250 | V | TA = +25 °C, ANSI/ESDA/JEDEC JS-002; class C1 | 116 | ||
| Standard operating voltage | VDD | 1.62 | 3.6 | V | 83 | ||
| Supply voltage for the internal regulator | VDDLDO | 1.62 | 3.6 | V | VDDLDO ≤ VDD | 83 | |
| Standard operating voltage for independent MMC I/Os | VDDMMC | 1.62 | 3.6 | V | Independent MMC I/Os used | 83 | |
| Standard operating voltage, USB domain | VDD33USB | 3 | 3.6 | V | USB used | 83 | |
| Standard operating voltage, USB domain | VDD33USB | 0 | 3.6 | V | USB not used | 83 | |
| Analog operating voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 83 | |
| Analog operating voltage | VDDA | 1.8 | V | DAC used | 83 | ||
| Analog operating voltage | VDDA | 2 | V | OPAMP used | 83 | ||
| Backup operating voltage | VBAT | 1.2 | 3.6 | V | 83 | ||
| Internal regulator ON (LDO or SMPS) core voltage | VCORE | 0.95 | 1 | 1.05 | V | VOS3 (max frequency 88 MHz) | 83 |
| Internal regulator ON (LDO or SMPS) core voltage | VCORE | 1.05 | 1.1 | 1.15 | V | VOS2 (max frequency 160 MHz) | 83 |
| Internal regulator ON (LDO or SMPS) core voltage | VCORE | 1.15 | 1.2 | 1.25 | V | VOS1 (max frequency 225 MHz) | 83 |
| Internal regulator ON (LDO or SMPS) core voltage | VCORE | 1.25 | 1.3 | 1.35 | V | VOS0 (max frequency 280 MHz) | 83 |
| Regulator OFF core voltage (external VCORE on VCAP pins) | VCORE | 1.27 | 1.3 | 1.33 | V | VOS0 (max frequency 280 MHz) | 84 |
| Ambient temperature for the suffix 6 version | TA | -40 | 85 | °C | Maximum power dissipation | 84 | |
| Ambient temperature for the suffix 6 version | TA | -40 | 105 | °C | Low-power dissipation | 84 | |
| Junction temperature range | TJ | -40 | 105 | °C | VOS0 | 84 | |
| Junction temperature range | TJ | -40 | 130 | °C | VOS3, VOS2, VOS1 | 84 | |
| CPU clock frequency | fCPU | 280 | MHz | VOS0 | 84 | ||
| Minimum standard operating voltage for max frequency configuration | VDD | 1.71 | V | VOS0, LDO/SMPS, max frequency 280 MHz | 85 | ||
| Reset temporization after POR released | tRSTTEMPO | 377 | 550 | µs | 91 | ||
| Power-on/power-down reset threshold | VPOR/PDR | 1.62 | 1.67 | 1.71 | V | Rising edge | 91 |
| Power-on/power-down reset threshold | VPOR/PDR | 1.58 | 1.62 | 1.68 | V | Falling edge | 91 |
| Internal reference voltages | VREFINT | 1.18 | 1.216 | 1.255 | V | −40 °C < TJ < 130 °C | 92 |
| Average voltage coefficient | VDDcoeff | 10 | 1370 | ppm/V | 3.0 V < VDD < 3.6 V | 92 | |
| Supply current in Run mode, all peripherals disabled | IDD | 128 | mA | Run, code from ITCM, fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C | 95 | ||
| Supply current in Run mode, all peripherals enabled | IDD | 196 | mA | Run, code from ITCM, fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C | 95 | ||
| Supply current in Sleep mode, all peripherals disabled | IDD(Sleep) | 72 | mA | fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C | 98 | ||
| Supply current in Standby mode | IDD(Standby) | 22 | µA | IWDG OFF, backup SRAM OFF, RTC & LSE OFF, max at 3.6 V, TJ = 105 °C | 99 | ||
| Oscillator frequency (HSE) | F | 4 | 50 | MHz | 108 | ||
| HSI48 frequency | fHSI48 | 47.5 | 48 | 48.5 | MHz | VDD = 3.3 V, TJ = 30 °C | 110 |
| HSI frequency | fHSI | 63.7 | 64 | 64.3 | MHz | VDD = 3.3 V, TJ = 30 °C | 111 |
| CSI frequency | fCSI | 3.96 | 4 | 4.04 | MHz | VDD = 3.3 V, TJ = 30 °C | 111 |
| Wakeup time from Standby mode | tWUSTDBY | 257 | 330 | µs | 105 |
CAD (KiCad official)
- Symbol:
STM32H7B3VIT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32h7b3vit6-etched.step/stm32h7b3vit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32h7b3vit6.step/stm32h7b3vit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (238 pp, sha256
79cfcb3fc210a55d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).