component
STM32H7B3VIT6
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
21a8b99
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793
{
"slug": "stm32h7b3vit6",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
"tags": [
"component",
"embedded processors & controllers",
"stm32h7b3vit6",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"stm32h7b3vit6.kicad_sym",
"stm32h7b3vit6.kicad_mod",
"stm32h7b3vit6.glb",
"stm32h7b3vit6.step",
"stm32h7b3vit6.lbr",
"docs/hero.png",
"docs/stm32h7b3vit6-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"stm32h7b3vit6-hero.glb",
"stm32h7b3vit6-hero.overlay.json"
],
"component": {
"mpn": "STM32H7B3VIT6",
"manufacturer": "STMicroelectronics",
"package": "LQFP-100(14x14)",
"pin_count": 100,
"category": "Embedded Processors & Controllers",
"subcategory": "ST Microelectronics",
"datasheet": "https://www.st.com/resource/en/datasheet/stm32h7b3vi.pdf",
"parts": {
"symbol": "stm32h7b3vit6.kicad_sym",
"footprint": "stm32h7b3vit6.kicad_mod",
"model_3d": "stm32h7b3vit6-hero.glb",
"model_3d_plain": "stm32h7b3vit6.glb",
"model_3d_step": "stm32h7b3vit6-etched.step",
"model_3d_step_plain": "stm32h7b3vit6.step",
"lbr": "stm32h7b3vit6.lbr"
},
"distributor_links": {
"lcsc": "C730232",
"digikey": "497-STM32H7B3VIT6-ND",
"mouser": "511-STM32H7B3VIT6"
},
"distributor_check": {
"checked_at": "2026-11-13T20:19:56Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-STM32H7B3VIT6-ND",
"status": "found"
},
"mouser": {
"pn": "511-STM32H7B3VIT6",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "PE2",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O (high-speed low-voltage group, mainly FMC/OCTOSPI); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, OCTOSPIM_P1_IO2, USART10_RX and FMC_A23."
},
{
"number": "2",
"name": "PE3",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O; alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX and FMC_A19."
},
{
"number": "3",
"name": "PE4",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O; alternate functions include TRACED1, SAI1_D2, DFSDM1_DATIN3, TIM15_CH1N, SPI4_SS, FMC_A20, DCMI_D4/PSSI_D4 and LCD_B0."
},
{
"number": "4",
"name": "PE5",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O; alternate functions include TRACED2, SAI1_CK2, DFSDM1_CKIN3, TIM15_CH1, SPI4_MISO, FMC_A21, DCMI_D6/PSSI_D6 and LCD_G0."
},
{
"number": "5",
"name": "PE6",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O; alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI2_MCK_B, FMC_A22, DCMI_D7/PSSI_D7 and LCD_G1."
},
{
"number": "6",
"name": "VBAT",
"type": "power_in",
"description": "Backup domain supply; backup operating voltage 1.2 V to 3.6 V (Table 22)."
},
{
"number": "7",
"name": "PC13",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O with tamper and RTC additional functions TAMP_IN1/TAMP_OUT2/TAMP_OUT3, RTC_OUT1/RTC_TS and WKUP3."
},
{
"number": "8",
"name": "PC14-OSC32_IN",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O shared with the low-speed external oscillator input OSC32_IN (LSE)."
},
{
"number": "9",
"name": "PC15-OSC32_OUT",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O shared with the low-speed external oscillator output OSC32_OUT (LSE)."
},
{
"number": "10",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; all VSS and VSSA pins must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "11",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
},
{
"number": "12",
"name": "PH0-OSC_IN",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O shared with the high-speed external oscillator input OSC_IN (HSE, 4-50 MHz)."
},
{
"number": "13",
"name": "PH1-OSC_OUT",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O shared with the high-speed external oscillator output OSC_OUT (HSE, 4-50 MHz)."
},
{
"number": "14",
"name": "NRST",
"type": "bidirectional",
"description": "Bidirectional reset pin with embedded weak pull-up resistor (RST structure, Table 6)."
},
{
"number": "15",
"name": "PC0",
"type": "bidirectional",
"description": "FT_a I/O with analog option (supplied by VDDA); alternate functions include DFSDM1_CKIN0, SAI2_FS_B, FMC_A25, OTG_HS_ULPI_STP and LCD_G2; additional function ADC12_INP10."
},
{
"number": "16",
"name": "PC1",
"type": "bidirectional",
"description": "FT_ah0 I/O with analog option (supplied by VDDA); alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO, SDMMC2_CK and OCTOSPIM_P1_IO4; additional functions ADC12_INP11/ADC12_INN10, TAMP_IN3 and WKUP6."
},
{
"number": "17",
"name": "PC2_C",
"type": "passive",
"description": "Analog pad Pxy_C (TT_a) separate from PC2 on this package; the analog switch to the Pxy pad is configured through SYSCFG (Table 7 footnotes 3-4); additional functions ADC2_INP0 and ADC2_INN1."
},
{
"number": "18",
"name": "PC3_C",
"type": "passive",
"description": "Analog pad Pxy_C (TT_a) separate from PC3 on this package; the analog switch is configured through SYSCFG (Table 7 footnotes 3-4); additional function ADC2_INP1."
},
{
"number": "19",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "20",
"name": "VREF+",
"type": "power_in",
"description": "Positive voltage reference input; included in the external main supply voltage ratings, -0.3 V to 4.0 V (Table 19)."
},
{
"number": "21",
"name": "VDDA",
"type": "power_in",
"description": "Analog supply voltage, 1.62 V to 3.6 V when the ADC or COMP is used (Table 22)."
},
{
"number": "22",
"name": "PA0",
"type": "bidirectional",
"description": "FT_a I/O with analog option; alternate functions include TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, SPI6_SS/I2S6_WS, USART2_CTS/USART2_NSS, UART4_TX and SDMMC2_CMD; additional functions ADC1_INP16 and WKUP1."
},
{
"number": "23",
"name": "PA1",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include TIM2_CH2, TIM5_CH2, LPTIM3_OUT, USART2_RTS, UART4_RX, OCTOSPIM_P1_IO3 and LCD_R2; additional functions ADC1_INP17 and ADC1_INN16."
},
{
"number": "24",
"name": "PA2",
"type": "bidirectional",
"description": "FT_a I/O with analog option; alternate functions include TIM2_CH3, TIM5_CH3, TIM15_CH1, USART2_TX, SAI2_SCK_B, MDIOS_MDIO and LCD_R1; additional functions ADC1_INP14 and WKUP2."
},
{
"number": "25",
"name": "PA3",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include TIM2_CH4, TIM5_CH4, OCTOSPIM_P1_CLK, TIM15_CH2, I2S6_MCK, USART2_RX and OTG_HS_ULPI_D0; additional function ADC1_INP15."
},
{
"number": "26",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "27",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
},
{
"number": "28",
"name": "PA4",
"type": "bidirectional",
"description": "TT_a I/O (3.3 V tolerant) with analog option; alternate functions include TIM5_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, USART2_CK, DCMI_HSYNC/PSSI_DE and LCD_VSYNC; additional functions ADC1_INP18 and DAC1_OUT1."
},
{
"number": "29",
"name": "PA5",
"type": "bidirectional",
"description": "TT_ah0 I/O (3.3 V tolerant) with analog option; alternate functions include PWR_NDSTOP2, TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, OTG_HS_ULPI_CK, PSSI_D14 and LCD_R4; additional functions ADC1_INP19, ADC1_INN18 and DAC1_OUT2."
},
{
"number": "30",
"name": "PA6",
"type": "bidirectional",
"description": "TT_ah1 I/O (3.3 V tolerant) with analog option; alternate functions include TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO/I2S1_SDI, TIM13_CH1, MDIOS_MDC and DCMI_PIXCLK/PSSI_PDCK; additional functions ADC12_INP3 and DAC2_OUT1."
},
{
"number": "31",
"name": "PA7",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SDO, TIM14_CH1, OCTOSPIM_P1_IO2, FMC_SDNWE and LCD_VSYNC; additional functions ADC12_INP7 and ADC12_INN3."
},
{
"number": "32",
"name": "PC4",
"type": "bidirectional",
"description": "FT_a I/O with analog option; alternate functions include DFSDM1_CKIN2, I2S1_MCK, SPDIFRX1_IN2, FMC_SDNE0 and LCD_R7; additional functions ADC12_INP4 and COMP1_INM."
},
{
"number": "33",
"name": "PC5",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include SAI1_D3, DFSDM1_DATIN2, PSSI_D15, SPDIFRX1_IN3, OCTOSPIM_P1_DQS, FMC_SDCKE0, COMP1_OUT and LCD_DE; additional functions ADC12_INP8 and ADC12_INN4."
},
{
"number": "34",
"name": "PB0",
"type": "bidirectional",
"description": "FT_ah0 I/O with analog option; alternate functions include TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, OCTOSPIM_P1_IO1 and LCD_G1; additional functions ADC12_INP9, ADC12_INN5, OPAMP1_VINP and COMP1_INP."
},
{
"number": "35",
"name": "PB1",
"type": "bidirectional",
"description": "FT_ah0 I/O with analog option; alternate functions include TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, OCTOSPIM_P1_IO0 and LCD_G0; additional functions ADC12_INP5 and COMP1_INM."
},
{
"number": "36",
"name": "PB2",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include RTC_OUT2, SAI1_D1, DFSDM1_CKIN1, SAI1_SD_A, SPI3_MOSI/I2S3_SDO, OCTOSPIM_P1_CLK and OCTOSPIM_P1_DQS; additional function COMP1_INP."
},
{
"number": "37",
"name": "PE7",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, OCTOSPIM_P1_IO4, FMC_D4/FMC_DA4 and EVENTOUT."
},
{
"number": "38",
"name": "PE8",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, OCTOSPIM_P1_IO5, FMC_D5/FMC_DA5 and COMP2_OUT."
},
{
"number": "39",
"name": "PE9",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, OCTOSPIM_P1_IO6 and FMC_D6/FMC_DA6."
},
{
"number": "40",
"name": "PE10",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, OCTOSPIM_P1_IO7, FMC_D7/FMC_DA7 and COMP2_INM."
},
{
"number": "41",
"name": "PE11",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_SS, SAI2_SD_B, OCTOSPIM_P1_NCS, FMC_D8/FMC_DA8, LCD_G3 and COMP2_INP."
},
{
"number": "42",
"name": "PE12",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9/FMC_DA9, COMP1_OUT and LCD_B4."
},
{
"number": "43",
"name": "PE13",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10/FMC_DA10, COMP2_OUT and LCD_DE."
},
{
"number": "44",
"name": "PE14",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11/FMC_DA11 and LCD_CLK."
},
{
"number": "45",
"name": "PE15",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_BKIN, USART10_CK, FMC_D12/FMC_DA12, TIM1_BKIN_COMP12 and LCD_R7."
},
{
"number": "46",
"name": "PB10",
"type": "bidirectional",
"description": "FT_f I/O (I2C FM+ option); alternate functions include TIM2_CH3, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, OCTOSPIM_P1_NCS, OTG_HS_ULPI_D3 and LCD_G4."
},
{
"number": "47",
"name": "PB11",
"type": "bidirectional",
"description": "FT_f I/O (I2C FM+ option); alternate functions include TIM2_CH4, LPTIM2_ETR, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4 and LCD_G5."
},
{
"number": "48",
"name": "VCAP",
"type": "power_in",
"description": "Connection for the external VCORE decoupling capacitor; with the internal regulator OFF, the external VCORE voltage (1.0-1.35 V depending on VOS, Table 22) must be supplied on VCAP pins."
},
{
"number": "49",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "50",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
},
{
"number": "51",
"name": "PB12",
"type": "bidirectional",
"description": "FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA, SPI2_SS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and UART5_RX."
},
{
"number": "52",
"name": "PB13",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX, OTG_HS_ULPI_D6, SDMMC1_D0 and UART5_TX."
},
{
"number": "53",
"name": "PB14",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and LCD_CLK."
},
{
"number": "54",
"name": "PB15",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and LCD_G7."
},
{
"number": "55",
"name": "PD8",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKIN3, USART3_TX, SPDIFRX1_IN1 and FMC_D13/FMC_DA13."
},
{
"number": "56",
"name": "PD9",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_DATIN3, USART3_RX and FMC_D14/FMC_DA14."
},
{
"number": "57",
"name": "PD10",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKOUT, DFSDM2_CKOUT, USART3_CK, FMC_D15/FMC_DA15 and LCD_B3."
},
{
"number": "58",
"name": "PD11",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS, OCTOSPIM_P1_IO0, SAI2_SD_A and FMC_A16/FMC_CLE."
},
{
"number": "59",
"name": "PD12",
"type": "bidirectional",
"description": "FT_fh2 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include LPTIM1_IN1, TIM4_CH1, LPTIM2_IN1, I2C4_SCL, USART3_RTS, OCTOSPIM_P1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE and DCMI_D12/PSSI_D12."
},
{
"number": "60",
"name": "PD13",
"type": "bidirectional",
"description": "FT_fh2 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, OCTOSPIM_P1_IO3, SAI2_SCK_A, UART9_RTS, FMC_A18 and DCMI_D13/PSSI_D13."
},
{
"number": "61",
"name": "PD14",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_DA0."
},
{
"number": "62",
"name": "PD15",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM4_CH4, UART8_RTS, UART9_TX and FMC_D1/FMC_DA1."
},
{
"number": "63",
"name": "PC6",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, I2S2_MCK, USART6_TX, FMC_NWAIT, SDMMC1_D6 and DCMI_D0/PSSI_D0."
},
{
"number": "64",
"name": "PC7",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, I2S3_MCK, USART6_RX, FMC_NE1, SWPMI_TX, SDMMC1_D7 and DCMI_D1/PSSI_D1."
},
{
"number": "65",
"name": "PC8",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT, SWPMI_RX, SDMMC1_D0 and DCMI_D2/PSSI_D2."
},
{
"number": "66",
"name": "PC9",
"type": "bidirectional",
"description": "FT_fh0 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, OCTOSPIM_P1_IO0, SWPMI_SUSPEND, SDMMC1_D1 and DCMI_D3/PSSI_D3."
},
{
"number": "67",
"name": "PA8",
"type": "bidirectional",
"description": "FT_fh0 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_HS_SOF, UART7_RX and LCD_R6."
},
{
"number": "68",
"name": "PA9",
"type": "bidirectional",
"description": "FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0/PSSI_D0 and LCD_R5; additional function OTG_HS_VBUS."
},
{
"number": "69",
"name": "PA10",
"type": "bidirectional",
"description": "FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX, OTG_HS_ID, MDIOS_MDIO, DCMI_D1/PSSI_D1 and LCD_B1."
},
{
"number": "70",
"name": "PA11",
"type": "bidirectional",
"description": "FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_SS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX and LCD_R4; additional function OTG_HS_DM."
},
{
"number": "71",
"name": "PA12",
"type": "bidirectional",
"description": "FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX and LCD_R5; additional function OTG_HS_DP."
},
{
"number": "72",
"name": "PA13",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O; function after reset is JTMS/SWDIO (SWD debug data), with EVENTOUT as alternate function."
},
{
"number": "73",
"name": "VCAP",
"type": "power_in",
"description": "Connection for the external VCORE decoupling capacitor; with the internal regulator OFF, the external VCORE voltage (1.0-1.35 V depending on VOS, Table 22) must be supplied on VCAP pins."
},
{
"number": "74",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "75",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
},
{
"number": "76",
"name": "PA14(JTCK/SWCLK)",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O; function after reset is JTCK/SWCLK (SWD clock), with EVENTOUT as alternate function."
},
{
"number": "77",
"name": "PA15(JTDI)",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O; function after reset is JTDI, with alternate functions including TIM2_CH1/TIM2_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, UART4_RTS, UART7_TX and LCD_B6."
},
{
"number": "78",
"name": "PC10",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPIM_P1_IO1, SWPMI_RX, SDMMC1_D2 and DCMI_D8/PSSI_D8."
},
{
"number": "79",
"name": "PC11",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPIM_P1_NCS, SDMMC1_D3 and DCMI_D4/PSSI_D4."
},
{
"number": "80",
"name": "PC12",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED3, TIM15_CH1, DFSDM2_CKOUT, SPI6_SCK/I2S6_CK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9/PSSI_D9."
},
{
"number": "81",
"name": "PD0",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKIN6, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_DA2 and LCD_B1."
},
{
"number": "82",
"name": "PD1",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_DATIN6, UART4_TX, FDCAN1_TX and FMC_D3/FMC_DA3."
},
{
"number": "83",
"name": "PD2",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, LCD_B7, SDMMC1_CMD, DCMI_D11/PSSI_D11 and LCD_B2."
},
{
"number": "84",
"name": "PD3",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5 and LCD_G7."
},
{
"number": "85",
"name": "PD4",
"type": "bidirectional",
"description": "FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include USART2_RTS, OCTOSPIM_P1_IO4, FMC_NOE and EVENTOUT."
},
{
"number": "86",
"name": "PD5",
"type": "bidirectional",
"description": "FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE and EVENTOUT."
},
{
"number": "87",
"name": "PD6",
"type": "bidirectional",
"description": "FT_sh3 I/O (secondary supply VDDMMC, high-speed low-voltage group); alternate functions include SAI1_D1, DFSDM1_CKIN4, SPI3_MOSI/I2S3_SDO, USART2_RX, OCTOSPIM_P1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10 and LCD_B2."
},
{
"number": "88",
"name": "PD7",
"type": "bidirectional",
"description": "FT_sh3 I/O (secondary supply VDDMMC, high-speed low-voltage group); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN0, OCTOSPIM_P1_IO7, SDMMC2_CMD and FMC_NE1."
},
{
"number": "89",
"name": "PB3(JTDO/TRACESWO)",
"type": "bidirectional",
"description": "FT_h0 I/O; function after reset is JTDO/TRACESWO, with alternate functions including TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX."
},
{
"number": "90",
"name": "PB4(NJTRST)",
"type": "bidirectional",
"description": "FT_h0 I/O; function after reset is NJTRST, with alternate functions including TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI, SPI2_SS/I2S2_WS, SDMMC2_D3 and UART7_TX."
},
{
"number": "91",
"name": "PB5",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group); alternate functions include TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, I2C4_SMBA, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1, DCMI_D10/PSSI_D10 and UART5_RX."
},
{
"number": "92",
"name": "PB6",
"type": "bidirectional",
"description": "FT_f I/O (I2C FM+ option); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPIM_P1_NCS, FMC_SDNE1, DCMI_D5/PSSI_D5 and UART5_TX."
},
{
"number": "93",
"name": "PB7",
"type": "bidirectional",
"description": "FT_fa I/O (I2C FM+ and analog option); alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, FMC_NL and DCMI_VSYNC/PSSI_RDY; additional function PVD_IN."
},
{
"number": "94",
"name": "BOOT0",
"type": "input",
"description": "Dedicated BOOT0 input pin; input voltage range is 0 to 9 V (Table 22)."
},
{
"number": "95",
"name": "PB8",
"type": "bidirectional",
"description": "FT_fsh3 I/O (I2C FM+ option, secondary supply VDDMMC); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX, SDMMC2_D4, SDMMC1_D4 and DCMI_D6/PSSI_D6."
},
{
"number": "96",
"name": "PB9",
"type": "bidirectional",
"description": "FT_fsh3 I/O (I2C FM+ option, secondary supply VDDMMC); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_SS/I2S2_WS, I2C4_SDA, UART4_TX, FDCAN1_TX, SDMMC2_D5, SDMMC1_D5 and DCMI_D7/PSSI_D7."
},
{
"number": "97",
"name": "PE0",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM1_ETR, TIM4_ETR, LPTIM2_ETR, UART8_RX, SAI2_MCK_A, FMC_NBL0, DCMI_D2/PSSI_D2 and LCD_R0."
},
{
"number": "98",
"name": "PE1",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3/PSSI_D3 and LCD_R6."
},
{
"number": "99",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "100",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package variant: the MPN STM32H7B3VIT6 has no 'Q' suffix. The datasheet states that the SMPS devices; Pin 8 is labelled 'PC14-OSC32_ON' in Figure 6 but 'PC14-OSC32_IN' in Table 7. The Table 7 name was u; PC2 is not bonded on the LQFP100 without SMPS. Pin 17 is PC2_C (analog pad), per Figure 6 and Table "
],
"pages_sent": 96,
"cost_usd": 0.5736,
"at": "2026-11-13T20:19:40"
},
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/stm32h7b3vi.pdf",
"pages": 238,
"sha256": "79cfcb3fc210a55d",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 100,
"described": 100,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "stm32h7b3vit6.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16.0,
16.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "stm32h7b3vit6-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16.0,
16.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "8cb9855447996694de65e9a4d75b94b0a604e544b1d4a266535704d77509cc91",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "LQFP100 (package code 1L)",
"source_page": 190,
"D": {
"nom_mm": 14.0,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 14.0,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 16.0,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.5,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "stm32h7b3vit6.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}