main
History Download
Ray Publish 0.1.0 21a8b99

STM32H7B3VIT6

STMicroelectronics · ST Microelectronics · LQFP-100(14x14)

STM32H7B3VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V-tolerant FT_h2 I/O (high-speed low-voltage group, mainly FMC/OCTOSPI); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, OCTOSPIM_P1_IO2, USART10_RX and FMC_A23.
2 PE3 bidirectional 5 V-tolerant FT_h2 I/O; alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX and FMC_A19.
3 PE4 bidirectional 5 V-tolerant FT_h2 I/O; alternate functions include TRACED1, SAI1_D2, DFSDM1_DATIN3, TIM15_CH1N, SPI4_SS, FMC_A20, DCMI_D4/PSSI_D4 and LCD_B0.
4 PE5 bidirectional 5 V-tolerant FT_h2 I/O; alternate functions include TRACED2, SAI1_CK2, DFSDM1_CKIN3, TIM15_CH1, SPI4_MISO, FMC_A21, DCMI_D6/PSSI_D6 and LCD_G0.
5 PE6 bidirectional 5 V-tolerant FT_h2 I/O; alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI2_MCK_B, FMC_A22, DCMI_D7/PSSI_D7 and LCD_G1.
6 VBAT power_in Backup domain supply; backup operating voltage 1.2 V to 3.6 V (Table 22).
7 PC13 bidirectional 5 V-tolerant FT I/O with tamper and RTC additional functions TAMP_IN1/TAMP_OUT2/TAMP_OUT3, RTC_OUT1/RTC_TS and WKUP3.
8 PC14-OSC32_IN bidirectional 5 V-tolerant FT I/O shared with the low-speed external oscillator input OSC32_IN (LSE).
9 PC15-OSC32_OUT bidirectional 5 V-tolerant FT I/O shared with the low-speed external oscillator output OSC32_OUT (LSE).
10 VSS power_in Ground pin; all VSS and VSSA pins must always be connected to the external supply within the permitted range (Table 19 note).
11 VDD power_in Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected.
12 PH0-OSC_IN bidirectional 5 V-tolerant FT I/O shared with the high-speed external oscillator input OSC_IN (HSE, 4-50 MHz).
13 PH1-OSC_OUT bidirectional 5 V-tolerant FT I/O shared with the high-speed external oscillator output OSC_OUT (HSE, 4-50 MHz).
14 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor (RST structure, Table 6).
15 PC0 bidirectional FT_a I/O with analog option (supplied by VDDA); alternate functions include DFSDM1_CKIN0, SAI2_FS_B, FMC_A25, OTG_HS_ULPI_STP and LCD_G2; additional function ADC12_INP10.
16 PC1 bidirectional FT_ah0 I/O with analog option (supplied by VDDA); alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO, SDMMC2_CK and OCTOSPIM_P1_IO4; additional functions ADC12_INP11/ADC12_INN10, TAMP_IN3 and WKUP6.
17 PC2_C passive Analog pad Pxy_C (TT_a) separate from PC2 on this package; the analog switch to the Pxy pad is configured through SYSCFG (Table 7 footnotes 3-4); additional functions ADC2_INP0 and ADC2_INN1.
18 PC3_C passive Analog pad Pxy_C (TT_a) separate from PC3 on this package; the analog switch is configured through SYSCFG (Table 7 footnotes 3-4); additional function ADC2_INP1.
19 VSSA power_in Analog ground pin; must always be connected to the external supply within the permitted range (Table 19 note).
20 VREF+ power_in Positive voltage reference input; included in the external main supply voltage ratings, -0.3 V to 4.0 V (Table 19).
21 VDDA power_in Analog supply voltage, 1.62 V to 3.6 V when the ADC or COMP is used (Table 22).
22 PA0 bidirectional FT_a I/O with analog option; alternate functions include TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, SPI6_SS/I2S6_WS, USART2_CTS/USART2_NSS, UART4_TX and SDMMC2_CMD; additional functions ADC1_INP16 and WKUP1.
23 PA1 bidirectional FT_ah1 I/O with analog option; alternate functions include TIM2_CH2, TIM5_CH2, LPTIM3_OUT, USART2_RTS, UART4_RX, OCTOSPIM_P1_IO3 and LCD_R2; additional functions ADC1_INP17 and ADC1_INN16.
24 PA2 bidirectional FT_a I/O with analog option; alternate functions include TIM2_CH3, TIM5_CH3, TIM15_CH1, USART2_TX, SAI2_SCK_B, MDIOS_MDIO and LCD_R1; additional functions ADC1_INP14 and WKUP2.
25 PA3 bidirectional FT_ah1 I/O with analog option; alternate functions include TIM2_CH4, TIM5_CH4, OCTOSPIM_P1_CLK, TIM15_CH2, I2S6_MCK, USART2_RX and OTG_HS_ULPI_D0; additional function ADC1_INP15.
26 VSS power_in Ground pin; must always be connected to the external supply within the permitted range (Table 19 note).
27 VDD power_in Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected.
28 PA4 bidirectional TT_a I/O (3.3 V tolerant) with analog option; alternate functions include TIM5_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, USART2_CK, DCMI_HSYNC/PSSI_DE and LCD_VSYNC; additional functions ADC1_INP18 and DAC1_OUT1.
29 PA5 bidirectional TT_ah0 I/O (3.3 V tolerant) with analog option; alternate functions include PWR_NDSTOP2, TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, OTG_HS_ULPI_CK, PSSI_D14 and LCD_R4; additional functions ADC1_INP19, ADC1_INN18 and DAC1_OUT2.
30 PA6 bidirectional TT_ah1 I/O (3.3 V tolerant) with analog option; alternate functions include TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO/I2S1_SDI, TIM13_CH1, MDIOS_MDC and DCMI_PIXCLK/PSSI_PDCK; additional functions ADC12_INP3 and DAC2_OUT1.
31 PA7 bidirectional FT_ah1 I/O with analog option; alternate functions include TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SDO, TIM14_CH1, OCTOSPIM_P1_IO2, FMC_SDNWE and LCD_VSYNC; additional functions ADC12_INP7 and ADC12_INN3.
32 PC4 bidirectional FT_a I/O with analog option; alternate functions include DFSDM1_CKIN2, I2S1_MCK, SPDIFRX1_IN2, FMC_SDNE0 and LCD_R7; additional functions ADC12_INP4 and COMP1_INM.
33 PC5 bidirectional FT_ah1 I/O with analog option; alternate functions include SAI1_D3, DFSDM1_DATIN2, PSSI_D15, SPDIFRX1_IN3, OCTOSPIM_P1_DQS, FMC_SDCKE0, COMP1_OUT and LCD_DE; additional functions ADC12_INP8 and ADC12_INN4.
34 PB0 bidirectional FT_ah0 I/O with analog option; alternate functions include TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, OCTOSPIM_P1_IO1 and LCD_G1; additional functions ADC12_INP9, ADC12_INN5, OPAMP1_VINP and COMP1_INP.
35 PB1 bidirectional FT_ah0 I/O with analog option; alternate functions include TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, OCTOSPIM_P1_IO0 and LCD_G0; additional functions ADC12_INP5 and COMP1_INM.
36 PB2 bidirectional FT_ah1 I/O with analog option; alternate functions include RTC_OUT2, SAI1_D1, DFSDM1_CKIN1, SAI1_SD_A, SPI3_MOSI/I2S3_SDO, OCTOSPIM_P1_CLK and OCTOSPIM_P1_DQS; additional function COMP1_INP.
37 PE7 bidirectional FT_ah2 I/O with analog option; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, OCTOSPIM_P1_IO4, FMC_D4/FMC_DA4 and EVENTOUT.
38 PE8 bidirectional FT_ah2 I/O with analog option; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, OCTOSPIM_P1_IO5, FMC_D5/FMC_DA5 and COMP2_OUT.
39 PE9 bidirectional FT_ah2 I/O with analog option; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, OCTOSPIM_P1_IO6 and FMC_D6/FMC_DA6.
40 PE10 bidirectional FT_ah2 I/O with analog option; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, OCTOSPIM_P1_IO7, FMC_D7/FMC_DA7 and COMP2_INM.
41 PE11 bidirectional FT_ah2 I/O with analog option; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_SS, SAI2_SD_B, OCTOSPIM_P1_NCS, FMC_D8/FMC_DA8, LCD_G3 and COMP2_INP.
42 PE12 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9/FMC_DA9, COMP1_OUT and LCD_B4.
43 PE13 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10/FMC_DA10, COMP2_OUT and LCD_DE.
44 PE14 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11/FMC_DA11 and LCD_CLK.
45 PE15 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_BKIN, USART10_CK, FMC_D12/FMC_DA12, TIM1_BKIN_COMP12 and LCD_R7.
46 PB10 bidirectional FT_f I/O (I2C FM+ option); alternate functions include TIM2_CH3, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, OCTOSPIM_P1_NCS, OTG_HS_ULPI_D3 and LCD_G4.
47 PB11 bidirectional FT_f I/O (I2C FM+ option); alternate functions include TIM2_CH4, LPTIM2_ETR, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4 and LCD_G5.
48 VCAP power_in Connection for the external VCORE decoupling capacitor; with the internal regulator OFF, the external VCORE voltage (1.0-1.35 V depending on VOS, Table 22) must be supplied on VCAP pins.
49 VSS power_in Ground pin; must always be connected to the external supply within the permitted range (Table 19 note).
50 VDD power_in Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected.
51 PB12 bidirectional FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA, SPI2_SS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and UART5_RX.
52 PB13 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX, OTG_HS_ULPI_D6, SDMMC1_D0 and UART5_TX.
53 PB14 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and LCD_CLK.
54 PB15 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and LCD_G7.
55 PD8 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKIN3, USART3_TX, SPDIFRX1_IN1 and FMC_D13/FMC_DA13.
56 PD9 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_DATIN3, USART3_RX and FMC_D14/FMC_DA14.
57 PD10 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKOUT, DFSDM2_CKOUT, USART3_CK, FMC_D15/FMC_DA15 and LCD_B3.
58 PD11 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS, OCTOSPIM_P1_IO0, SAI2_SD_A and FMC_A16/FMC_CLE.
59 PD12 bidirectional FT_fh2 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include LPTIM1_IN1, TIM4_CH1, LPTIM2_IN1, I2C4_SCL, USART3_RTS, OCTOSPIM_P1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE and DCMI_D12/PSSI_D12.
60 PD13 bidirectional FT_fh2 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, OCTOSPIM_P1_IO3, SAI2_SCK_A, UART9_RTS, FMC_A18 and DCMI_D13/PSSI_D13.
61 PD14 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_DA0.
62 PD15 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM4_CH4, UART8_RTS, UART9_TX and FMC_D1/FMC_DA1.
63 PC6 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, I2S2_MCK, USART6_TX, FMC_NWAIT, SDMMC1_D6 and DCMI_D0/PSSI_D0.
64 PC7 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, I2S3_MCK, USART6_RX, FMC_NE1, SWPMI_TX, SDMMC1_D7 and DCMI_D1/PSSI_D1.
65 PC8 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT, SWPMI_RX, SDMMC1_D0 and DCMI_D2/PSSI_D2.
66 PC9 bidirectional FT_fh0 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, OCTOSPIM_P1_IO0, SWPMI_SUSPEND, SDMMC1_D1 and DCMI_D3/PSSI_D3.
67 PA8 bidirectional FT_fh0 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_HS_SOF, UART7_RX and LCD_R6.
68 PA9 bidirectional FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0/PSSI_D0 and LCD_R5; additional function OTG_HS_VBUS.
69 PA10 bidirectional FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX, OTG_HS_ID, MDIOS_MDIO, DCMI_D1/PSSI_D1 and LCD_B1.
70 PA11 bidirectional FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_SS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX and LCD_R4; additional function OTG_HS_DM.
71 PA12 bidirectional FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX and LCD_R5; additional function OTG_HS_DP.
72 PA13 bidirectional 5 V-tolerant FT I/O; function after reset is JTMS/SWDIO (SWD debug data), with EVENTOUT as alternate function.
73 VCAP power_in Connection for the external VCORE decoupling capacitor; with the internal regulator OFF, the external VCORE voltage (1.0-1.35 V depending on VOS, Table 22) must be supplied on VCAP pins.
74 VSS power_in Ground pin; must always be connected to the external supply within the permitted range (Table 19 note).
75 VDD power_in Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected.
76 PA14(JTCK/SWCLK) bidirectional 5 V-tolerant FT I/O; function after reset is JTCK/SWCLK (SWD clock), with EVENTOUT as alternate function.
77 PA15(JTDI) bidirectional 5 V-tolerant FT I/O; function after reset is JTDI, with alternate functions including TIM2_CH1/TIM2_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, UART4_RTS, UART7_TX and LCD_B6.
78 PC10 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPIM_P1_IO1, SWPMI_RX, SDMMC1_D2 and DCMI_D8/PSSI_D8.
79 PC11 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPIM_P1_NCS, SDMMC1_D3 and DCMI_D4/PSSI_D4.
80 PC12 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED3, TIM15_CH1, DFSDM2_CKOUT, SPI6_SCK/I2S6_CK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9/PSSI_D9.
81 PD0 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKIN6, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_DA2 and LCD_B1.
82 PD1 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_DATIN6, UART4_TX, FDCAN1_TX and FMC_D3/FMC_DA3.
83 PD2 bidirectional FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, LCD_B7, SDMMC1_CMD, DCMI_D11/PSSI_D11 and LCD_B2.
84 PD3 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5 and LCD_G7.
85 PD4 bidirectional FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include USART2_RTS, OCTOSPIM_P1_IO4, FMC_NOE and EVENTOUT.
86 PD5 bidirectional FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE and EVENTOUT.
87 PD6 bidirectional FT_sh3 I/O (secondary supply VDDMMC, high-speed low-voltage group); alternate functions include SAI1_D1, DFSDM1_CKIN4, SPI3_MOSI/I2S3_SDO, USART2_RX, OCTOSPIM_P1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10 and LCD_B2.
88 PD7 bidirectional FT_sh3 I/O (secondary supply VDDMMC, high-speed low-voltage group); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN0, OCTOSPIM_P1_IO7, SDMMC2_CMD and FMC_NE1.
89 PB3(JTDO/TRACESWO) bidirectional FT_h0 I/O; function after reset is JTDO/TRACESWO, with alternate functions including TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX.
90 PB4(NJTRST) bidirectional FT_h0 I/O; function after reset is NJTRST, with alternate functions including TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI, SPI2_SS/I2S2_WS, SDMMC2_D3 and UART7_TX.
91 PB5 bidirectional FT_h0 I/O (high-speed low-voltage group); alternate functions include TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, I2C4_SMBA, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1, DCMI_D10/PSSI_D10 and UART5_RX.
92 PB6 bidirectional FT_f I/O (I2C FM+ option); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPIM_P1_NCS, FMC_SDNE1, DCMI_D5/PSSI_D5 and UART5_TX.
93 PB7 bidirectional FT_fa I/O (I2C FM+ and analog option); alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, FMC_NL and DCMI_VSYNC/PSSI_RDY; additional function PVD_IN.
94 BOOT0 input Dedicated BOOT0 input pin; input voltage range is 0 to 9 V (Table 22).
95 PB8 bidirectional FT_fsh3 I/O (I2C FM+ option, secondary supply VDDMMC); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX, SDMMC2_D4, SDMMC1_D4 and DCMI_D6/PSSI_D6.
96 PB9 bidirectional FT_fsh3 I/O (I2C FM+ option, secondary supply VDDMMC); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_SS/I2S2_WS, I2C4_SDA, UART4_TX, FDCAN1_TX, SDMMC2_D5, SDMMC1_D5 and DCMI_D7/PSSI_D7.
97 PE0 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM1_ETR, TIM4_ETR, LPTIM2_ETR, UART8_RX, SAI2_MCK_A, FMC_NBL0, DCMI_D2/PSSI_D2 and LCD_R0.
98 PE1 bidirectional FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3/PSSI_D3 and LCD_R6.
99 VSS power_in Ground pin; must always be connected to the external supply within the permitted range (Table 19 note).
100 VDD power_in Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDD, VDDLDO, VDDSMPS, VDDA, VDD33USB, VDDMMC, VBAT, VREF+) VDDX − VSS -0.3 4 V 81
Input voltage on FT_xxx pins VIN -0.3 V 81
Input voltage on TT_xx pins VIN -0.3 4 V 81
Input voltage on BOOT0 pin VIN 0 9 V 81
Input voltage on any other pins VIN -0.3 4 V 81
Variations between different VDDX power pins of the same domain /ΔVDDX/ 50 mV 81
Variations between all the different ground pins /VSSx−VSS/ 50 mV 82
Total current into sum of all VDD power lines (source) ΣIVDD 620 mA 82
Total current out of sum of all VSS ground lines (sink) ΣIVSS 620 mA 82
Maximum current into each VDD power pin (source) IVDD 100 mA 82
Maximum current out of each VSS ground pin (sink) IVSS 100 mA 82
Output current sunk or sourced by any I/O and control pin IIO 20 mA 82
Output current sunk or sourced by Pxy_C pin IIO 1 mA Pxy_C pin 82
Total output current sunk by sum of all I/Os and control pins ΣI(PIN) 140 mA Sunk 82
Total output current sourced by sum of all I/Os and control pins ΣI(PIN) 140 mA Sourced 82
Injected current on FT_xxx, TT_xx, RST and B pins except PA4, PA5 IINJ(PIN) -5 0 mA 82
Injected current on PA4, PA5 IINJ(PIN) 0 0 mA 82
Total injected current (sum of all I/Os and control pins) ΣIINJ(PIN) -25 25 mA 82
Storage temperature range TSTG -65 150 °C 82
Maximum junction temperature TJmax 130 °C Limited to 105 °C in VOS0 voltage range 82
ESD voltage (human body model), packages without SMPS VESD(HBM) 2000 V TA = +25 °C, ANSI/ESDA/JEDEC JS-001; class 2 116
ESD voltage (charge device model), all LQFP packages and WLCSP VESD(CDM) 250 V TA = +25 °C, ANSI/ESDA/JEDEC JS-002; class C1 116
Standard operating voltage VDD 1.62 3.6 V 83
Supply voltage for the internal regulator VDDLDO 1.62 3.6 V VDDLDO ≤ VDD 83
Standard operating voltage for independent MMC I/Os VDDMMC 1.62 3.6 V Independent MMC I/Os used 83
Standard operating voltage, USB domain VDD33USB 3 3.6 V USB used 83
Standard operating voltage, USB domain VDD33USB 0 3.6 V USB not used 83
Analog operating voltage VDDA 1.62 3.6 V ADC or COMP used 83
Analog operating voltage VDDA 1.8 V DAC used 83
Analog operating voltage VDDA 2 V OPAMP used 83
Backup operating voltage VBAT 1.2 3.6 V 83
Internal regulator ON (LDO or SMPS) core voltage VCORE 0.95 1 1.05 V VOS3 (max frequency 88 MHz) 83
Internal regulator ON (LDO or SMPS) core voltage VCORE 1.05 1.1 1.15 V VOS2 (max frequency 160 MHz) 83
Internal regulator ON (LDO or SMPS) core voltage VCORE 1.15 1.2 1.25 V VOS1 (max frequency 225 MHz) 83
Internal regulator ON (LDO or SMPS) core voltage VCORE 1.25 1.3 1.35 V VOS0 (max frequency 280 MHz) 83
Regulator OFF core voltage (external VCORE on VCAP pins) VCORE 1.27 1.3 1.33 V VOS0 (max frequency 280 MHz) 84
Ambient temperature for the suffix 6 version TA -40 85 °C Maximum power dissipation 84
Ambient temperature for the suffix 6 version TA -40 105 °C Low-power dissipation 84
Junction temperature range TJ -40 105 °C VOS0 84
Junction temperature range TJ -40 130 °C VOS3, VOS2, VOS1 84
CPU clock frequency fCPU 280 MHz VOS0 84
Minimum standard operating voltage for max frequency configuration VDD 1.71 V VOS0, LDO/SMPS, max frequency 280 MHz 85
Reset temporization after POR released tRSTTEMPO 377 550 µs 91
Power-on/power-down reset threshold VPOR/PDR 1.62 1.67 1.71 V Rising edge 91
Power-on/power-down reset threshold VPOR/PDR 1.58 1.62 1.68 V Falling edge 91
Internal reference voltages VREFINT 1.18 1.216 1.255 V −40 °C < TJ < 130 °C 92
Average voltage coefficient VDDcoeff 10 1370 ppm/V 3.0 V < VDD < 3.6 V 92
Supply current in Run mode, all peripherals disabled IDD 128 mA Run, code from ITCM, fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C 95
Supply current in Run mode, all peripherals enabled IDD 196 mA Run, code from ITCM, fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C 95
Supply current in Sleep mode, all peripherals disabled IDD(Sleep) 72 mA fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C 98
Supply current in Standby mode IDD(Standby) 22 µA IWDG OFF, backup SRAM OFF, RTC & LSE OFF, max at 3.6 V, TJ = 105 °C 99
Oscillator frequency (HSE) F 4 50 MHz 108
HSI48 frequency fHSI48 47.5 48 48.5 MHz VDD = 3.3 V, TJ = 30 °C 110
HSI frequency fHSI 63.7 64 64.3 MHz VDD = 3.3 V, TJ = 30 °C 111
CSI frequency fCSI 3.96 4 4.04 MHz VDD = 3.3 V, TJ = 30 °C 111
Wakeup time from Standby mode tWUSTDBY 257 330 µs 105

CAD (KiCad official)

  • Symbol: STM32H7B3VIT6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32h7b3vit6-etched.step / stm32h7b3vit6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32h7b3vit6.step / stm32h7b3vit6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (238 pp, sha256 79cfcb3fc210a55d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF