component
STM32H7B3VIT6
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
867b923
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501
{
"schema_version": 1,
"type": "component",
"slug": "stm32h7b3vit6",
"title": "STM32H7B3VIT6",
"brief": "STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"embedded processors & controllers",
"stm32h7b3vit6",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "STM32H7B3VIT6",
"manufacturer": "STMicroelectronics",
"package": "LQFP-100(14x14)",
"pin_count": 100,
"category": "Embedded Processors & Controllers",
"subcategory": "ST Microelectronics",
"datasheet": "https://www.st.com/resource/en/datasheet/stm32h7b3vi.pdf",
"parts": {
"symbol": "stm32h7b3vit6.kicad_sym",
"footprint": "stm32h7b3vit6.kicad_mod",
"model_3d": "stm32h7b3vit6-hero.glb",
"model_3d_plain": "stm32h7b3vit6.glb",
"model_3d_step": "stm32h7b3vit6-etched.step",
"model_3d_step_plain": "stm32h7b3vit6.step",
"lbr": "stm32h7b3vit6.lbr"
},
"distributor_links": {
"lcsc": "C730232",
"digikey": "497-STM32H7B3VIT6-ND",
"mouser": "511-STM32H7B3VIT6"
},
"distributor_check": {
"checked_at": "2026-11-13T20:19:56Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-STM32H7B3VIT6-ND",
"status": "found"
},
"mouser": {
"pn": "511-STM32H7B3VIT6",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "PE2",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O (high-speed low-voltage group, mainly FMC/OCTOSPI); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, OCTOSPIM_P1_IO2, USART10_RX and FMC_A23."
},
{
"number": "2",
"name": "PE3",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O; alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX and FMC_A19."
},
{
"number": "3",
"name": "PE4",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O; alternate functions include TRACED1, SAI1_D2, DFSDM1_DATIN3, TIM15_CH1N, SPI4_SS, FMC_A20, DCMI_D4/PSSI_D4 and LCD_B0."
},
{
"number": "4",
"name": "PE5",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O; alternate functions include TRACED2, SAI1_CK2, DFSDM1_CKIN3, TIM15_CH1, SPI4_MISO, FMC_A21, DCMI_D6/PSSI_D6 and LCD_G0."
},
{
"number": "5",
"name": "PE6",
"type": "bidirectional",
"description": "5 V-tolerant FT_h2 I/O; alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI2_MCK_B, FMC_A22, DCMI_D7/PSSI_D7 and LCD_G1."
},
{
"number": "6",
"name": "VBAT",
"type": "power_in",
"description": "Backup domain supply; backup operating voltage 1.2 V to 3.6 V (Table 22)."
},
{
"number": "7",
"name": "PC13",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O with tamper and RTC additional functions TAMP_IN1/TAMP_OUT2/TAMP_OUT3, RTC_OUT1/RTC_TS and WKUP3."
},
{
"number": "8",
"name": "PC14-OSC32_IN",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O shared with the low-speed external oscillator input OSC32_IN (LSE)."
},
{
"number": "9",
"name": "PC15-OSC32_OUT",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O shared with the low-speed external oscillator output OSC32_OUT (LSE)."
},
{
"number": "10",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; all VSS and VSSA pins must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "11",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
},
{
"number": "12",
"name": "PH0-OSC_IN",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O shared with the high-speed external oscillator input OSC_IN (HSE, 4-50 MHz)."
},
{
"number": "13",
"name": "PH1-OSC_OUT",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O shared with the high-speed external oscillator output OSC_OUT (HSE, 4-50 MHz)."
},
{
"number": "14",
"name": "NRST",
"type": "bidirectional",
"description": "Bidirectional reset pin with embedded weak pull-up resistor (RST structure, Table 6)."
},
{
"number": "15",
"name": "PC0",
"type": "bidirectional",
"description": "FT_a I/O with analog option (supplied by VDDA); alternate functions include DFSDM1_CKIN0, SAI2_FS_B, FMC_A25, OTG_HS_ULPI_STP and LCD_G2; additional function ADC12_INP10."
},
{
"number": "16",
"name": "PC1",
"type": "bidirectional",
"description": "FT_ah0 I/O with analog option (supplied by VDDA); alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO, SDMMC2_CK and OCTOSPIM_P1_IO4; additional functions ADC12_INP11/ADC12_INN10, TAMP_IN3 and WKUP6."
},
{
"number": "17",
"name": "PC2_C",
"type": "passive",
"description": "Analog pad Pxy_C (TT_a) separate from PC2 on this package; the analog switch to the Pxy pad is configured through SYSCFG (Table 7 footnotes 3-4); additional functions ADC2_INP0 and ADC2_INN1."
},
{
"number": "18",
"name": "PC3_C",
"type": "passive",
"description": "Analog pad Pxy_C (TT_a) separate from PC3 on this package; the analog switch is configured through SYSCFG (Table 7 footnotes 3-4); additional function ADC2_INP1."
},
{
"number": "19",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "20",
"name": "VREF+",
"type": "power_in",
"description": "Positive voltage reference input; included in the external main supply voltage ratings, -0.3 V to 4.0 V (Table 19)."
},
{
"number": "21",
"name": "VDDA",
"type": "power_in",
"description": "Analog supply voltage, 1.62 V to 3.6 V when the ADC or COMP is used (Table 22)."
},
{
"number": "22",
"name": "PA0",
"type": "bidirectional",
"description": "FT_a I/O with analog option; alternate functions include TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, SPI6_SS/I2S6_WS, USART2_CTS/USART2_NSS, UART4_TX and SDMMC2_CMD; additional functions ADC1_INP16 and WKUP1."
},
{
"number": "23",
"name": "PA1",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include TIM2_CH2, TIM5_CH2, LPTIM3_OUT, USART2_RTS, UART4_RX, OCTOSPIM_P1_IO3 and LCD_R2; additional functions ADC1_INP17 and ADC1_INN16."
},
{
"number": "24",
"name": "PA2",
"type": "bidirectional",
"description": "FT_a I/O with analog option; alternate functions include TIM2_CH3, TIM5_CH3, TIM15_CH1, USART2_TX, SAI2_SCK_B, MDIOS_MDIO and LCD_R1; additional functions ADC1_INP14 and WKUP2."
},
{
"number": "25",
"name": "PA3",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include TIM2_CH4, TIM5_CH4, OCTOSPIM_P1_CLK, TIM15_CH2, I2S6_MCK, USART2_RX and OTG_HS_ULPI_D0; additional function ADC1_INP15."
},
{
"number": "26",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "27",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
},
{
"number": "28",
"name": "PA4",
"type": "bidirectional",
"description": "TT_a I/O (3.3 V tolerant) with analog option; alternate functions include TIM5_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, USART2_CK, DCMI_HSYNC/PSSI_DE and LCD_VSYNC; additional functions ADC1_INP18 and DAC1_OUT1."
},
{
"number": "29",
"name": "PA5",
"type": "bidirectional",
"description": "TT_ah0 I/O (3.3 V tolerant) with analog option; alternate functions include PWR_NDSTOP2, TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, OTG_HS_ULPI_CK, PSSI_D14 and LCD_R4; additional functions ADC1_INP19, ADC1_INN18 and DAC1_OUT2."
},
{
"number": "30",
"name": "PA6",
"type": "bidirectional",
"description": "TT_ah1 I/O (3.3 V tolerant) with analog option; alternate functions include TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO/I2S1_SDI, TIM13_CH1, MDIOS_MDC and DCMI_PIXCLK/PSSI_PDCK; additional functions ADC12_INP3 and DAC2_OUT1."
},
{
"number": "31",
"name": "PA7",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SDO, TIM14_CH1, OCTOSPIM_P1_IO2, FMC_SDNWE and LCD_VSYNC; additional functions ADC12_INP7 and ADC12_INN3."
},
{
"number": "32",
"name": "PC4",
"type": "bidirectional",
"description": "FT_a I/O with analog option; alternate functions include DFSDM1_CKIN2, I2S1_MCK, SPDIFRX1_IN2, FMC_SDNE0 and LCD_R7; additional functions ADC12_INP4 and COMP1_INM."
},
{
"number": "33",
"name": "PC5",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include SAI1_D3, DFSDM1_DATIN2, PSSI_D15, SPDIFRX1_IN3, OCTOSPIM_P1_DQS, FMC_SDCKE0, COMP1_OUT and LCD_DE; additional functions ADC12_INP8 and ADC12_INN4."
},
{
"number": "34",
"name": "PB0",
"type": "bidirectional",
"description": "FT_ah0 I/O with analog option; alternate functions include TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, OCTOSPIM_P1_IO1 and LCD_G1; additional functions ADC12_INP9, ADC12_INN5, OPAMP1_VINP and COMP1_INP."
},
{
"number": "35",
"name": "PB1",
"type": "bidirectional",
"description": "FT_ah0 I/O with analog option; alternate functions include TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, OCTOSPIM_P1_IO0 and LCD_G0; additional functions ADC12_INP5 and COMP1_INM."
},
{
"number": "36",
"name": "PB2",
"type": "bidirectional",
"description": "FT_ah1 I/O with analog option; alternate functions include RTC_OUT2, SAI1_D1, DFSDM1_CKIN1, SAI1_SD_A, SPI3_MOSI/I2S3_SDO, OCTOSPIM_P1_CLK and OCTOSPIM_P1_DQS; additional function COMP1_INP."
},
{
"number": "37",
"name": "PE7",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, OCTOSPIM_P1_IO4, FMC_D4/FMC_DA4 and EVENTOUT."
},
{
"number": "38",
"name": "PE8",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, OCTOSPIM_P1_IO5, FMC_D5/FMC_DA5 and COMP2_OUT."
},
{
"number": "39",
"name": "PE9",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, OCTOSPIM_P1_IO6 and FMC_D6/FMC_DA6."
},
{
"number": "40",
"name": "PE10",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, OCTOSPIM_P1_IO7, FMC_D7/FMC_DA7 and COMP2_INM."
},
{
"number": "41",
"name": "PE11",
"type": "bidirectional",
"description": "FT_ah2 I/O with analog option; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_SS, SAI2_SD_B, OCTOSPIM_P1_NCS, FMC_D8/FMC_DA8, LCD_G3 and COMP2_INP."
},
{
"number": "42",
"name": "PE12",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9/FMC_DA9, COMP1_OUT and LCD_B4."
},
{
"number": "43",
"name": "PE13",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10/FMC_DA10, COMP2_OUT and LCD_DE."
},
{
"number": "44",
"name": "PE14",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11/FMC_DA11 and LCD_CLK."
},
{
"number": "45",
"name": "PE15",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM1_BKIN, USART10_CK, FMC_D12/FMC_DA12, TIM1_BKIN_COMP12 and LCD_R7."
},
{
"number": "46",
"name": "PB10",
"type": "bidirectional",
"description": "FT_f I/O (I2C FM+ option); alternate functions include TIM2_CH3, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, OCTOSPIM_P1_NCS, OTG_HS_ULPI_D3 and LCD_G4."
},
{
"number": "47",
"name": "PB11",
"type": "bidirectional",
"description": "FT_f I/O (I2C FM+ option); alternate functions include TIM2_CH4, LPTIM2_ETR, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4 and LCD_G5."
},
{
"number": "48",
"name": "VCAP",
"type": "power_in",
"description": "Connection for the external VCORE decoupling capacitor; with the internal regulator OFF, the external VCORE voltage (1.0-1.35 V depending on VOS, Table 22) must be supplied on VCAP pins."
},
{
"number": "49",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "50",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
},
{
"number": "51",
"name": "PB12",
"type": "bidirectional",
"description": "FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA, SPI2_SS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and UART5_RX."
},
{
"number": "52",
"name": "PB13",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX, OTG_HS_ULPI_D6, SDMMC1_D0 and UART5_TX."
},
{
"number": "53",
"name": "PB14",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and LCD_CLK."
},
{
"number": "54",
"name": "PB15",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and LCD_G7."
},
{
"number": "55",
"name": "PD8",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKIN3, USART3_TX, SPDIFRX1_IN1 and FMC_D13/FMC_DA13."
},
{
"number": "56",
"name": "PD9",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_DATIN3, USART3_RX and FMC_D14/FMC_DA14."
},
{
"number": "57",
"name": "PD10",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKOUT, DFSDM2_CKOUT, USART3_CK, FMC_D15/FMC_DA15 and LCD_B3."
},
{
"number": "58",
"name": "PD11",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS, OCTOSPIM_P1_IO0, SAI2_SD_A and FMC_A16/FMC_CLE."
},
{
"number": "59",
"name": "PD12",
"type": "bidirectional",
"description": "FT_fh2 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include LPTIM1_IN1, TIM4_CH1, LPTIM2_IN1, I2C4_SCL, USART3_RTS, OCTOSPIM_P1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE and DCMI_D12/PSSI_D12."
},
{
"number": "60",
"name": "PD13",
"type": "bidirectional",
"description": "FT_fh2 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, OCTOSPIM_P1_IO3, SAI2_SCK_A, UART9_RTS, FMC_A18 and DCMI_D13/PSSI_D13."
},
{
"number": "61",
"name": "PD14",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_DA0."
},
{
"number": "62",
"name": "PD15",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include TIM4_CH4, UART8_RTS, UART9_TX and FMC_D1/FMC_DA1."
},
{
"number": "63",
"name": "PC6",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, I2S2_MCK, USART6_TX, FMC_NWAIT, SDMMC1_D6 and DCMI_D0/PSSI_D0."
},
{
"number": "64",
"name": "PC7",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, I2S3_MCK, USART6_RX, FMC_NE1, SWPMI_TX, SDMMC1_D7 and DCMI_D1/PSSI_D1."
},
{
"number": "65",
"name": "PC8",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT, SWPMI_RX, SDMMC1_D0 and DCMI_D2/PSSI_D2."
},
{
"number": "66",
"name": "PC9",
"type": "bidirectional",
"description": "FT_fh0 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, OCTOSPIM_P1_IO0, SWPMI_SUSPEND, SDMMC1_D1 and DCMI_D3/PSSI_D3."
},
{
"number": "67",
"name": "PA8",
"type": "bidirectional",
"description": "FT_fh0 I/O (I2C FM+ option, high-speed low-voltage group); alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_HS_SOF, UART7_RX and LCD_R6."
},
{
"number": "68",
"name": "PA9",
"type": "bidirectional",
"description": "FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0/PSSI_D0 and LCD_R5; additional function OTG_HS_VBUS."
},
{
"number": "69",
"name": "PA10",
"type": "bidirectional",
"description": "FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX, OTG_HS_ID, MDIOS_MDIO, DCMI_D1/PSSI_D1 and LCD_B1."
},
{
"number": "70",
"name": "PA11",
"type": "bidirectional",
"description": "FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_SS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX and LCD_R4; additional function OTG_HS_DM."
},
{
"number": "71",
"name": "PA12",
"type": "bidirectional",
"description": "FT_u I/O (USB option, supplied by VDD33USB); alternate functions include TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX and LCD_R5; additional function OTG_HS_DP."
},
{
"number": "72",
"name": "PA13",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O; function after reset is JTMS/SWDIO (SWD debug data), with EVENTOUT as alternate function."
},
{
"number": "73",
"name": "VCAP",
"type": "power_in",
"description": "Connection for the external VCORE decoupling capacitor; with the internal regulator OFF, the external VCORE voltage (1.0-1.35 V depending on VOS, Table 22) must be supplied on VCAP pins."
},
{
"number": "74",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "75",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
},
{
"number": "76",
"name": "PA14(JTCK/SWCLK)",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O; function after reset is JTCK/SWCLK (SWD clock), with EVENTOUT as alternate function."
},
{
"number": "77",
"name": "PA15(JTDI)",
"type": "bidirectional",
"description": "5 V-tolerant FT I/O; function after reset is JTDI, with alternate functions including TIM2_CH1/TIM2_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, UART4_RTS, UART7_TX and LCD_B6."
},
{
"number": "78",
"name": "PC10",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPIM_P1_IO1, SWPMI_RX, SDMMC1_D2 and DCMI_D8/PSSI_D8."
},
{
"number": "79",
"name": "PC11",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPIM_P1_NCS, SDMMC1_D3 and DCMI_D4/PSSI_D4."
},
{
"number": "80",
"name": "PC12",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED3, TIM15_CH1, DFSDM2_CKOUT, SPI6_SCK/I2S6_CK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9/PSSI_D9."
},
{
"number": "81",
"name": "PD0",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKIN6, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_DA2 and LCD_B1."
},
{
"number": "82",
"name": "PD1",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_DATIN6, UART4_TX, FDCAN1_TX and FMC_D3/FMC_DA3."
},
{
"number": "83",
"name": "PD2",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group, mainly SDMMC2); alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, LCD_B7, SDMMC1_CMD, DCMI_D11/PSSI_D11 and LCD_B2."
},
{
"number": "84",
"name": "PD3",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5 and LCD_G7."
},
{
"number": "85",
"name": "PD4",
"type": "bidirectional",
"description": "FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include USART2_RTS, OCTOSPIM_P1_IO4, FMC_NOE and EVENTOUT."
},
{
"number": "86",
"name": "PD5",
"type": "bidirectional",
"description": "FT_h1 I/O (high-speed low-voltage group, mainly OCTOSPI); alternate functions include USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE and EVENTOUT."
},
{
"number": "87",
"name": "PD6",
"type": "bidirectional",
"description": "FT_sh3 I/O (secondary supply VDDMMC, high-speed low-voltage group); alternate functions include SAI1_D1, DFSDM1_CKIN4, SPI3_MOSI/I2S3_SDO, USART2_RX, OCTOSPIM_P1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10 and LCD_B2."
},
{
"number": "88",
"name": "PD7",
"type": "bidirectional",
"description": "FT_sh3 I/O (secondary supply VDDMMC, high-speed low-voltage group); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN0, OCTOSPIM_P1_IO7, SDMMC2_CMD and FMC_NE1."
},
{
"number": "89",
"name": "PB3(JTDO/TRACESWO)",
"type": "bidirectional",
"description": "FT_h0 I/O; function after reset is JTDO/TRACESWO, with alternate functions including TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX."
},
{
"number": "90",
"name": "PB4(NJTRST)",
"type": "bidirectional",
"description": "FT_h0 I/O; function after reset is NJTRST, with alternate functions including TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI, SPI2_SS/I2S2_WS, SDMMC2_D3 and UART7_TX."
},
{
"number": "91",
"name": "PB5",
"type": "bidirectional",
"description": "FT_h0 I/O (high-speed low-voltage group); alternate functions include TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, I2C4_SMBA, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1, DCMI_D10/PSSI_D10 and UART5_RX."
},
{
"number": "92",
"name": "PB6",
"type": "bidirectional",
"description": "FT_f I/O (I2C FM+ option); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPIM_P1_NCS, FMC_SDNE1, DCMI_D5/PSSI_D5 and UART5_TX."
},
{
"number": "93",
"name": "PB7",
"type": "bidirectional",
"description": "FT_fa I/O (I2C FM+ and analog option); alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, FMC_NL and DCMI_VSYNC/PSSI_RDY; additional function PVD_IN."
},
{
"number": "94",
"name": "BOOT0",
"type": "input",
"description": "Dedicated BOOT0 input pin; input voltage range is 0 to 9 V (Table 22)."
},
{
"number": "95",
"name": "PB8",
"type": "bidirectional",
"description": "FT_fsh3 I/O (I2C FM+ option, secondary supply VDDMMC); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX, SDMMC2_D4, SDMMC1_D4 and DCMI_D6/PSSI_D6."
},
{
"number": "96",
"name": "PB9",
"type": "bidirectional",
"description": "FT_fsh3 I/O (I2C FM+ option, secondary supply VDDMMC); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_SS/I2S2_WS, I2C4_SDA, UART4_TX, FDCAN1_TX, SDMMC2_D5, SDMMC1_D5 and DCMI_D7/PSSI_D7."
},
{
"number": "97",
"name": "PE0",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM1_ETR, TIM4_ETR, LPTIM2_ETR, UART8_RX, SAI2_MCK_A, FMC_NBL0, DCMI_D2/PSSI_D2 and LCD_R0."
},
{
"number": "98",
"name": "PE1",
"type": "bidirectional",
"description": "FT_h2 I/O (high-speed low-voltage group, mainly FMC); alternate functions include LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3/PSSI_D3 and LCD_R6."
},
{
"number": "99",
"name": "VSS",
"type": "power_in",
"description": "Ground pin; must always be connected to the external supply within the permitted range (Table 19 note)."
},
{
"number": "100",
"name": "VDD",
"type": "power_in",
"description": "Standard operating voltage, 1.62 V to 3.6 V (Table 22); all VDD pins must be connected."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package variant: the MPN STM32H7B3VIT6 has no 'Q' suffix. The datasheet states that the SMPS devices; Pin 8 is labelled 'PC14-OSC32_ON' in Figure 6 but 'PC14-OSC32_IN' in Table 7. The Table 7 name was u; PC2 is not bonded on the LQFP100 without SMPS. Pin 17 is PC2_C (analog pad), per Figure 6 and Table "
],
"pages_sent": 96,
"cost_usd": 0.5736,
"at": "2026-11-13T20:19:40"
},
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/stm32h7b3vi.pdf",
"pages": 238,
"sha256": "79cfcb3fc210a55d",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 100,
"described": 100,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "stm32h7b3vit6.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16,
16,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "stm32h7b3vit6-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16,
16,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "8cb9855447996694de65e9a4d75b94b0a604e544b1d4a266535704d77509cc91",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "LQFP100 (package code 1L)",
"source_page": 190,
"D": {
"nom_mm": 14,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 14,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 16,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.5,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "stm32h7b3vit6.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "LQFP-100(14x14)",
"Category": "Embedded Processors & Controllers",
"Pins": "100"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "79cfcb3fc210a55d3aed5250a092bb2c0af56d9cb6f9469effff7e2fedd70618",
"rows": [
{
"name": "External main supply voltage (including VDD, VDDLDO, VDDSMPS, VDDA, VDD33USB, VDDMMC, VBAT, VREF+)",
"symbol": "VDDX − VSS",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 81,
"source": "datasheet"
},
{
"name": "Input voltage on FT_xxx pins",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "",
"source_page": 81,
"source": "datasheet"
},
{
"name": "Input voltage on TT_xx pins",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 81,
"source": "datasheet"
},
{
"name": "Input voltage on BOOT0 pin",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": 0,
"typ": null,
"max": 9,
"conditions": "",
"source_page": 81,
"source": "datasheet"
},
{
"name": "Input voltage on any other pins",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 81,
"source": "datasheet"
},
{
"name": "Variations between different VDDX power pins of the same domain",
"symbol": "|ΔVDDX|",
"kind": "absolute_maximum",
"unit": "mV",
"min": null,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 81,
"source": "datasheet"
},
{
"name": "Variations between all the different ground pins",
"symbol": "|VSSx−VSS|",
"kind": "absolute_maximum",
"unit": "mV",
"min": null,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Total current into sum of all VDD power lines (source)",
"symbol": "ΣIVDD",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 620,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Total current out of sum of all VSS ground lines (sink)",
"symbol": "ΣIVSS",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 620,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Maximum current into each VDD power pin (source)",
"symbol": "IVDD",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Maximum current out of each VSS ground pin (sink)",
"symbol": "IVSS",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Output current sunk or sourced by any I/O and control pin",
"symbol": "IIO",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 20,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Output current sunk or sourced by Pxy_C pin",
"symbol": "IIO",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 1,
"conditions": "Pxy_C pin",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Total output current sunk by sum of all I/Os and control pins",
"symbol": "ΣI(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 140,
"conditions": "Sunk",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Total output current sourced by sum of all I/Os and control pins",
"symbol": "ΣI(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 140,
"conditions": "Sourced",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Injected current on FT_xxx, TT_xx, RST and B pins except PA4, PA5",
"symbol": "IINJ(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": -5,
"typ": null,
"max": 0,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Injected current on PA4, PA5",
"symbol": "IINJ(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": 0,
"typ": null,
"max": 0,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Total injected current (sum of all I/Os and control pins)",
"symbol": "ΣIINJ(PIN)",
"kind": "absolute_maximum",
"unit": "mA",
"min": -25,
"typ": null,
"max": 25,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Storage temperature range",
"symbol": "TSTG",
"kind": "thermal",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 82,
"source": "datasheet"
},
{
"name": "Maximum junction temperature",
"symbol": "TJmax",
"kind": "thermal",
"unit": "°C",
"min": null,
"typ": null,
"max": 130,
"conditions": "Limited to 105 °C in VOS0 voltage range",
"source_page": 82,
"source": "datasheet"
},
{
"name": "ESD voltage (human body model), packages without SMPS",
"symbol": "VESD(HBM)",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 2000,
"conditions": "TA = +25 °C, ANSI/ESDA/JEDEC JS-001; class 2",
"source_page": 116,
"source": "datasheet"
},
{
"name": "ESD voltage (charge device model), all LQFP packages and WLCSP",
"symbol": "VESD(CDM)",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 250,
"conditions": "TA = +25 °C, ANSI/ESDA/JEDEC JS-002; class C1",
"source_page": 116,
"source": "datasheet"
},
{
"name": "Standard operating voltage",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 1.62,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Supply voltage for the internal regulator",
"symbol": "VDDLDO",
"kind": "recommended_operating",
"unit": "V",
"min": 1.62,
"typ": null,
"max": 3.6,
"conditions": "VDDLDO ≤ VDD",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Standard operating voltage for independent MMC I/Os",
"symbol": "VDDMMC",
"kind": "recommended_operating",
"unit": "V",
"min": 1.62,
"typ": null,
"max": 3.6,
"conditions": "Independent MMC I/Os used",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Standard operating voltage, USB domain",
"symbol": "VDD33USB",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": null,
"max": 3.6,
"conditions": "USB used",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Standard operating voltage, USB domain",
"symbol": "VDD33USB",
"kind": "recommended_operating",
"unit": "V",
"min": 0,
"typ": null,
"max": 3.6,
"conditions": "USB not used",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Analog operating voltage",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 1.62,
"typ": null,
"max": 3.6,
"conditions": "ADC or COMP used",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Analog operating voltage",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 1.8,
"typ": null,
"max": null,
"conditions": "DAC used",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Analog operating voltage",
"symbol": "VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 2,
"typ": null,
"max": null,
"conditions": "OPAMP used",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Backup operating voltage",
"symbol": "VBAT",
"kind": "recommended_operating",
"unit": "V",
"min": 1.2,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Internal regulator ON (LDO or SMPS) core voltage",
"symbol": "VCORE",
"kind": "recommended_operating",
"unit": "V",
"min": 0.95,
"typ": 1,
"max": 1.05,
"conditions": "VOS3 (max frequency 88 MHz)",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Internal regulator ON (LDO or SMPS) core voltage",
"symbol": "VCORE",
"kind": "recommended_operating",
"unit": "V",
"min": 1.05,
"typ": 1.1,
"max": 1.15,
"conditions": "VOS2 (max frequency 160 MHz)",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Internal regulator ON (LDO or SMPS) core voltage",
"symbol": "VCORE",
"kind": "recommended_operating",
"unit": "V",
"min": 1.15,
"typ": 1.2,
"max": 1.25,
"conditions": "VOS1 (max frequency 225 MHz)",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Internal regulator ON (LDO or SMPS) core voltage",
"symbol": "VCORE",
"kind": "recommended_operating",
"unit": "V",
"min": 1.25,
"typ": 1.3,
"max": 1.35,
"conditions": "VOS0 (max frequency 280 MHz)",
"source_page": 83,
"source": "datasheet"
},
{
"name": "Regulator OFF core voltage (external VCORE on VCAP pins)",
"symbol": "VCORE",
"kind": "recommended_operating",
"unit": "V",
"min": 1.27,
"typ": 1.3,
"max": 1.33,
"conditions": "VOS0 (max frequency 280 MHz)",
"source_page": 84,
"source": "datasheet"
},
{
"name": "Ambient temperature for the suffix 6 version",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 85,
"conditions": "Maximum power dissipation",
"source_page": 84,
"source": "datasheet"
},
{
"name": "Ambient temperature for the suffix 6 version",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 105,
"conditions": "Low-power dissipation",
"source_page": 84,
"source": "datasheet"
},
{
"name": "Junction temperature range",
"symbol": "TJ",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 105,
"conditions": "VOS0",
"source_page": 84,
"source": "datasheet"
},
{
"name": "Junction temperature range",
"symbol": "TJ",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 130,
"conditions": "VOS3, VOS2, VOS1",
"source_page": 84,
"source": "datasheet"
},
{
"name": "CPU clock frequency",
"symbol": "fCPU",
"kind": "recommended_operating",
"unit": "MHz",
"min": null,
"typ": null,
"max": 280,
"conditions": "VOS0",
"source_page": 84,
"source": "datasheet"
},
{
"name": "Minimum standard operating voltage for max frequency configuration",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 1.71,
"typ": null,
"max": null,
"conditions": "VOS0, LDO/SMPS, max frequency 280 MHz",
"source_page": 85,
"source": "datasheet"
},
{
"name": "Reset temporization after POR released",
"symbol": "tRSTTEMPO",
"kind": "timing",
"unit": "µs",
"min": null,
"typ": 377,
"max": 550,
"conditions": "",
"source_page": 91,
"source": "datasheet"
},
{
"name": "Power-on/power-down reset threshold",
"symbol": "VPOR/PDR",
"kind": "electrical",
"unit": "V",
"min": 1.62,
"typ": 1.67,
"max": 1.71,
"conditions": "Rising edge",
"source_page": 91,
"source": "datasheet"
},
{
"name": "Power-on/power-down reset threshold",
"symbol": "VPOR/PDR",
"kind": "electrical",
"unit": "V",
"min": 1.58,
"typ": 1.62,
"max": 1.68,
"conditions": "Falling edge",
"source_page": 91,
"source": "datasheet"
},
{
"name": "Internal reference voltages",
"symbol": "VREFINT",
"kind": "electrical",
"unit": "V",
"min": 1.18,
"typ": 1.216,
"max": 1.255,
"conditions": "−40 °C < TJ < 130 °C",
"source_page": 92,
"source": "datasheet"
},
{
"name": "Average voltage coefficient",
"symbol": "VDDcoeff",
"kind": "voltage_coefficient",
"unit": "ppm/V",
"min": null,
"typ": 10,
"max": 1370,
"conditions": "3.0 V < VDD < 3.6 V",
"source_page": 92,
"source": "datasheet"
},
{
"name": "Supply current in Run mode, all peripherals disabled",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": null,
"max": 128,
"conditions": "Run, code from ITCM, fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C",
"source_page": 95,
"source": "datasheet"
},
{
"name": "Supply current in Run mode, all peripherals enabled",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": null,
"max": 196,
"conditions": "Run, code from ITCM, fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C",
"source_page": 95,
"source": "datasheet"
},
{
"name": "Supply current in Sleep mode, all peripherals disabled",
"symbol": "IDD(Sleep)",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": null,
"max": 72,
"conditions": "fCPU 280 MHz (VOS0), regulator ON, TJ = 105 °C",
"source_page": 98,
"source": "datasheet"
},
{
"name": "Supply current in Standby mode",
"symbol": "IDD(Standby)",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": null,
"max": 22,
"conditions": "IWDG OFF, backup SRAM OFF, RTC & LSE OFF, max at 3.6 V, TJ = 105 °C",
"source_page": 99,
"source": "datasheet"
},
{
"name": "Oscillator frequency (HSE)",
"symbol": "F",
"kind": "electrical",
"unit": "MHz",
"min": 4,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 108,
"source": "datasheet"
},
{
"name": "HSI48 frequency",
"symbol": "fHSI48",
"kind": "electrical",
"unit": "MHz",
"min": 47.5,
"typ": 48,
"max": 48.5,
"conditions": "VDD = 3.3 V, TJ = 30 °C",
"source_page": 110,
"source": "datasheet"
},
{
"name": "HSI frequency",
"symbol": "fHSI",
"kind": "electrical",
"unit": "MHz",
"min": 63.7,
"typ": 64,
"max": 64.3,
"conditions": "VDD = 3.3 V, TJ = 30 °C",
"source_page": 111,
"source": "datasheet"
},
{
"name": "CSI frequency",
"symbol": "fCSI",
"kind": "electrical",
"unit": "MHz",
"min": 3.96,
"typ": 4,
"max": 4.04,
"conditions": "VDD = 3.3 V, TJ = 30 °C",
"source_page": 111,
"source": "datasheet"
},
{
"name": "Wakeup time from Standby mode",
"symbol": "tWUSTDBY",
"kind": "timing",
"unit": "µs",
"min": null,
"typ": 257,
"max": 330,
"conditions": "",
"source_page": 105,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"stm32h7b3vit6"
],
"discovery_pitch": "STM32H7B3VIT6 (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"stm32h7b3vit6.kicad_sym",
"stm32h7b3vit6.kicad_mod",
"stm32h7b3vit6.glb",
"stm32h7b3vit6.step",
"stm32h7b3vit6.lbr",
"docs/hero.png",
"docs/stm32h7b3vit6-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"stm32h7b3vit6-hero.glb",
"stm32h7b3vit6-hero.overlay.json"
],
"visibility": {
"public": true
}
}