main
Ray
Publish 0.1.3
c83bab3
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362
{
"slug": "pcm2906cdbr",
"version": "0.1.3",
"type": "component",
"description": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"pcm2906cdbr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pcm2906cdbr.kicad_sym",
"pcm2906cdbr.kicad_mod",
"pcm2906cdbr.glb",
"pcm2906cdbr.step",
"pcm2906cdbr.lbr",
"docs/hero.png",
"docs/pcm2906cdbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pcm2906cdbr-hero.glb",
"pcm2906cdbr-hero.overlay.json"
],
"component": {
"mpn": "PCM2906CDBR",
"manufacturer": "Texas Instruments",
"package": "SSOP-28",
"pin_count": 28,
"category": "Interface ICs",
"subcategory": "Audio Interface ICs",
"datasheet": "https://www.ti.com/lit/ds/symlink/pcm2906c.pdf",
"parts": {
"symbol": "pcm2906cdbr.kicad_sym",
"footprint": "pcm2906cdbr.kicad_mod",
"model_3d": "pcm2906cdbr-hero.glb",
"model_3d_plain": "pcm2906cdbr.glb",
"model_3d_step": "pcm2906cdbr-etched.step",
"model_3d_step_plain": "pcm2906cdbr.step",
"lbr": "pcm2906cdbr.lbr"
},
"distributor_links": {
"lcsc": "C882726",
"digikey": "296-PCM2906CDBRTR-ND",
"mouser": "595-PCM2906CDBR"
},
"distributor_check": {
"checked_at": "2026-11-17T22:42:55Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-PCM2906CDBRTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-PCM2906CDBR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "D+",
"type": "bidirectional",
"description": "USB differential data plus line, LV-TTL level, carrying control and audio data at full speed."
},
{
"number": "2",
"name": "D–",
"type": "bidirectional",
"description": "USB differential data minus line, LV-TTL level, carrying control and audio data at full speed."
},
{
"number": "3",
"name": "VBUS",
"type": "power_in",
"description": "Connect to USB bus power; VBUS voltage range is 4.35 V to 5.25 V with 5 V typical."
},
{
"number": "4",
"name": "DGNDU",
"type": "power_in",
"description": "Digital ground for the USB transceiver."
},
{
"number": "5",
"name": "HID0",
"type": "input",
"description": "Active-high HID key state input for mute; 3.3-V CMOS-level input with internal pulldown."
},
{
"number": "6",
"name": "HID1",
"type": "input",
"description": "Active-high HID key state input for volume up; 3.3-V CMOS-level input with internal pulldown."
},
{
"number": "7",
"name": "HID2",
"type": "input",
"description": "Active-high HID key state input for volume down; 3.3-V CMOS-level input with internal pulldown."
},
{
"number": "8",
"name": "SEL0",
"type": "input",
"description": "Must be set to high; TTL Schmitt-trigger input, 5-V tolerant."
},
{
"number": "9",
"name": "SEL1",
"type": "input",
"description": "Must be set to high; TTL Schmitt-trigger input, 5-V tolerant."
},
{
"number": "10",
"name": "VCCCI",
"type": "power_out",
"description": "Internal analog power supply for the codec, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."
},
{
"number": "11",
"name": "AGNDC",
"type": "power_in",
"description": "Analog ground for the codec."
},
{
"number": "12",
"name": "VINL",
"type": "input",
"description": "ADC analog input for the L channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI."
},
{
"number": "13",
"name": "VINR",
"type": "input",
"description": "ADC analog input for the R channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI."
},
{
"number": "14",
"name": "VCOM",
"type": "power_out",
"description": "Common reference for ADC and DAC at VCCCI/2; connect a decoupling capacitor to GND."
},
{
"number": "15",
"name": "VOUTR",
"type": "output",
"description": "DAC analog output for the R channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling."
},
{
"number": "16",
"name": "VOUTL",
"type": "output",
"description": "DAC analog output for the L channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling."
},
{
"number": "17",
"name": "VCCP1I",
"type": "power_out",
"description": "Internal analog power supply for the PLL; connect a decoupling capacitor to GND."
},
{
"number": "18",
"name": "AGNDP",
"type": "power_in",
"description": "Analog ground for the PLL."
},
{
"number": "19",
"name": "VCCP2I",
"type": "power_out",
"description": "Internal analog power supply for the PLL; connect a decoupling capacitor to GND."
},
{
"number": "20",
"name": "XTO",
"type": "output",
"description": "Crystal oscillator output; must be left open when an external 12-MHz clock is supplied to XTI."
},
{
"number": "21",
"name": "XTI",
"type": "input",
"description": "Crystal oscillator input or external clock input for the 12-MHz (±500 ppm) clock; 3.3-V CMOS-level input."
},
{
"number": "22",
"name": "AGNDX",
"type": "power_in",
"description": "Analog ground for the oscillator."
},
{
"number": "23",
"name": "VCCXI",
"type": "power_out",
"description": "Internal analog power supply for the oscillator; connect a decoupling capacitor to GND."
},
{
"number": "24",
"name": "DIN",
"type": "input",
"description": "S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant."
},
{
"number": "25",
"name": "DOUT",
"type": "output",
"description": "S/PDIF output encoded from the USB isochronous-out data."
},
{
"number": "26",
"name": "DGND",
"type": "power_in",
"description": "Digital ground."
},
{
"number": "27",
"name": "VDDI",
"type": "power_out",
"description": "Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."
},
{
"number": "28",
"name": "SSPND",
"type": "output",
"description": "Suspend flag, active-low output (low: suspend, high: operational), 3.3-V CMOS-level output."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Internal supply and reference pins are typed power_out based on the datasheet describing them as int; The datasheet gives D+ and D– as I/O with LV-TTL level but no explicit voltage limits; they are type; Analog input and output limits (0.6 VCCCI VPP swing, 0.5 VCCCI center voltage) are taken from the el"
],
"pages_sent": 34,
"cost_usd": 0.125,
"at": "2026-11-17T22:42:16"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/pcm2906c.pdf",
"pages": 34,
"sha256": "62824baa1014b78d",
"source_tier": "mfr",
"citation": "Texas Instruments datasheet"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "pcm2906cdbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pcm2906cdbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "640a6da1b0b848b3f0a142d26732439d3397c9ae7228343e2ae5dbfe360de6eb",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DB (SSOP-28, DB0028A)",
"source_page": 31,
"D": {
"nom_mm": 10.2,
"range_mm": [
9.9,
10.5
]
},
"E1": {
"nom_mm": 5.3,
"range_mm": [
5.0,
5.6
]
},
"E": {
"nom_mm": 7.8,
"range_mm": [
7.4,
8.2
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.0,
"range_mm": [
null,
2.0
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "pcm2906cdbr.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}