← Commit history
Publish 0.1.3
5 files changed
+171−161
README.md+86−80@@ -8,34 +8,34 @@ PCM2906CDBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions ex | Pin | Name | Type | Function | |---|---|---|---|-| 1 | D+ | bidirectional | USB full-speed differential data line (plus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V. |-| 2 | D- | bidirectional | USB full-speed differential data line (minus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V. |-| 3 | VBUS | power_in | Connects to USB bus power (VBUS), with a 4.35 V to 5.25 V operating range (5 V typical) and an absolute maximum of 6.5 V. |-| 4 | DGNDU | power_in | Digital ground for the USB transceiver, with ground voltage differences limited to ±0.1 V. |-| 5 | HID0 | input | HID key state input for mute, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control. |-| 6 | HID1 | input | HID key state input for volume up, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control. |-| 7 | HID2 | input | HID key state input for volume down, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control. |-| 8 | SEL0 | input | Must be set high; TTL Schmitt-trigger input, 5-V tolerant. |-| 9 | SEL1 | input | Must be set high; TTL Schmitt-trigger input, 5-V tolerant. |-| 10 | VCCCI | power_out | Internal analog power supply for the codec (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |-| 11 | AGNDC | power_in | Analog ground for the codec, with ground voltage differences limited to ±0.1 V. |-| 12 | VINL | input | ADC analog input for the L channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ. |-| 13 | VINR | input | ADC analog input for the R channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ. |-| 14 | VCOM | passive | Common reference for ADC/DAC at VCCCI/2, requires a decoupling capacitor to GND. |-| 15 | VOUTR | output | DAC analog output for the R channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance. |-| 16 | VOUTL | output | DAC analog output for the L channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance. |-| 17 | VCCP1I | power_out | Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |-| 18 | AGNDP | power_in | Analog ground for the PLL, with ground voltage differences limited to ±0.1 V. |-| 19 | VCCP2I | power_out | Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |-| 20 | XTO | output | Crystal oscillator output for the 12-MHz resonator; must be left open when an external clock drives XTI. |-| 21 | XTI | input | Crystal oscillator input or external 12-MHz clock input (11.994 MHz to 12.006 MHz), 3.3-V CMOS level. |-| 22 | AGNDX | power_in | Analog ground for the oscillator, with ground voltage differences limited to ±0.1 V. |-| 23 | VCCXI | power_out | Internal analog power supply for the oscillator (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |-| 24 | DIN | input | S/PDIF input, 3.3-V CMOS level with internal pulldown, 5-V tolerant. |-| 25 | DOUT | output | S/PDIF output, with VOH of at least 2.8 V and VOL of at most 0.3 V at the specified test loads. |-| 26 | DGND | power_in | Digital ground, with ground voltage differences limited to ±0.1 V. |-| 27 | VDDI | power_out | Internal digital power supply (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |-| 28 | SSPND | output | Suspend flag, active-low (low: suspend, high: operational), with VOH of at least 2.8 V and VOL of at most 0.5 V. |+| 1 | D+ | bidirectional | USB differential data plus line, LV-TTL level, carrying control and audio data at full speed. |+| 2 | D- | bidirectional | USB differential data minus line, LV-TTL level, carrying control and audio data at full speed. |+| 3 | VBUS | power_in | Connect to USB bus power; VBUS voltage range is 4.35 V to 5.25 V with 5 V typical. |+| 4 | DGNDU | power_in | Digital ground for the USB transceiver. |+| 5 | HID0 | input | Active-high HID key state input for mute; 3.3-V CMOS-level input with internal pulldown. |+| 6 | HID1 | input | Active-high HID key state input for volume up; 3.3-V CMOS-level input with internal pulldown. |+| 7 | HID2 | input | Active-high HID key state input for volume down; 3.3-V CMOS-level input with internal pulldown. |+| 8 | SEL0 | input | Must be set to high; TTL Schmitt-trigger input, 5-V tolerant. |+| 9 | SEL1 | input | Must be set to high; TTL Schmitt-trigger input, 5-V tolerant. |+| 10 | VCCCI | power_out | Internal analog power supply for the codec, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |+| 11 | AGNDC | power_in | Analog ground for the codec. |+| 12 | VINL | input | ADC analog input for the L channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI. |+| 13 | VINR | input | ADC analog input for the R channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI. |+| 14 | VCOM | power_out | Common reference for ADC and DAC at VCCCI/2; connect a decoupling capacitor to GND. |+| 15 | VOUTR | output | DAC analog output for the R channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling. |+| 16 | VOUTL | output | DAC analog output for the L channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling. |+| 17 | VCCP1I | power_out | Internal analog power supply for the PLL; connect a decoupling capacitor to GND. |+| 18 | AGNDP | power_in | Analog ground for the PLL. |+| 19 | VCCP2I | power_out | Internal analog power supply for the PLL; connect a decoupling capacitor to GND. |+| 20 | XTO | output | Crystal oscillator output; must be left open when an external 12-MHz clock is supplied to XTI. |+| 21 | XTI | input | Crystal oscillator input or external clock input for the 12-MHz (±500 ppm) clock; 3.3-V CMOS-level input. |+| 22 | AGNDX | power_in | Analog ground for the oscillator. |+| 23 | VCCXI | power_out | Internal analog power supply for the oscillator; connect a decoupling capacitor to GND. |+| 24 | DIN | input | S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant. |+| 25 | DOUT | output | S/PDIF output encoded from the USB isochronous-out data. |+| 26 | DGND | power_in | Digital ground. |+| 27 | VDDI | power_out | Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |+| 28 | SSPND | output | Suspend flag, active-low output (low: suspend, high: operational), 3.3-V CMOS-level output. | ## Key specifications @@ -52,66 +52,72 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Input logic level, pins D+, D- (footnote 1) | VIH | 2 | 3.3 | | VDC | | 3 |-| Input logic level, pins D+, D- (footnote 1) | VIL | | | 0.8 | VDC | | 3 |-| Input logic level, pins XTI, HID0-HID2 (footnotes 2, 3) | VIH | 2.52 | 3.3 | | VDC | | 3 |-| Input logic level, pins XTI, HID0-HID2 (footnotes 2, 3) | VIL | | | 0.9 | VDC | | 3 |-| Input logic level, pins SEL0, SEL1 (footnote 4) | VIH | 2 | 5.25 | | VDC | | 3 |-| Input logic level, pins SEL0, SEL1 (footnote 4) | VIL | | | 0.8 | VDC | | 3 |-| Input logic level, pin DIN (footnote 5) | VIH | 2.52 | 5.25 | | VDC | | 3 |-| Input logic level, pin DIN (footnote 5) | VIL | | | 0.9 | VDC | | 3 |-| Input logic current, pins D+, D-, XTI, SEL0, SEL1 (footnotes 1, 2, 4) high | IIH | -10 | | 10 | μA | VIN = 3.3 V | 3 |-| Input logic current, pins D+, D-, XTI, SEL0, SEL1 (footnotes 1, 2, 4) low | IIL | -10 | | 10 | μA | VIN = 0 V | 3 |-| Input logic current, pins HID0-HID2 (footnote 3) high | IIH | 50 | 80 | | μA | VIN = 3.3 V | 3 |-| Input logic current, pins HID0-HID2 (footnote 3) low | IIL | -10 | | 10 | μA | VIN = 0 V | 3 |-| Input logic current, pin DIN (footnote 5) high | IIH | 65 | 100 | | μA | VIN = 3.3 V | 3 |-| Input logic current, pin DIN (footnote 5) low | IIL | -10 | | 10 | μA | VIN = 0 V | 3 |-| Output logic level, pins D+, D- (footnote 1) high | VOH | 2.8 | | | VDC | | 3 |-| Output logic level, pins D+, D- (footnote 1) low | VOL | | | 0.3 | VDC | | 3 |-| Output logic level, pin DOUT (footnote 6) high | VOH | 2.8 | | | VDC | IOH = -4 mA | 3 |-| Output logic level, pin DOUT (footnote 6) low | VOL | | | 0.5 | VDC | IOL = 4 mA | 3 |-| Output logic level, pin SSPND (footnote 7) high | VOH | 2.8 | | | VDC | IOH = -2 mA | 3 |-| Output logic level, pin SSPND (footnote 7) low | VOL | | | 0.5 | VDC | IOL = 2 mA | 3 |-| Input clock frequency, XTI | | 11.994 | 12 | 12.006 | MHz | | 3 |-| ADC gain mismatch, channel-to-channel | | -5 | 1 | 5 | % of FSR | | 4 |-| ADC gain error | | -10 | 2 | 10 | % of FSR | | 4 |+| Supply voltage, VBUS | VBUS | -0.3 | | 6.5 | V | | 2 |+| Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU | | -0.1 | | 0.1 | V | | 2 |+| Digital input voltage, SEL0, SEL1, DIN | VI | -0.3 | | 6.5 | V | | 2 |+| Digital input voltage, D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND | VI | -0.3 | | 4 | V | Max printed as (VDDI + 0.3) < 4 | 2 |+| Analog input voltage, VINL, VINR, VCOM, VOUTR, VOUTL | VI | -0.3 | | 4 | V | Max printed as (VCCCI + 0.3) < 4 | 2 |+| Supply voltage, VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI | | -0.3 | | 4 | V | | 2 |+| Input current (any pins except supplies) | II | -10 | | 10 | mA | | 2 |+| Ambient temperature under bias | TA | -40 | | 125 | °C | | 2 |+| Storage temperature | Tstg | -55 | | 150 | °C | | 2 |+| Junction temperature | TJ | | | 150 | °C | | 2 |+| Lead temperature (soldering, 5 s) | | | | 260 | °C | 5 s | 2 |+| Package temperature (IR reflow, peak) | | | | 250 | °C | | 2 |+| VBUS voltage range | VBUS | 4.35 | 5 | 5.25 | V | | 5 |+| Operating temperature range | TA | -25 | | 85 | °C | | 5 |+| Internal power-supply voltage | | 3.1 | 3.3 | 3.5 | V | Pins 10, 17, 19, 23, 27 | 5 |+| Supply current, ADC, DAC operation | | | 56 | 67 | mA | ADC, DAC operation | 5 |+| Supply current, suspend mode | | | | 250 | μA | Suspend mode, in USB suspend state | 5 |+| Power dissipation, ADC, DAC operation | PD | | 280 | 352 | mW | ADC, DAC operation | 5 |+| Power dissipation, suspend mode | PD | | | 1.25 | mW | Suspend mode, in USB suspend state | 5 |+| Input logic level, high (pins 1, 2) | VIH | 2 | | 3.3 | V | Footnote (1); printed as 2 and 3.3 without column label | 3 |+| Input logic level, low (pins 1, 2) | VIL | | | 0.8 | V | Footnote (1) | 3 |+| Input logic level, high (pins 21, 5, 6, 7) | VIH | 2.52 | | 3.3 | V | Footnotes (2)(3) | 3 |+| Input logic level, low (pins 21, 5, 6, 7) | VIL | | | 0.9 | V | Footnotes (2)(3) | 3 |+| Input logic level, high (pins 8, 9) | VIH | 2 | | 5.25 | V | Footnote (4) | 3 |+| Input logic level, low (pins 8, 9) | VIL | | | 0.8 | V | Footnote (4) | 3 |+| Input logic level, high (pin 24) | VIH | 2.52 | | 5.25 | V | Footnote (5) | 3 |+| Input logic level, low (pin 24) | VIL | | | 0.9 | V | Footnote (5) | 3 |+| Input logic current, high (pins 1, 2, 21, 8, 9) | IIH | -10 | | 10 | μA | VIN = 3.3 V | 3 |+| Input logic current, low (pins 1, 2, 21, 8, 9) | IIL | -10 | | 10 | μA | VIN = 0 V | 3 |+| Input logic current, high (pins 5, 6, 7) | IIH | 50 | | 80 | μA | VIN = 3.3 V | 3 |+| Input logic current, low (pins 5, 6, 7) | IIL | -10 | | 10 | μA | VIN = 0 V | 3 |+| Input logic current, high (pin 24) | IIH | 65 | | 100 | μA | VIN = 3.3 V | 3 |+| Input logic current, low (pin 24) | IIL | -10 | | 10 | μA | VIN = 0 V | 3 |+| Output logic level, high (pin 25) | VOH | 2.8 | | | V | Footnote (1) | 3 |+| Output logic level, low (pin 25) | VOL | | | 0.3 | V | Footnote (1) | 3 |+| Output logic level, low (pin 25) | VOL | | | 0.5 | V | IOL = 4 mA | 3 |+| Output logic level, high (pin 28) | VOH | 2.8 | | | V | IOH = -2 mA | 3 |+| Output logic level, low (pin 28) | VOL | | | 0.5 | V | IOL = 2 mA | 3 |+| Input clock frequency, XTI | fXTI | 11.994 | 12 | 12.006 | MHz | | 3 |+| ADC gain mismatch, channel-to-channel | | -5 | | 5 | % of FSR | channel-to-channel; printed ±1 typ, ±5 limit | 4 |+| ADC gain error | | -10 | | 10 | % of FSR | | 4 | | ADC bipolar zero error | | 0 | | 0 | % of FSR | | 4 |-| ADC total harmonic distortion + noise, THD+N | THD+N | | 0.01 | 0.02 | % | VIN = -1 dB, VCCCI = 3.67 V | 4 |-| ADC total harmonic distortion + noise, THD+N (footnote 10) | THD+N | | | 0.1 | % | VIN = -1 dB | 4 |-| ADC digital filter passband ripple | | -0.05 | | 0.05 | dB | | 4 |+| ADC total harmonic distortion + noise | THD+N | | 0.01 | 0.02 | % | VIN = -1 dB, VCCCI = 3.67 V | 4 |+| ADC total harmonic distortion + noise | THD+N | | | 0.1 | % | VIN = -1 dB | 4 |+| ADC total harmonic distortion + noise | THD+N | | | 5 | % | VIN = -60 dB | 4 | | ADC dynamic range | | 81 | 89 | | dB | A-weighted | 4 | | ADC signal-to-noise ratio | SNR | 81 | 89 | | dB | A-weighted | 4 | | ADC channel separation | | 80 | 85 | | dB | | 4 |-| DAC gain mismatch, channel-to-channel | | -5 | 1 | 5 | % of FSR | | 5 |-| DAC gain error | | -10 | 2 | 10 | % of FSR | | 5 |+| ADC digital filter passband ripple | | -0.05 | | 0.05 | dB | | 4 |+| ADC digital filter stop-band attenuation | | | | -65 | dB | | 4 |+| DAC gain mismatch, channel-to-channel | | -5 | | 5 | % of FSR | channel-to-channel; printed ±1 typ, ±5 limit | 5 |+| DAC gain error | | -10 | | 10 | % of FSR | | 5 | | DAC bipolar zero error | | -2 | | 2 | % of FSR | | 5 |-| DAC total harmonic distortion + noise, THD+N | THD+N | | 0.005 | 0.016 | % | VOUT = 0 dB | 5 |+| DAC total harmonic distortion + noise | THD+N | | 0.005 | 0.016 | % | VOUT = 0 dB | 5 |+| DAC total harmonic distortion + noise | THD+N | | | 3 | % | VOUT = -60 dB | 5 | | DAC dynamic range | | 87 | 93 | | dB | EIAJ, A-weighted | 5 | | DAC signal-to-noise ratio | SNR | 90 | 96 | | dB | EIAJ, A-weighted | 5 | | DAC channel separation | | 86 | 92 | | dB | | 5 |+| DAC load impedance | | 10 | | | kΩ | AC coupling | 5 | | DAC digital filter passband ripple | | -0.1 | | 0.1 | dB | | 5 |-| VBUS voltage range | VBUS | 4.35 | 5 | 5.25 | VDC | | 5 |-| Supply current, ADC, DAC operation | | | 56 | 67 | mA | ADC, DAC operation | 5 |-| Supply current, suspend mode | | | | 250 | μA | Suspend mode | 5 |-| Power dissipation, ADC, DAC operation | PD | | 280 | 352 | mW | ADC, DAC operation | 5 |-| Power dissipation, suspend mode | PD | | | 1.25 | mW | Suspend mode | 5 |-| Internal power-supply voltage (pins 10, 17, 19, 23, 27) | | 3.1 | 3.3 | 3.5 | VDC | | 5 |-| Operating temperature range | | -25 | | 85 | °C | | 5 |-| Supply voltage, VBUS | VBUS | -0.3 | | 6.5 | V | | 2 |-| Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU | | -0.1 | | 0.1 | V | | 2 |-| Digital input voltage, SEL0, SEL1, DIN | | -0.3 | | 6.5 | V | | 2 |-| Digital input voltage, D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND | | -0.3 | | 4 | V | | 2 |-| Analog input voltage, VINL, VINR, VCOM, VOUTR, VOUTL | | -0.3 | | 4 | V | | 2 |-| Supply voltage, internal (VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI) | VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI | -0.3 | | 4 | V | | 2 |-| Input current (any pins except supplies) | | -10 | | 10 | mA | | 2 |-| Ambient temperature under bias | | -40 | | 125 | °C | | 2 |-| Storage temperature | Tstg | -55 | | 150 | °C | | 2 |-| Junction temperature | TJ | | | 150 | °C | | 2 |-| Lead temperature (soldering) | | | | 260 | °C | soldering, 5 s | 2 |-| Package temperature (IR reflow, peak) | | | | 250 | °C | | 2 |-| Junction-to-ambient thermal resistance | θJA | | 64.5 | | °C/W | | 2 |-| Junction-to-case (top) thermal resistance | θJCtop | | 24.5 | | °C/W | | 2 |-| Junction-to-board thermal resistance | θJB | | 25.4 | | °C/W | | 2 |+| DAC digital filter stop-band attenuation | | | | -43 | dB | | 5 |+| Thermal resistance, junction-to-ambient (DB SSOP, 28 pins) | θJA | | 64.5 | | °C/W | | 2 |+| Thermal resistance, junction-to-case (top) (DB SSOP, 28 pins) | θJCtop | | 24.5 | | °C/W | | 2 |+| Thermal resistance, junction-to-board (DB SSOP, 28 pins) | θJB | | 25.4 | | °C/W | | 2 |+| Junction-to-top characterization parameter (DB SSOP, 28 pins) | ψJT | | 2 | | °C/W | | 2 |+| Junction-to-board characterization parameter (DB SSOP, 28 pins) | ψJB | | 25 | | °C/W | | 2 | ## CAD (KiCad official) @@ -124,7 +130,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcm2906c.pdf) (34 pp, sha256 `62824baa1014b78d`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcm2906c.pdf) (34 pp, sha256 `62824baa1014b78d`, retrieved 2026-11-17) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+40−39@@ -1,6 +1,6 @@ { "slug": "pcm2906cdbr",- "version": "0.1.2",+ "version": "0.1.3", "type": "component", "description": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "595-PCM2906CDBR" }, "distributor_check": {- "checked_at": "2026-11-13T01:44:13Z",+ "checked_at": "2026-11-17T22:42:55Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-PCM2906CDBRTR-ND",@@ -69,169 +69,169 @@ "number": "1", "name": "D+", "type": "bidirectional",- "description": "USB full-speed differential data line (plus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V."+ "description": "USB differential data plus line, LV-TTL level, carrying control and audio data at full speed." }, { "number": "2", "name": "D–", "type": "bidirectional",- "description": "USB full-speed differential data line (minus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V."+ "description": "USB differential data minus line, LV-TTL level, carrying control and audio data at full speed." }, { "number": "3", "name": "VBUS", "type": "power_in",- "description": "Connects to USB bus power (VBUS), with a 4.35 V to 5.25 V operating range (5 V typical) and an absolute maximum of 6.5 V."+ "description": "Connect to USB bus power; VBUS voltage range is 4.35 V to 5.25 V with 5 V typical." }, { "number": "4", "name": "DGNDU", "type": "power_in",- "description": "Digital ground for the USB transceiver, with ground voltage differences limited to ±0.1 V."+ "description": "Digital ground for the USB transceiver." }, { "number": "5", "name": "HID0", "type": "input",- "description": "HID key state input for mute, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."+ "description": "Active-high HID key state input for mute; 3.3-V CMOS-level input with internal pulldown." }, { "number": "6", "name": "HID1", "type": "input",- "description": "HID key state input for volume up, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."+ "description": "Active-high HID key state input for volume up; 3.3-V CMOS-level input with internal pulldown." }, { "number": "7", "name": "HID2", "type": "input",- "description": "HID key state input for volume down, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."+ "description": "Active-high HID key state input for volume down; 3.3-V CMOS-level input with internal pulldown." }, { "number": "8", "name": "SEL0", "type": "input",- "description": "Must be set high; TTL Schmitt-trigger input, 5-V tolerant."+ "description": "Must be set to high; TTL Schmitt-trigger input, 5-V tolerant." }, { "number": "9", "name": "SEL1", "type": "input",- "description": "Must be set high; TTL Schmitt-trigger input, 5-V tolerant."+ "description": "Must be set to high; TTL Schmitt-trigger input, 5-V tolerant." }, { "number": "10", "name": "VCCCI", "type": "power_out",- "description": "Internal analog power supply for the codec (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal analog power supply for the codec, 3.1 V to 3.5 V; connect a decoupling capacitor to GND." }, { "number": "11", "name": "AGNDC", "type": "power_in",- "description": "Analog ground for the codec, with ground voltage differences limited to ±0.1 V."+ "description": "Analog ground for the codec." }, { "number": "12", "name": "VINL", "type": "input",- "description": "ADC analog input for the L channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ."+ "description": "ADC analog input for the L channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI." }, { "number": "13", "name": "VINR", "type": "input",- "description": "ADC analog input for the R channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ."+ "description": "ADC analog input for the R channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI." }, { "number": "14", "name": "VCOM",- "type": "passive",- "description": "Common reference for ADC/DAC at VCCCI/2, requires a decoupling capacitor to GND."+ "type": "power_out",+ "description": "Common reference for ADC and DAC at VCCCI/2; connect a decoupling capacitor to GND." }, { "number": "15", "name": "VOUTR", "type": "output",- "description": "DAC analog output for the R channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance."+ "description": "DAC analog output for the R channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling." }, { "number": "16", "name": "VOUTL", "type": "output",- "description": "DAC analog output for the L channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance."+ "description": "DAC analog output for the L channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling." }, { "number": "17", "name": "VCCP1I", "type": "power_out",- "description": "Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal analog power supply for the PLL; connect a decoupling capacitor to GND." }, { "number": "18", "name": "AGNDP", "type": "power_in",- "description": "Analog ground for the PLL, with ground voltage differences limited to ±0.1 V."+ "description": "Analog ground for the PLL." }, { "number": "19", "name": "VCCP2I", "type": "power_out",- "description": "Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal analog power supply for the PLL; connect a decoupling capacitor to GND." }, { "number": "20", "name": "XTO", "type": "output",- "description": "Crystal oscillator output for the 12-MHz resonator; must be left open when an external clock drives XTI."+ "description": "Crystal oscillator output; must be left open when an external 12-MHz clock is supplied to XTI." }, { "number": "21", "name": "XTI", "type": "input",- "description": "Crystal oscillator input or external 12-MHz clock input (11.994 MHz to 12.006 MHz), 3.3-V CMOS level."+ "description": "Crystal oscillator input or external clock input for the 12-MHz (±500 ppm) clock; 3.3-V CMOS-level input." }, { "number": "22", "name": "AGNDX", "type": "power_in",- "description": "Analog ground for the oscillator, with ground voltage differences limited to ±0.1 V."+ "description": "Analog ground for the oscillator." }, { "number": "23", "name": "VCCXI", "type": "power_out",- "description": "Internal analog power supply for the oscillator (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal analog power supply for the oscillator; connect a decoupling capacitor to GND." }, { "number": "24", "name": "DIN", "type": "input",- "description": "S/PDIF input, 3.3-V CMOS level with internal pulldown, 5-V tolerant."+ "description": "S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant." }, { "number": "25", "name": "DOUT", "type": "output",- "description": "S/PDIF output, with VOH of at least 2.8 V and VOL of at most 0.3 V at the specified test loads."+ "description": "S/PDIF output encoded from the USB isochronous-out data." }, { "number": "26", "name": "DGND", "type": "power_in",- "description": "Digital ground, with ground voltage differences limited to ±0.1 V."+ "description": "Digital ground." }, { "number": "27", "name": "VDDI", "type": "power_out",- "description": "Internal digital power supply (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND." }, { "number": "28", "name": "SSPND", "type": "output",- "description": "Suspend flag, active-low (low: suspend, high: operational), with VOH of at least 2.8 V and VOL of at most 0.5 V."+ "description": "Suspend flag, active-low output (low: suspend, high: operational), 3.3-V CMOS-level output." } ], "provenance": {@@ -245,17 +245,18 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Datasheet calls these internal supplies (3.1 to 3.5 V) fed from the internal 5-V to 3.3-V regulator,; VCOM is an internal reference node (VCCCI/2) that only needs a decoupling capacitor; typed as passiv; Datasheet gives LV-TTL level and absolute-maximum limits but no separate DC logic thresholds for D+/"+ "extractor flagged: Internal supply and reference pins are typed power_out based on the datasheet describing them as int; The datasheet gives D+ and D– as I/O with LV-TTL level but no explicit voltage limits; they are type; Analog input and output limits (0.6 VCCCI VPP swing, 0.5 VCCCI center voltage) are taken from the el" ], "pages_sent": 34,- "cost_usd": 0.1273,- "at": "2026-11-13T01:43:52"+ "cost_usd": 0.125,+ "at": "2026-11-17T22:42:16" }, "datasheet": { "url": "https://www.ti.com/lit/ds/symlink/pcm2906c.pdf", "pages": 34, "sha256": "62824baa1014b78d",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "Texas Instruments datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -286,7 +287,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -304,13 +305,13 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "4063f533d1ff5bddb37ba812d14959f6414ed8eda354ebf069987bb09e8fa296",- "checked": "2026-11-13",+ "sha256": "640a6da1b0b848b3f0a142d26732439d3397c9ae7228343e2ae5dbfe360de6eb",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "DB0028A",+ "package_code": "DB (SSOP-28, DB0028A)", "source_page": 31, "D": { "nom_mm": 10.2,
page.json+43−40@@ -4,7 +4,7 @@ "slug": "pcm2906cdbr", "title": "PCM2906CDBR", "brief": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.2",+ "version": "0.1.3", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "595-PCM2906CDBR" }, "distributor_check": {- "checked_at": "2026-11-13T01:44:13Z",+ "checked_at": "2026-11-17T22:42:55Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-PCM2906CDBRTR-ND",@@ -52,169 +52,169 @@ "number": "1", "name": "D+", "type": "bidirectional",- "description": "USB full-speed differential data line (plus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V."+ "description": "USB differential data plus line, LV-TTL level, carrying control and audio data at full speed." }, { "number": "2", "name": "D–", "type": "bidirectional",- "description": "USB full-speed differential data line (minus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V."+ "description": "USB differential data minus line, LV-TTL level, carrying control and audio data at full speed." }, { "number": "3", "name": "VBUS", "type": "power_in",- "description": "Connects to USB bus power (VBUS), with a 4.35 V to 5.25 V operating range (5 V typical) and an absolute maximum of 6.5 V."+ "description": "Connect to USB bus power; VBUS voltage range is 4.35 V to 5.25 V with 5 V typical." }, { "number": "4", "name": "DGNDU", "type": "power_in",- "description": "Digital ground for the USB transceiver, with ground voltage differences limited to ±0.1 V."+ "description": "Digital ground for the USB transceiver." }, { "number": "5", "name": "HID0", "type": "input",- "description": "HID key state input for mute, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."+ "description": "Active-high HID key state input for mute; 3.3-V CMOS-level input with internal pulldown." }, { "number": "6", "name": "HID1", "type": "input",- "description": "HID key state input for volume up, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."+ "description": "Active-high HID key state input for volume up; 3.3-V CMOS-level input with internal pulldown." }, { "number": "7", "name": "HID2", "type": "input",- "description": "HID key state input for volume down, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."+ "description": "Active-high HID key state input for volume down; 3.3-V CMOS-level input with internal pulldown." }, { "number": "8", "name": "SEL0", "type": "input",- "description": "Must be set high; TTL Schmitt-trigger input, 5-V tolerant."+ "description": "Must be set to high; TTL Schmitt-trigger input, 5-V tolerant." }, { "number": "9", "name": "SEL1", "type": "input",- "description": "Must be set high; TTL Schmitt-trigger input, 5-V tolerant."+ "description": "Must be set to high; TTL Schmitt-trigger input, 5-V tolerant." }, { "number": "10", "name": "VCCCI", "type": "power_out",- "description": "Internal analog power supply for the codec (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal analog power supply for the codec, 3.1 V to 3.5 V; connect a decoupling capacitor to GND." }, { "number": "11", "name": "AGNDC", "type": "power_in",- "description": "Analog ground for the codec, with ground voltage differences limited to ±0.1 V."+ "description": "Analog ground for the codec." }, { "number": "12", "name": "VINL", "type": "input",- "description": "ADC analog input for the L channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ."+ "description": "ADC analog input for the L channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI." }, { "number": "13", "name": "VINR", "type": "input",- "description": "ADC analog input for the R channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ."+ "description": "ADC analog input for the R channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI." }, { "number": "14", "name": "VCOM",- "type": "passive",- "description": "Common reference for ADC/DAC at VCCCI/2, requires a decoupling capacitor to GND."+ "type": "power_out",+ "description": "Common reference for ADC and DAC at VCCCI/2; connect a decoupling capacitor to GND." }, { "number": "15", "name": "VOUTR", "type": "output",- "description": "DAC analog output for the R channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance."+ "description": "DAC analog output for the R channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling." }, { "number": "16", "name": "VOUTL", "type": "output",- "description": "DAC analog output for the L channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance."+ "description": "DAC analog output for the L channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling." }, { "number": "17", "name": "VCCP1I", "type": "power_out",- "description": "Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal analog power supply for the PLL; connect a decoupling capacitor to GND." }, { "number": "18", "name": "AGNDP", "type": "power_in",- "description": "Analog ground for the PLL, with ground voltage differences limited to ±0.1 V."+ "description": "Analog ground for the PLL." }, { "number": "19", "name": "VCCP2I", "type": "power_out",- "description": "Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal analog power supply for the PLL; connect a decoupling capacitor to GND." }, { "number": "20", "name": "XTO", "type": "output",- "description": "Crystal oscillator output for the 12-MHz resonator; must be left open when an external clock drives XTI."+ "description": "Crystal oscillator output; must be left open when an external 12-MHz clock is supplied to XTI." }, { "number": "21", "name": "XTI", "type": "input",- "description": "Crystal oscillator input or external 12-MHz clock input (11.994 MHz to 12.006 MHz), 3.3-V CMOS level."+ "description": "Crystal oscillator input or external clock input for the 12-MHz (±500 ppm) clock; 3.3-V CMOS-level input." }, { "number": "22", "name": "AGNDX", "type": "power_in",- "description": "Analog ground for the oscillator, with ground voltage differences limited to ±0.1 V."+ "description": "Analog ground for the oscillator." }, { "number": "23", "name": "VCCXI", "type": "power_out",- "description": "Internal analog power supply for the oscillator (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal analog power supply for the oscillator; connect a decoupling capacitor to GND." }, { "number": "24", "name": "DIN", "type": "input",- "description": "S/PDIF input, 3.3-V CMOS level with internal pulldown, 5-V tolerant."+ "description": "S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant." }, { "number": "25", "name": "DOUT", "type": "output",- "description": "S/PDIF output, with VOH of at least 2.8 V and VOL of at most 0.3 V at the specified test loads."+ "description": "S/PDIF output encoded from the USB isochronous-out data." }, { "number": "26", "name": "DGND", "type": "power_in",- "description": "Digital ground, with ground voltage differences limited to ±0.1 V."+ "description": "Digital ground." }, { "number": "27", "name": "VDDI", "type": "power_out",- "description": "Internal digital power supply (3.1 V to 3.5 V), requires a decoupling capacitor to GND."+ "description": "Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND." }, { "number": "28", "name": "SSPND", "type": "output",- "description": "Suspend flag, active-low (low: suspend, high: operational), with VOH of at least 2.8 V and VOL of at most 0.5 V."+ "description": "Suspend flag, active-low output (low: suspend, high: operational), 3.3-V CMOS-level output." } ], "provenance": {@@ -228,17 +228,18 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Datasheet calls these internal supplies (3.1 to 3.5 V) fed from the internal 5-V to 3.3-V regulator,; VCOM is an internal reference node (VCCCI/2) that only needs a decoupling capacitor; typed as passiv; Datasheet gives LV-TTL level and absolute-maximum limits but no separate DC logic thresholds for D+/"+ "extractor flagged: Internal supply and reference pins are typed power_out based on the datasheet describing them as int; The datasheet gives D+ and D– as I/O with LV-TTL level but no explicit voltage limits; they are type; Analog input and output limits (0.6 VCCCI VPP swing, 0.5 VCCCI center voltage) are taken from the el" ], "pages_sent": 34,- "cost_usd": 0.1273,- "at": "2026-11-13T01:43:52"+ "cost_usd": 0.125,+ "at": "2026-11-17T22:42:16" }, "datasheet": { "url": "https://www.ti.com/lit/ds/symlink/pcm2906c.pdf", "pages": 34, "sha256": "62824baa1014b78d",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "Texas Instruments datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -269,7 +270,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -287,13 +288,13 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "4063f533d1ff5bddb37ba812d14959f6414ed8eda354ebf069987bb09e8fa296",- "checked": "2026-11-13",+ "sha256": "640a6da1b0b848b3f0a142d26732439d3397c9ae7228343e2ae5dbfe360de6eb",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "DB0028A",+ "package_code": "DB (SSOP-28, DB0028A)", "source_page": 31, "D": { "nom_mm": 10.2,@@ -1114,5 +1115,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
pcm2906cdbr.kicad_sym+1−1@@ -60,7 +60,7 @@ (name "VINR" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27)))) )- (pin passive line (at -17.78 -17.78 0) (length 5.08)+ (pin power_out line (at -17.78 -17.78 0) (length 5.08) (name "VCOM" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27)))) )
pcm2906cdbr.lbr+1−1@@ -126,7 +126,7 @@ <pin name="AGNDC" x="-17.78" y="-10.16" length="middle" direction="pwr"/> <pin name="VINL" x="-17.78" y="-12.7" length="middle" direction="in"/> <pin name="VINR" x="-17.78" y="-15.24" length="middle" direction="in"/>- <pin name="VCOM" x="-17.78" y="-17.78" length="middle" direction="pas"/>+ <pin name="VCOM" x="-17.78" y="-17.78" length="middle" direction="out"/> <pin name="SSPND" x="17.78" y="15.24" length="middle" direction="out" rot="R180"/> <pin name="VDDI" x="17.78" y="12.7" length="middle" direction="out" rot="R180"/> <pin name="DGND" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/>