Generated by kicad-footprint-generator · KiCad file format 20260206
PCM2906CDBR
Texas Instruments · Audio Interface ICs · SSOP-28
PCM2906CDBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D+ | bidirectional | USB differential data plus line, LV-TTL level, carrying control and audio data at full speed. |
| 2 | D- | bidirectional | USB differential data minus line, LV-TTL level, carrying control and audio data at full speed. |
| 3 | VBUS | power_in | Connect to USB bus power; VBUS voltage range is 4.35 V to 5.25 V with 5 V typical. |
| 4 | DGNDU | power_in | Digital ground for the USB transceiver. |
| 5 | HID0 | input | Active-high HID key state input for mute; 3.3-V CMOS-level input with internal pulldown. |
| 6 | HID1 | input | Active-high HID key state input for volume up; 3.3-V CMOS-level input with internal pulldown. |
| 7 | HID2 | input | Active-high HID key state input for volume down; 3.3-V CMOS-level input with internal pulldown. |
| 8 | SEL0 | input | Must be set to high; TTL Schmitt-trigger input, 5-V tolerant. |
| 9 | SEL1 | input | Must be set to high; TTL Schmitt-trigger input, 5-V tolerant. |
| 10 | VCCCI | power_out | Internal analog power supply for the codec, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |
| 11 | AGNDC | power_in | Analog ground for the codec. |
| 12 | VINL | input | ADC analog input for the L channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI. |
| 13 | VINR | input | ADC analog input for the R channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI. |
| 14 | VCOM | power_out | Common reference for ADC and DAC at VCCCI/2; connect a decoupling capacitor to GND. |
| 15 | VOUTR | output | DAC analog output for the R channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling. |
| 16 | VOUTL | output | DAC analog output for the L channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling. |
| 17 | VCCP1I | power_out | Internal analog power supply for the PLL; connect a decoupling capacitor to GND. |
| 18 | AGNDP | power_in | Analog ground for the PLL. |
| 19 | VCCP2I | power_out | Internal analog power supply for the PLL; connect a decoupling capacitor to GND. |
| 20 | XTO | output | Crystal oscillator output; must be left open when an external 12-MHz clock is supplied to XTI. |
| 21 | XTI | input | Crystal oscillator input or external clock input for the 12-MHz (±500 ppm) clock; 3.3-V CMOS-level input. |
| 22 | AGNDX | power_in | Analog ground for the oscillator. |
| 23 | VCCXI | power_out | Internal analog power supply for the oscillator; connect a decoupling capacitor to GND. |
| 24 | DIN | input | S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant. |
| 25 | DOUT | output | S/PDIF output encoded from the USB isochronous-out data. |
| 26 | DGND | power_in | Digital ground. |
| 27 | VDDI | power_out | Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |
| 28 | SSPND | output | Suspend flag, active-low output (low: suspend, high: operational), 3.3-V CMOS-level output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28 |
| Category | Interface ICs |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VBUS | VBUS | -0.3 | 6.5 | V | 2 | ||
| Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU | -0.1 | 0.1 | V | 2 | |||
| Digital input voltage, SEL0, SEL1, DIN | VI | -0.3 | 6.5 | V | 2 | ||
| Digital input voltage, D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND | VI | -0.3 | 4 | V | Max printed as (VDDI + 0.3) < 4 | 2 | |
| Analog input voltage, VINL, VINR, VCOM, VOUTR, VOUTL | VI | -0.3 | 4 | V | Max printed as (VCCCI + 0.3) < 4 | 2 | |
| Supply voltage, VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI | -0.3 | 4 | V | 2 | |||
| Input current (any pins except supplies) | II | -10 | 10 | mA | 2 | ||
| Ambient temperature under bias | TA | -40 | 125 | °C | 2 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 2 | ||
| Junction temperature | TJ | 150 | °C | 2 | |||
| Lead temperature (soldering, 5 s) | 260 | °C | 5 s | 2 | |||
| Package temperature (IR reflow, peak) | 250 | °C | 2 | ||||
| VBUS voltage range | VBUS | 4.35 | 5 | 5.25 | V | 5 | |
| Operating temperature range | TA | -25 | 85 | °C | 5 | ||
| Internal power-supply voltage | 3.1 | 3.3 | 3.5 | V | Pins 10, 17, 19, 23, 27 | 5 | |
| Supply current, ADC, DAC operation | 56 | 67 | mA | ADC, DAC operation | 5 | ||
| Supply current, suspend mode | 250 | μA | Suspend mode, in USB suspend state | 5 | |||
| Power dissipation, ADC, DAC operation | PD | 280 | 352 | mW | ADC, DAC operation | 5 | |
| Power dissipation, suspend mode | PD | 1.25 | mW | Suspend mode, in USB suspend state | 5 | ||
| Input logic level, high (pins 1, 2) | VIH | 2 | 3.3 | V | Footnote (1); printed as 2 and 3.3 without column label | 3 | |
| Input logic level, low (pins 1, 2) | VIL | 0.8 | V | Footnote (1) | 3 | ||
| Input logic level, high (pins 21, 5, 6, 7) | VIH | 2.52 | 3.3 | V | Footnotes (2)(3) | 3 | |
| Input logic level, low (pins 21, 5, 6, 7) | VIL | 0.9 | V | Footnotes (2)(3) | 3 | ||
| Input logic level, high (pins 8, 9) | VIH | 2 | 5.25 | V | Footnote (4) | 3 | |
| Input logic level, low (pins 8, 9) | VIL | 0.8 | V | Footnote (4) | 3 | ||
| Input logic level, high (pin 24) | VIH | 2.52 | 5.25 | V | Footnote (5) | 3 | |
| Input logic level, low (pin 24) | VIL | 0.9 | V | Footnote (5) | 3 | ||
| Input logic current, high (pins 1, 2, 21, 8, 9) | IIH | -10 | 10 | μA | VIN = 3.3 V | 3 | |
| Input logic current, low (pins 1, 2, 21, 8, 9) | IIL | -10 | 10 | μA | VIN = 0 V | 3 | |
| Input logic current, high (pins 5, 6, 7) | IIH | 50 | 80 | μA | VIN = 3.3 V | 3 | |
| Input logic current, low (pins 5, 6, 7) | IIL | -10 | 10 | μA | VIN = 0 V | 3 | |
| Input logic current, high (pin 24) | IIH | 65 | 100 | μA | VIN = 3.3 V | 3 | |
| Input logic current, low (pin 24) | IIL | -10 | 10 | μA | VIN = 0 V | 3 | |
| Output logic level, high (pin 25) | VOH | 2.8 | V | Footnote (1) | 3 | ||
| Output logic level, low (pin 25) | VOL | 0.3 | V | Footnote (1) | 3 | ||
| Output logic level, low (pin 25) | VOL | 0.5 | V | IOL = 4 mA | 3 | ||
| Output logic level, high (pin 28) | VOH | 2.8 | V | IOH = -2 mA | 3 | ||
| Output logic level, low (pin 28) | VOL | 0.5 | V | IOL = 2 mA | 3 | ||
| Input clock frequency, XTI | fXTI | 11.994 | 12 | 12.006 | MHz | 3 | |
| ADC gain mismatch, channel-to-channel | -5 | 5 | % of FSR | channel-to-channel; printed ±1 typ, ±5 limit | 4 | ||
| ADC gain error | -10 | 10 | % of FSR | 4 | |||
| ADC bipolar zero error | 0 | 0 | % of FSR | 4 | |||
| ADC total harmonic distortion + noise | THD+N | 0.01 | 0.02 | % | VIN = -1 dB, VCCCI = 3.67 V | 4 | |
| ADC total harmonic distortion + noise | THD+N | 0.1 | % | VIN = -1 dB | 4 | ||
| ADC total harmonic distortion + noise | THD+N | 5 | % | VIN = -60 dB | 4 | ||
| ADC dynamic range | 81 | 89 | dB | A-weighted | 4 | ||
| ADC signal-to-noise ratio | SNR | 81 | 89 | dB | A-weighted | 4 | |
| ADC channel separation | 80 | 85 | dB | 4 | |||
| ADC digital filter passband ripple | -0.05 | 0.05 | dB | 4 | |||
| ADC digital filter stop-band attenuation | -65 | dB | 4 | ||||
| DAC gain mismatch, channel-to-channel | -5 | 5 | % of FSR | channel-to-channel; printed ±1 typ, ±5 limit | 5 | ||
| DAC gain error | -10 | 10 | % of FSR | 5 | |||
| DAC bipolar zero error | -2 | 2 | % of FSR | 5 | |||
| DAC total harmonic distortion + noise | THD+N | 0.005 | 0.016 | % | VOUT = 0 dB | 5 | |
| DAC total harmonic distortion + noise | THD+N | 3 | % | VOUT = -60 dB | 5 | ||
| DAC dynamic range | 87 | 93 | dB | EIAJ, A-weighted | 5 | ||
| DAC signal-to-noise ratio | SNR | 90 | 96 | dB | EIAJ, A-weighted | 5 | |
| DAC channel separation | 86 | 92 | dB | 5 | |||
| DAC load impedance | 10 | kΩ | AC coupling | 5 | |||
| DAC digital filter passband ripple | -0.1 | 0.1 | dB | 5 | |||
| DAC digital filter stop-band attenuation | -43 | dB | 5 | ||||
| Thermal resistance, junction-to-ambient (DB SSOP, 28 pins) | θJA | 64.5 | °C/W | 2 | |||
| Thermal resistance, junction-to-case (top) (DB SSOP, 28 pins) | θJCtop | 24.5 | °C/W | 2 | |||
| Thermal resistance, junction-to-board (DB SSOP, 28 pins) | θJB | 25.4 | °C/W | 2 | |||
| Junction-to-top characterization parameter (DB SSOP, 28 pins) | ψJT | 2 | °C/W | 2 | |||
| Junction-to-board characterization parameter (DB SSOP, 28 pins) | ψJB | 25 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
PCM2906CDBR - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files:
pcm2906cdbr-etched.step/pcm2906cdbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcm2906cdbr.step/pcm2906cdbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
62824baa1014b78d, retrieved 2026-11-17) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).