Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCM2906CDBR

Texas Instruments · Audio Interface ICs · SSOP-28

PCM2906CDBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D+ bidirectional USB differential data plus line, LV-TTL level, carrying control and audio data at full speed.
2 D- bidirectional USB differential data minus line, LV-TTL level, carrying control and audio data at full speed.
3 VBUS power_in Connect to USB bus power; VBUS voltage range is 4.35 V to 5.25 V with 5 V typical.
4 DGNDU power_in Digital ground for the USB transceiver.
5 HID0 input Active-high HID key state input for mute; 3.3-V CMOS-level input with internal pulldown.
6 HID1 input Active-high HID key state input for volume up; 3.3-V CMOS-level input with internal pulldown.
7 HID2 input Active-high HID key state input for volume down; 3.3-V CMOS-level input with internal pulldown.
8 SEL0 input Must be set to high; TTL Schmitt-trigger input, 5-V tolerant.
9 SEL1 input Must be set to high; TTL Schmitt-trigger input, 5-V tolerant.
10 VCCCI power_out Internal analog power supply for the codec, 3.1 V to 3.5 V; connect a decoupling capacitor to GND.
11 AGNDC power_in Analog ground for the codec.
12 VINL input ADC analog input for the L channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI.
13 VINR input ADC analog input for the R channel; input voltage 0.6 VCCCI VPP with center voltage 0.5 VCCCI.
14 VCOM power_out Common reference for ADC and DAC at VCCCI/2; connect a decoupling capacitor to GND.
15 VOUTR output DAC analog output for the R channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling.
16 VOUTL output DAC analog output for the L channel; output 0.6 VCCCI VPP with center voltage 0.5 VCCCI, load impedance 10 kΩ minimum with AC coupling.
17 VCCP1I power_out Internal analog power supply for the PLL; connect a decoupling capacitor to GND.
18 AGNDP power_in Analog ground for the PLL.
19 VCCP2I power_out Internal analog power supply for the PLL; connect a decoupling capacitor to GND.
20 XTO output Crystal oscillator output; must be left open when an external 12-MHz clock is supplied to XTI.
21 XTI input Crystal oscillator input or external clock input for the 12-MHz (±500 ppm) clock; 3.3-V CMOS-level input.
22 AGNDX power_in Analog ground for the oscillator.
23 VCCXI power_out Internal analog power supply for the oscillator; connect a decoupling capacitor to GND.
24 DIN input S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant.
25 DOUT output S/PDIF output encoded from the USB isochronous-out data.
26 DGND power_in Digital ground.
27 VDDI power_out Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND.
28 SSPND output Suspend flag, active-low output (low: suspend, high: operational), 3.3-V CMOS-level output.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-28
Category Interface ICs
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VBUS VBUS -0.3 6.5 V 2
Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU -0.1 0.1 V 2
Digital input voltage, SEL0, SEL1, DIN VI -0.3 6.5 V 2
Digital input voltage, D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND VI -0.3 4 V Max printed as (VDDI + 0.3) < 4 2
Analog input voltage, VINL, VINR, VCOM, VOUTR, VOUTL VI -0.3 4 V Max printed as (VCCCI + 0.3) < 4 2
Supply voltage, VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI -0.3 4 V 2
Input current (any pins except supplies) II -10 10 mA 2
Ambient temperature under bias TA -40 125 °C 2
Storage temperature Tstg -55 150 °C 2
Junction temperature TJ 150 °C 2
Lead temperature (soldering, 5 s) 260 °C 5 s 2
Package temperature (IR reflow, peak) 250 °C 2
VBUS voltage range VBUS 4.35 5 5.25 V 5
Operating temperature range TA -25 85 °C 5
Internal power-supply voltage 3.1 3.3 3.5 V Pins 10, 17, 19, 23, 27 5
Supply current, ADC, DAC operation 56 67 mA ADC, DAC operation 5
Supply current, suspend mode 250 μA Suspend mode, in USB suspend state 5
Power dissipation, ADC, DAC operation PD 280 352 mW ADC, DAC operation 5
Power dissipation, suspend mode PD 1.25 mW Suspend mode, in USB suspend state 5
Input logic level, high (pins 1, 2) VIH 2 3.3 V Footnote (1); printed as 2 and 3.3 without column label 3
Input logic level, low (pins 1, 2) VIL 0.8 V Footnote (1) 3
Input logic level, high (pins 21, 5, 6, 7) VIH 2.52 3.3 V Footnotes (2)(3) 3
Input logic level, low (pins 21, 5, 6, 7) VIL 0.9 V Footnotes (2)(3) 3
Input logic level, high (pins 8, 9) VIH 2 5.25 V Footnote (4) 3
Input logic level, low (pins 8, 9) VIL 0.8 V Footnote (4) 3
Input logic level, high (pin 24) VIH 2.52 5.25 V Footnote (5) 3
Input logic level, low (pin 24) VIL 0.9 V Footnote (5) 3
Input logic current, high (pins 1, 2, 21, 8, 9) IIH -10 10 μA VIN = 3.3 V 3
Input logic current, low (pins 1, 2, 21, 8, 9) IIL -10 10 μA VIN = 0 V 3
Input logic current, high (pins 5, 6, 7) IIH 50 80 μA VIN = 3.3 V 3
Input logic current, low (pins 5, 6, 7) IIL -10 10 μA VIN = 0 V 3
Input logic current, high (pin 24) IIH 65 100 μA VIN = 3.3 V 3
Input logic current, low (pin 24) IIL -10 10 μA VIN = 0 V 3
Output logic level, high (pin 25) VOH 2.8 V Footnote (1) 3
Output logic level, low (pin 25) VOL 0.3 V Footnote (1) 3
Output logic level, low (pin 25) VOL 0.5 V IOL = 4 mA 3
Output logic level, high (pin 28) VOH 2.8 V IOH = -2 mA 3
Output logic level, low (pin 28) VOL 0.5 V IOL = 2 mA 3
Input clock frequency, XTI fXTI 11.994 12 12.006 MHz 3
ADC gain mismatch, channel-to-channel -5 5 % of FSR channel-to-channel; printed ±1 typ, ±5 limit 4
ADC gain error -10 10 % of FSR 4
ADC bipolar zero error 0 0 % of FSR 4
ADC total harmonic distortion + noise THD+N 0.01 0.02 % VIN = -1 dB, VCCCI = 3.67 V 4
ADC total harmonic distortion + noise THD+N 0.1 % VIN = -1 dB 4
ADC total harmonic distortion + noise THD+N 5 % VIN = -60 dB 4
ADC dynamic range 81 89 dB A-weighted 4
ADC signal-to-noise ratio SNR 81 89 dB A-weighted 4
ADC channel separation 80 85 dB 4
ADC digital filter passband ripple -0.05 0.05 dB 4
ADC digital filter stop-band attenuation -65 dB 4
DAC gain mismatch, channel-to-channel -5 5 % of FSR channel-to-channel; printed ±1 typ, ±5 limit 5
DAC gain error -10 10 % of FSR 5
DAC bipolar zero error -2 2 % of FSR 5
DAC total harmonic distortion + noise THD+N 0.005 0.016 % VOUT = 0 dB 5
DAC total harmonic distortion + noise THD+N 3 % VOUT = -60 dB 5
DAC dynamic range 87 93 dB EIAJ, A-weighted 5
DAC signal-to-noise ratio SNR 90 96 dB EIAJ, A-weighted 5
DAC channel separation 86 92 dB 5
DAC load impedance 10 kΩ AC coupling 5
DAC digital filter passband ripple -0.1 0.1 dB 5
DAC digital filter stop-band attenuation -43 dB 5
Thermal resistance, junction-to-ambient (DB SSOP, 28 pins) θJA 64.5 °C/W 2
Thermal resistance, junction-to-case (top) (DB SSOP, 28 pins) θJCtop 24.5 °C/W 2
Thermal resistance, junction-to-board (DB SSOP, 28 pins) θJB 25.4 °C/W 2
Junction-to-top characterization parameter (DB SSOP, 28 pins) ψJT 2 °C/W 2
Junction-to-board characterization parameter (DB SSOP, 28 pins) ψJB 25 °C/W 2

CAD (KiCad official)

  • Symbol: PCM2906CDBR
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: pcm2906cdbr-etched.step / pcm2906cdbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pcm2906cdbr.step / pcm2906cdbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 62824baa1014b78d, retrieved 2026-11-17)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF