main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max3223ecpwr: viewers · Ray
max3223ecpwr-etched.glb max3223ecpwr: factory component page (tier=lcsc) · Ray
max3223ecpwr-etched.step max3223ecpwr: factory component page (tier=lcsc) · Ray
max3223ecpwr-hero.glb max3223ecpwr: hero GLB from the etched model (keeps the MPN mark) · Ray
max3223ecpwr-hero.overlay.json Publish 0.1.0 · Ray
max3223ecpwr.glb Publish 0.1.0 · Ray
max3223ecpwr.kicad_mod Publish 0.1.0 · Ray
max3223ecpwr.kicad_sym Publish 0.1.0 · Ray
max3223ecpwr.lbr Publish 0.1.0 · Ray
max3223ecpwr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MAX3223ECPWR

Texas Instruments · RS232 ICs · TSSOP-20

MAX3223ECPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Receiver enable input: when high, the receiver outputs (ROUT1, ROUT2) are placed in high impedance; input range is 0 V to 5.5 V.
2 C1+ passive Positive terminal of charge-pump capacitor C1, which must be connected per the recommended values (0.1 µF at VCC = 3.3 V; 0.047 µF at VCC = 5 V).
3 V+ power_out Positive charge-pump output rail generated from VCC; absolute maximum is -0.3 V to 7 V and it must be bypassed with a ceramic capacitor as shown in Figure 7-1.
4 C1− passive Negative terminal of charge-pump capacitor C1, which must be connected per the recommended values in Figure 7-1.
5 C2+ passive Positive terminal of charge-pump capacitor C2, which must be connected per the recommended values (0.33 µF at VCC = 5 V; 0.1 µF at VCC = 3.3 V).
6 C2− passive Negative terminal of charge-pump capacitor C2, which must be connected per the recommended values in Figure 7-1.
7 V− power_out Negative charge-pump output rail; absolute maximum is -7 V to 0.3 V and it must be bypassed with a ceramic capacitor as shown in Figure 7-1.
8 DOUT2 output RS-232 driver 2 output with ±15 kV HBM ESD protection; with RL = 3 kΩ to GND it swings to at least ±5 V (VOH/VOL), and the output is high impedance when FORCEOFF is low.
9 RIN2 input RS-232 receiver 2 input with ±15 kV HBM ESD protection; receiver input voltage range is -25 V to 25 V.
10 ROUT2 output CMOS-level receiver 2 output that goes high-impedance when EN is high; VOH is at least VCC - 0.6 V at IOH = -1 mA.
11 INVALID output Output that is high when any receiver input is a valid RS-232 level (above 2.7 V or below -2.7 V, or not held within ±0.3 V for more than 30 µs) and low when no valid signal is detected.
12 DIN2 input Logic input to driver 2 with a control/driver input range of 0 V to 5.5 V and a low-level input maximum of 0.8 V.
13 DIN1 input Logic input to driver 1 with a control/driver input range of 0 V to 5.5 V and a low-level input maximum of 0.8 V.
14 FORCEON input Auto-powerdown control: when low with FORCEOFF high, auto-powerdown is enabled; when high with FORCEOFF high, auto-powerdown is disabled. Input range is 0 V to 5.5 V.
15 ROUT1 output CMOS-level receiver 1 output that goes high-impedance when EN is high; VOH is at least VCC - 0.6 V at IOH = -1 mA.
16 RIN1 input RS-232 receiver 1 input with ±15 kV HBM ESD protection; receiver input voltage range is -25 V to 25 V.
17 DOUT1 output RS-232 driver 1 output with ±15 kV HBM ESD protection; with RL = 3 kΩ to GND it swings to at least ±5 V (VOH/VOL), and the output is high impedance when FORCEOFF is low.
18 GND power_in Network ground and reference for all device voltages.
19 VCC power_in Supply voltage of 3 V to 5.5 V (absolute maximum -0.3 V to 6 V); must be bypassed with at least 1 µF to GND to meet the IEC 61000-4-2 rating.
20 FORCEOFF input Active-low driver shutdown: when low, the device is powered off, the drivers are disabled and outputs are high impedance; input range is 0 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Interface
Pins 20

CAD (KiCad official)

  • Symbol: MAX3223ECPWR
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: max3223ecpwr-etched.step / max3223ecpwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3223ecpwr.step / max3223ecpwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 45ca048c81e9b2a5, retrieved 2026-10-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF