main
Ray
Publish 0.1.0
36cfab4
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267
{
"slug": "max3223ecpwr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments RS232 ICs, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"max3223ecpwr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"max3223ecpwr.kicad_sym",
"max3223ecpwr.kicad_mod",
"max3223ecpwr.glb",
"max3223ecpwr.step",
"max3223ecpwr.lbr",
"docs/hero.png",
"docs/max3223ecpwr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"max3223ecpwr-hero.glb",
"max3223ecpwr-hero.overlay.json"
],
"component": {
"mpn": "MAX3223ECPWR",
"manufacturer": "Texas Instruments",
"package": "TSSOP-20",
"pin_count": 20,
"category": "Interface",
"subcategory": "RS232 ICs",
"datasheet": "https://www.ti.com/cn/lit/gpn/max3223e",
"parts": {
"symbol": "max3223ecpwr.kicad_sym",
"footprint": "max3223ecpwr.kicad_mod",
"model_3d": "max3223ecpwr-hero.glb",
"model_3d_plain": "max3223ecpwr.glb",
"model_3d_step": "max3223ecpwr-etched.step",
"model_3d_step_plain": "max3223ecpwr.step",
"lbr": "max3223ecpwr.lbr"
},
"distributor_links": {
"lcsc": "C2867817",
"digikey": "296-19840-2-ND",
"mouser": "595-MAX3223ECPWR"
},
"distributor_check": {
"checked_at": "2026-10-11T22:43:24Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-19840-2-ND",
"status": "found",
"lifecycle": "Obsolete"
},
"mouser": {
"pn": "595-MAX3223ECPWR",
"status": "found",
"lifecycle": "Obsolete"
}
},
"pins": [
{
"number": "1",
"name": "EN",
"type": "input",
"description": "Receiver enable input: when high, the receiver outputs (ROUT1, ROUT2) are placed in high impedance; input range is 0 V to 5.5 V."
},
{
"number": "2",
"name": "C1+",
"type": "passive",
"description": "Positive terminal of charge-pump capacitor C1, which must be connected per the recommended values (0.1 µF at VCC = 3.3 V; 0.047 µF at VCC = 5 V)."
},
{
"number": "3",
"name": "V+",
"type": "power_out",
"description": "Positive charge-pump output rail generated from VCC; absolute maximum is -0.3 V to 7 V and it must be bypassed with a ceramic capacitor as shown in Figure 7-1."
},
{
"number": "4",
"name": "C1−",
"type": "passive",
"description": "Negative terminal of charge-pump capacitor C1, which must be connected per the recommended values in Figure 7-1."
},
{
"number": "5",
"name": "C2+",
"type": "passive",
"description": "Positive terminal of charge-pump capacitor C2, which must be connected per the recommended values (0.33 µF at VCC = 5 V; 0.1 µF at VCC = 3.3 V)."
},
{
"number": "6",
"name": "C2−",
"type": "passive",
"description": "Negative terminal of charge-pump capacitor C2, which must be connected per the recommended values in Figure 7-1."
},
{
"number": "7",
"name": "V−",
"type": "power_out",
"description": "Negative charge-pump output rail; absolute maximum is -7 V to 0.3 V and it must be bypassed with a ceramic capacitor as shown in Figure 7-1."
},
{
"number": "8",
"name": "DOUT2",
"type": "output",
"description": "RS-232 driver 2 output with ±15 kV HBM ESD protection; with RL = 3 kΩ to GND it swings to at least ±5 V (VOH/VOL), and the output is high impedance when FORCEOFF is low."
},
{
"number": "9",
"name": "RIN2",
"type": "input",
"description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection; receiver input voltage range is -25 V to 25 V."
},
{
"number": "10",
"name": "ROUT2",
"type": "output",
"description": "CMOS-level receiver 2 output that goes high-impedance when EN is high; VOH is at least VCC - 0.6 V at IOH = -1 mA."
},
{
"number": "11",
"name": "INVALID",
"type": "output",
"description": "Output that is high when any receiver input is a valid RS-232 level (above 2.7 V or below -2.7 V, or not held within ±0.3 V for more than 30 µs) and low when no valid signal is detected."
},
{
"number": "12",
"name": "DIN2",
"type": "input",
"description": "Logic input to driver 2 with a control/driver input range of 0 V to 5.5 V and a low-level input maximum of 0.8 V."
},
{
"number": "13",
"name": "DIN1",
"type": "input",
"description": "Logic input to driver 1 with a control/driver input range of 0 V to 5.5 V and a low-level input maximum of 0.8 V."
},
{
"number": "14",
"name": "FORCEON",
"type": "input",
"description": "Auto-powerdown control: when low with FORCEOFF high, auto-powerdown is enabled; when high with FORCEOFF high, auto-powerdown is disabled. Input range is 0 V to 5.5 V."
},
{
"number": "15",
"name": "ROUT1",
"type": "output",
"description": "CMOS-level receiver 1 output that goes high-impedance when EN is high; VOH is at least VCC - 0.6 V at IOH = -1 mA."
},
{
"number": "16",
"name": "RIN1",
"type": "input",
"description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection; receiver input voltage range is -25 V to 25 V."
},
{
"number": "17",
"name": "DOUT1",
"type": "output",
"description": "RS-232 driver 1 output with ±15 kV HBM ESD protection; with RL = 3 kΩ to GND it swings to at least ±5 V (VOH/VOL), and the output is high impedance when FORCEOFF is low."
},
{
"number": "18",
"name": "GND",
"type": "power_in",
"description": "Network ground and reference for all device voltages."
},
{
"number": "19",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage of 3 V to 5.5 V (absolute maximum -0.3 V to 6 V); must be bypassed with at least 1 µF to GND to meet the IEC 61000-4-2 rating."
},
{
"number": "20",
"name": "FORCEOFF",
"type": "input",
"description": "Active-low driver shutdown: when low, the device is powered off, the drivers are disabled and outputs are high impedance; input range is 0 V to 5.5 V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin numbers were taken from the 'DB, DW, OR PW PACKAGE (TOP VIEW)' diagram on page 1; the datasheet ; Package addendum (page 14) lists MAX3223ECPWR as TSSOP (PW), 20 pins, 0 to 70 °C, but its status is ; Pin 11 through pin 20 were assigned from the right-hand column of the top-view diagram (numbered 20 "
],
"pages_sent": 28,
"cost_usd": 0.1108,
"at": "2026-10-11T22:43:06"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/max3223e",
"pages": 28,
"sha256": "45ca048c81e9b2a5",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 20,
"described": 20,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "max3223ecpwr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.2
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
"checked": "2026-10-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "max3223ecpwr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.2
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f48ed1676ad6c399f0bf0543b71c8b05ad9d4ac20cd03b7ce149663e10357a4e",
"checked": "2026-10-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}