main
Ray Set visibility: public 16519f8
{
  "schema_version": 1,
  "type": "component",
  "slug": "max3223ecpwr",
  "title": "MAX3223ECPWR",
  "brief": "Texas Instruments RS232 ICs, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "max3223ecpwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MAX3223ECPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/max3223e",
    "parts": {
      "symbol": "max3223ecpwr.kicad_sym",
      "footprint": "max3223ecpwr.kicad_mod",
      "model_3d": "max3223ecpwr-hero.glb",
      "model_3d_plain": "max3223ecpwr.glb",
      "model_3d_step": "max3223ecpwr-etched.step",
      "model_3d_step_plain": "max3223ecpwr.step",
      "lbr": "max3223ecpwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2867817",
      "digikey": "296-19840-2-ND",
      "mouser": "595-MAX3223ECPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T22:43:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-19840-2-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "595-MAX3223ECPWR",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Receiver enable input: when high, the receiver outputs (ROUT1, ROUT2) are placed in high impedance; input range is 0 V to 5.5 V."
      },
      {
        "number": "2",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of charge-pump capacitor C1, which must be connected per the recommended values (0.1 µF at VCC = 3.3 V; 0.047 µF at VCC = 5 V)."
      },
      {
        "number": "3",
        "name": "V+",
        "type": "power_out",
        "description": "Positive charge-pump output rail generated from VCC; absolute maximum is -0.3 V to 7 V and it must be bypassed with a ceramic capacitor as shown in Figure 7-1."
      },
      {
        "number": "4",
        "name": "C1−",
        "type": "passive",
        "description": "Negative terminal of charge-pump capacitor C1, which must be connected per the recommended values in Figure 7-1."
      },
      {
        "number": "5",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of charge-pump capacitor C2, which must be connected per the recommended values (0.33 µF at VCC = 5 V; 0.1 µF at VCC = 3.3 V)."
      },
      {
        "number": "6",
        "name": "C2−",
        "type": "passive",
        "description": "Negative terminal of charge-pump capacitor C2, which must be connected per the recommended values in Figure 7-1."
      },
      {
        "number": "7",
        "name": "V−",
        "type": "power_out",
        "description": "Negative charge-pump output rail; absolute maximum is -7 V to 0.3 V and it must be bypassed with a ceramic capacitor as shown in Figure 7-1."
      },
      {
        "number": "8",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection; with RL = 3 kΩ to GND it swings to at least ±5 V (VOH/VOL), and the output is high impedance when FORCEOFF is low."
      },
      {
        "number": "9",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection; receiver input voltage range is -25 V to 25 V."
      },
      {
        "number": "10",
        "name": "ROUT2",
        "type": "output",
        "description": "CMOS-level receiver 2 output that goes high-impedance when EN is high; VOH is at least VCC - 0.6 V at IOH = -1 mA."
      },
      {
        "number": "11",
        "name": "INVALID",
        "type": "output",
        "description": "Output that is high when any receiver input is a valid RS-232 level (above 2.7 V or below -2.7 V, or not held within ±0.3 V for more than 30 µs) and low when no valid signal is detected."
      },
      {
        "number": "12",
        "name": "DIN2",
        "type": "input",
        "description": "Logic input to driver 2 with a control/driver input range of 0 V to 5.5 V and a low-level input maximum of 0.8 V."
      },
      {
        "number": "13",
        "name": "DIN1",
        "type": "input",
        "description": "Logic input to driver 1 with a control/driver input range of 0 V to 5.5 V and a low-level input maximum of 0.8 V."
      },
      {
        "number": "14",
        "name": "FORCEON",
        "type": "input",
        "description": "Auto-powerdown control: when low with FORCEOFF high, auto-powerdown is enabled; when high with FORCEOFF high, auto-powerdown is disabled. Input range is 0 V to 5.5 V."
      },
      {
        "number": "15",
        "name": "ROUT1",
        "type": "output",
        "description": "CMOS-level receiver 1 output that goes high-impedance when EN is high; VOH is at least VCC - 0.6 V at IOH = -1 mA."
      },
      {
        "number": "16",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection; receiver input voltage range is -25 V to 25 V."
      },
      {
        "number": "17",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection; with RL = 3 kΩ to GND it swings to at least ±5 V (VOH/VOL), and the output is high impedance when FORCEOFF is low."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Network ground and reference for all device voltages."
      },
      {
        "number": "19",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage of 3 V to 5.5 V (absolute maximum -0.3 V to 6 V); must be bypassed with at least 1 µF to GND to meet the IEC 61000-4-2 rating."
      },
      {
        "number": "20",
        "name": "FORCEOFF",
        "type": "input",
        "description": "Active-low driver shutdown: when low, the device is powered off, the drivers are disabled and outputs are high impedance; input range is 0 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers were taken from the 'DB, DW, OR PW PACKAGE (TOP VIEW)' diagram on page 1; the datasheet ; Package addendum (page 14) lists MAX3223ECPWR as TSSOP (PW), 20 pins, 0 to 70 °C, but its status is ; Pin 11 through pin 20 were assigned from the right-hand column of the top-view diagram (numbered 20 "
        ],
        "pages_sent": 28,
        "cost_usd": 0.1108,
        "at": "2026-10-11T22:43:06"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/max3223e",
        "pages": 28,
        "sha256": "45ca048c81e9b2a5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max3223ecpwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max3223ecpwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f48ed1676ad6c399f0bf0543b71c8b05ad9d4ac20cd03b7ce149663e10357a4e",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-20",
      "Category": "Interface",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "max3223ecpwr"
  ],
  "discovery_pitch": "MAX3223ECPWR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max3223ecpwr.kicad_sym",
    "max3223ecpwr.kicad_mod",
    "max3223ecpwr.glb",
    "max3223ecpwr.step",
    "max3223ecpwr.lbr",
    "docs/hero.png",
    "docs/max3223ecpwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max3223ecpwr-hero.glb",
    "max3223ecpwr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}