main
Ray
Publish 0.1.1
ffa551a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229
{
"slug": "ilc556dt",
"version": "0.1.1",
"type": "component",
"description": "IKSEMICON Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"clock and timing",
"ilc556dt",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ilc556dt.kicad_sym",
"ilc556dt.kicad_mod",
"ilc556dt.glb",
"ilc556dt.step",
"ilc556dt.lbr",
"docs/hero.png",
"docs/ilc556dt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ilc556dt-hero.glb",
"ilc556dt-hero.overlay.json",
"ilc556dt-etched.glb"
],
"component": {
"mpn": "ILC556DT",
"manufacturer": "IKSEMICON",
"package": "SOP-14",
"pin_count": 14,
"category": "Clock and Timing",
"subcategory": "Timers / Clock Oscillators",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0583f0690589d0ef593319aa12c853d4.pdf",
"parts": {
"symbol": "ilc556dt.kicad_sym",
"footprint": "ilc556dt.kicad_mod",
"model_3d": "ilc556dt-hero.glb",
"model_3d_plain": "ilc556dt-etched.glb",
"model_3d_step": "ilc556dt-etched.step",
"model_3d_step_plain": "ilc556dt.step",
"lbr": "ilc556dt.lbr"
},
"distributor_links": {
"lcsc": "C439993"
},
"distributor_check": {
"checked_at": "2026-11-11T02:10:41Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "DISCHARGE1",
"type": "passive",
"description": "Discharge output of timer 1 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table."
},
{
"number": "2",
"name": "THRESHOLD1",
"type": "input",
"description": "Threshold comparator input of timer 1, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW."
},
{
"number": "3",
"name": "CONTROL VOLTAGE1",
"type": "passive",
"description": "Control voltage pin of timer 1 that sets the internal comparator reference, and it requires no decoupling capacitor."
},
{
"number": "4",
"name": "RESET1",
"type": "input",
"description": "Active-low reset input of timer 1 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V."
},
{
"number": "5",
"name": "OUTPUT1",
"type": "output",
"description": "Output of timer 1 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads."
},
{
"number": "6",
"name": "TRIGGER1",
"type": "input",
"description": "Active-low trigger input of timer 1 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Ground reference of the device."
},
{
"number": "8",
"name": "TRIGGER2",
"type": "input",
"description": "Active-low trigger input of timer 2 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V."
},
{
"number": "9",
"name": "OUTPUT2",
"type": "output",
"description": "Output of timer 2 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads."
},
{
"number": "10",
"name": "RESET2",
"type": "input",
"description": "Active-low reset input of timer 2 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V."
},
{
"number": "11",
"name": "CONTROL VOLTAGE2",
"type": "passive",
"description": "Control voltage pin of timer 2 that sets the internal comparator reference, and it requires no decoupling capacitor."
},
{
"number": "12",
"name": "THRESHOLD2",
"type": "input",
"description": "Threshold comparator input of timer 2, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW."
},
{
"number": "13",
"name": "DISCHARGE2",
"type": "passive",
"description": "Discharge output of timer 2 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table."
},
{
"number": "14",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage pin; the recommended supply range is 2.0 V to 18.0 V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin-configuration figure text on page 1 is garbled by text extraction. Pin numbers were assigned; The datasheet gives no separate SOP-14 pin drawing. The ordering table lists ILC556D and ILC556DT as; KiCad pin types for DISCHARGE and CONTROL VOLTAGE pins were chosen as passive because the datasheet ",
"2/14 pins cited to the wrong page (name found elsewhere): ['7:GND@p1', '9:OUTPUT2@p1']"
],
"pages_sent": 5,
"cost_usd": 0.0366,
"at": "2026-11-11T02:10:22"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/0583f0690589d0ef593319aa12c853d4.pdf",
"pages": 5,
"sha256": "2c9e6e1558679ebb",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 14,
"described": 14,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ilc556dt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
8.7,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ilc556dt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
8.7,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "01d6d5491e16902bd7a837f2614203d3c85f8435bb5fa3fb164ae70233ee237d",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}