← Commit history
README.md+29−30
@@ -8,20 +8,20 @@ ILC556DT from IKSEMICON, in a SOP-14. Pinout and pin descriptions extracted from  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | DISCHARGE1 | output | Timer 1 discharge output, switched ON when OUTPUT1 is low and OFF when OUTPUT1 is high per the truth table. |-| 2 | THRESHOLD1 | input | Timer 1 threshold comparator input that switches at about 2/3 VCC; input voltage range is -0.3 V to VCC+0.3 V. |-| 3 | CONTROL VOLTAGE1 | input | Timer 1 control voltage node, which does not require capacitor decoupling and sits at about 0.65-0.69 VCC typical at 25 °C with VCC = 5 V. |-| 4 | RESET1 | input | Timer 1 active-low reset input that forces OUTPUT1 low and DISCHARGE1 ON; input range -0.3 V to VCC+0.3 V. |-| 5 | OUTPUT1 | output | Timer 1 output that sources and sinks up to 20 mA recommended (100 mA maximum rating) and is compatible with TTL and CMOS loads. |-| 6 | TRIGGER1 | input | Timer 1 active-low trigger input that sets OUTPUT1 high when below 1/3 VCC; input range -0.3 V to VCC+0.3 V. |-| 7 | GND | power_in | Ground, common to both timers (0 V reference). |-| 8 | TRIGGER2 | input | Timer 2 active-low trigger input that sets OUTPUT2 high when below 1/3 VCC; input range -0.3 V to VCC+0.3 V. |-| 9 | OUTPUT2 | output | Timer 2 output that sources and sinks up to 20 mA recommended (100 mA maximum rating) and is compatible with TTL and CMOS loads. |-| 10 | RESET2 | input | Timer 2 active-low reset input that forces OUTPUT2 low and DISCHARGE2 ON; input range -0.3 V to VCC+0.3 V. |-| 11 | CONTROL VOLTAGE2 | input | Timer 2 control voltage node, which does not require capacitor decoupling and sits at about 0.65-0.69 VCC typical at 25 °C with VCC = 5 V. |-| 12 | THRESHOLD2 | input | Timer 2 threshold comparator input that switches at about 2/3 VCC; input voltage range is -0.3 V to VCC+0.3 V. |-| 13 | DISCHARGE2 | output | Timer 2 discharge output, switched ON when OUTPUT2 is low and OFF when OUTPUT2 is high per the truth table. |-| 14 | VCC | power_in | Positive supply, recommended 2.0 V to 18.0 V (absolute maximum 18.0 V), supply current not more than 600 µA. |+| 1 | DISCHARGE1 | passive | Discharge output of timer 1 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table. |+| 2 | THRESHOLD1 | input | Threshold comparator input of timer 1, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW. |+| 3 | CONTROL VOLTAGE1 | passive | Control voltage pin of timer 1 that sets the internal comparator reference, and it requires no decoupling capacitor. |+| 4 | RESET1 | input | Active-low reset input of timer 1 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V. |+| 5 | OUTPUT1 | output | Output of timer 1 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads. |+| 6 | TRIGGER1 | input | Active-low trigger input of timer 1 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V. |+| 7 | GND | power_in | Ground reference of the device. |+| 8 | TRIGGER2 | input | Active-low trigger input of timer 2 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V. |+| 9 | OUTPUT2 | output | Output of timer 2 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads. |+| 10 | RESET2 | input | Active-low reset input of timer 2 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V. |+| 11 | CONTROL VOLTAGE2 | passive | Control voltage pin of timer 2 that sets the internal comparator reference, and it requires no decoupling capacitor. |+| 12 | THRESHOLD2 | input | Threshold comparator input of timer 2, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW. |+| 13 | DISCHARGE2 | passive | Discharge output of timer 2 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table. |+| 14 | VCC | power_in | Supply voltage pin; the recommended supply range is 2.0 V to 18.0 V. |  ## Key specifications @@ -39,12 +39,12 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---| | Supply voltage | VCC | 2 |  | 18 | V |  | 2 |-| Output current | IO |  |  | 20 | mA |  | 2 |-| Operating temperature | TOPR | -20 |  | 70 | °C |  | 2 | | Supply voltage | VCC | 0 |  | 18 | V |  | 2 |+| Output current | IO |  |  | 20 | mA |  | 2 | | Output current | IO |  |  | 100 | mA |  | 2 |-| Input voltage | VTH, VTRIG, VRST | -0.3 |  |  | V | max printed as VCC+0.3 | 2 |+| Input voltage (VTH, VTRIG, VRST) | VTH, VTRIG, VRST | -0.3 |  |  | V | Printed as VCC+0.3; not a numeric value | 2 | | Power dissipation | PD |  |  | 300 | mW |  | 2 |+| Operating temperature | TOPR | -20 |  | 70 | °C |  | 2 | | Operating temperature | TOPR | -20 |  | 85 | °C |  | 2 | | Storage temperature | TSTG | -65 |  | 150 | °C |  | 2 | | Lead solder temperature | TSOLDER |  |  | 260 | °C | 10 sec max | 2 |@@ -54,7 +54,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Trigger voltage | VTRIG | 0.28 |  | 0.4 | V | VCC, -20 to 70 °C | 3 | | Reset voltage | VRST | 0.4 |  | 1 | V | VCC 2.0 V, 25 °C | 3 | | Reset voltage | VRST | 0.2 |  | 1.5 | V | VCC 2.0 V, -20 to 70 °C | 3 |-| Control voltage | VCV | 0.65 |  | 0.69 | V | 25 °C | 3 |+| Control voltage | VCV | 0.65 |  | 0.69 | V | VCC 5.0 V, 25 °C | 3 | | Control voltage | VCV | 0.6 |  | 0.8 | V | VCC, -20 to 70 °C | 3 | | Output voltage LOW | VOL |  |  | 0.4 | V | IOL = 3.2 mA, VCC 5.0 V, 25 °C | 3 | | Output voltage LOW | VOL |  |  | 1 | V | IOL = 20 mA, VCC 15.0 V, 25 °C | 3 |@@ -63,21 +63,20 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Output voltage HIGH | VOH | 4 |  |  | V | VCC 5.0 V, 25 °C | 3 | | Output voltage HIGH | VOH | 14.3 |  |  | V | IOH = -0.8 mA, VCC 15.0 V, 25 °C | 3 | | Output voltage HIGH | VOH | 3.5 |  |  | V | VCC 5.0 V, -20 to 70 °C | 3 |-| Output voltage HIGH | VOH | 14 |  |  | V | VCC 15.0 V, -20 to 70 °C | 3 |-| Supply current | ICC |  |  | 400 | µA | VCC 2.0 V, 25 °C | 3 |-| Supply current | ICC |  |  | 600 | µA | VCC 18.0 V, 25 °C | 3 |-| Supply current | ICC |  |  | 800 | µA | VCC 2.0 V, -20 to 70 °C | 3 |-| Supply current | ICC |  |  | 1000 | µA | VCC 18.0 V, -20 to 70 °C | 3 |+| Output voltage HIGH | VOH | 14 |  |  | V | IOH = -0.8 mA, VCC 15.0 V, -20 to 70 °C | 3 |+| Supply current | ICC |  |  | 400 | A | VCC 2.0 V, 25 °C | 3 |+| Supply current | ICC |  |  | 600 | A | VCC 18.0 V, 25 °C | 3 |+| Supply current | ICC |  |  | 800 | A | VCC 2.0 V, -20 to 70 °C | 3 |+| Supply current | ICC |  |  | 1000 | A | VCC 18.0 V, -20 to 70 °C | 3 | | Clock rise and fall time | tTHL, tTLH |  |  | 75 | ns | RL = 10 MOhm, CL = 10 pF, VCC 5.0 V, 25 °C | 4 | | Clock rise and fall time | tTHL, tTLH |  |  | 150 | ns | RL = 10 MOhm, CL = 10 pF, -20 to 70 °C | 4 | | Maximum oscillation frequency | fMAX |  |  | 500 | kHz | Monostable mode, VCC 2.0 V, 25 °C | 4 | | Maximum oscillation frequency | fMAX |  |  | 200 | kHz | Monostable mode, VCC 18.0 V, -20 to 70 °C | 4 |-| Initial frequency |  |  |  | 5 | % |  | 4 |-| Oscillation frequency temperature ratio | f |  |  | 0.02 | %/°C | RL = 1 - 100 kOhm, CL = 0.1 µF, VCC 5.0 V, -20 to 70 °C | 4 |-| Oscillation frequency temperature ratio | f |  |  | 0.03 | %/°C | RL = 1 - 100 kOhm, CL = 0.1 µF, VCC 10.0 V | 4 |-| Oscillation frequency temperature ratio | f |  |  | 0.06 | %/°C | RL = 1 - 100 kOhm, CL = 0.1 µF, VCC 15.0 V | 4 |+| Oscillation frequency temperature ratio | f |  |  | 0.02 | %/°C | RL = 1-100 kOhm, CL = 0.1 F, VCC 5.0 V, -20 to 70 °C | 4 |+| Oscillation frequency temperature ratio | f |  |  | 0.03 | %/°C | RL = 1-100 kOhm, CL = 0.1 F, VCC 10.0 V | 4 |+| Oscillation frequency temperature ratio | f |  |  | 0.06 | %/°C | RL = 1-100 kOhm, CL = 0.1 F, VCC 15.0 V | 4 | | Oscillation frequency instability | f |  |  | 3 | %/V | VCC 5.0 V, 25 °C | 4 |-| Oscillation frequency instability | f |  |  | 6 | %/V | -20 to 70 °C | 4 |+| Oscillation frequency instability | f |  |  | 6 | %/V | VCC 5.0 V, -20 to 70 °C | 4 |  ## CAD (KiCad official) @@ -90,8 +89,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [IKSEMICON datasheet](docs/ilc556dt-datasheet.pdf) (5 pp, sha256 `2c9e6e1558679ebb`, retrieved 2026-11-10, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [IKSEMICON datasheet](docs/ilc556dt-datasheet.pdf) (5 pp, sha256 `2c9e6e1558679ebb`, retrieved 2026-11-11, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/ilc556dt-datasheet.pdf)
ilc556dt-hero.overlay.json+390−388
@@ -1,392 +1,394 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "ILC556DT",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 14,-      "span_mm": 8.22,-      "dash_mm": 0.2055,-      "gap_mm": 0.1233,-      "pad_stroke_mm": 0.0493-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 14,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "ILC556DT",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 14,+   "span_mm": 8.22,+   "dash_mm": 0.2055,+   "gap_mm": 0.1233,+   "pad_stroke_mm": 0.0493   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.658,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.0,-      3.0,-      -4.015,-      4.015-    ],-    "pads_bbox_mm": [-      -3.45,-      3.45,-      -4.11,-      4.11-    ],-    "seating_z_mm": -0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "ilc556dt-etched.glb",-    "glb_sha256": "8ebe848154077eaa4f025759cfbcfe04c7f7e5a5442a84ea8506e263e7811b22",-    "footprint": "ilc556dt.kicad_mod",-    "footprint_sha256": "a885b619b22880c9559522d2bf865b059d80453b95a98defc9e6ceef284da1fc",-    "pins": "page.json component.pins",-    "pins_sha256": "a3ab4a27209ae8a5fc276f242454908d3693f8d170bf36d824034896f7f3a487"-  },-  "generator": "adom-wiki 1.8.15 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "DISCHARGE1",-      "x": -3.6,-      "y": -3.81,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "THRESHOLD1",-      "x": -3.6,-      "y": -2.54,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "CONTROL VOLTAGE1",-      "x": -3.6,-      "y": -1.27,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "RESET1",-      "x": -3.6,-      "y": 0.0,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "OUTPUT1",-      "x": -3.6,-      "y": 1.27,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "TRIGGER1",-      "x": -3.6,-      "y": 2.54,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "GND",-      "x": -3.6,-      "y": 3.81,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "TRIGGER2",-      "x": 3.6,-      "y": 3.81,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "OUTPUT2",-      "x": 3.6,-      "y": 2.54,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "RESET2",-      "x": 3.6,-      "y": 1.27,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "CONTROL VOLTAGE2",-      "x": 3.6,-      "y": 0.0,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "THRESHOLD2",-      "x": 3.6,-      "y": -1.27,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "DISCHARGE2",-      "x": 3.6,-      "y": -2.54,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "VCC",-      "x": 3.6,-      "y": -3.81,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 14,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.658,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.0,+   3.0,+   -4.015,+   4.015+  ],+  "pads_bbox_mm": [+   -3.45,+   3.45,+   -4.11,+   4.11   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -3.81-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -2.54-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -1.27-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        0.0-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        1.27-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        2.54-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        3.81-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        3.81-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        2.54-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        1.27-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        0.0-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -1.27-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -2.54-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -3.81-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": -0.0+ },+ "sources": {+  "glb": "ilc556dt-etched.glb",+  "glb_sha256": "8ebe848154077eaa4f025759cfbcfe04c7f7e5a5442a84ea8506e263e7811b22",+  "footprint": "ilc556dt.kicad_mod",+  "footprint_sha256": "a885b619b22880c9559522d2bf865b059d80453b95a98defc9e6ceef284da1fc",+  "pins": "page.json component.pins",+  "pins_sha256": "a3ab4a27209ae8a5fc276f242454908d3693f8d170bf36d824034896f7f3a487"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "DISCHARGE1",+   "x": -3.6,+   "y": -3.81,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "THRESHOLD1",+   "x": -3.6,+   "y": -2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "CONTROL VOLTAGE1",+   "x": -3.6,+   "y": -1.27,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "RESET1",+   "x": -3.6,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "OUTPUT1",+   "x": -3.6,+   "y": 1.27,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "TRIGGER1",+   "x": -3.6,+   "y": 2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "GND",+   "x": -3.6,+   "y": 3.81,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "TRIGGER2",+   "x": 3.6,+   "y": 3.81,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "OUTPUT2",+   "x": 3.6,+   "y": 2.54,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "RESET2",+   "x": 3.6,+   "y": 1.27,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "CONTROL VOLTAGE2",+   "x": 3.6,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "THRESHOLD2",+   "x": 3.6,+   "y": -1.27,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "DISCHARGE2",+   "x": 3.6,+   "y": -2.54,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "VCC",+   "x": 3.6,+   "y": -3.81,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -3.81+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -2.54+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -1.27+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    0.0+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    1.27+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    2.54+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    3.81+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    3.81+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    2.54+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    1.27+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    0.0+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -1.27+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -2.54+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -3.81+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
ilc556dt.kicad_sym+4−4
@@ -8,7 +8,7 @@       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "ILC556DT_1_1"-    (pin output line (at -22.86 7.62 0) (length 5.08)+    (pin passive line (at -22.86 7.62 0) (length 5.08)       (name "DISCHARGE1" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )@@ -16,7 +16,7 @@       (name "THRESHOLD1" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin input line (at -22.86 2.54 0) (length 5.08)+    (pin passive line (at -22.86 2.54 0) (length 5.08)       (name "CONTROL VOLTAGE1" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )@@ -40,7 +40,7 @@       (name "VCC" (effects (font (size 1.27 1.27))))       (number "14" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 22.86 5.08 180) (length 5.08)+    (pin passive line (at 22.86 5.08 180) (length 5.08)       (name "DISCHARGE2" (effects (font (size 1.27 1.27))))       (number "13" (effects (font (size 1.27 1.27))))     )@@ -48,7 +48,7 @@       (name "THRESHOLD2" (effects (font (size 1.27 1.27))))       (number "12" (effects (font (size 1.27 1.27))))     )-    (pin input line (at 22.86 0.00 180) (length 5.08)+    (pin passive line (at 22.86 0.00 180) (length 5.08)       (name "CONTROL VOLTAGE2" (effects (font (size 1.27 1.27))))       (number "11" (effects (font (size 1.27 1.27))))     )
ilc556dt.lbr+16−7
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>IKSEMICON Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-14_3.9x8.7mm_P1.27mm">   <description>SOIC-14, 3.9 x 8.7 mm, 1.27 mm pitch</description>@@ -92,23 +92,24 @@ </packages> <symbols> <symbol name="ILC556DT">+  <description>IKSEMICON Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-17.78" y1="10.16" x2="17.78" y2="10.16" width="0.254" layer="94"/>   <wire x1="17.78" y1="10.16" x2="17.78" y2="-10.16" width="0.254" layer="94"/>   <wire x1="17.78" y1="-10.16" x2="-17.78" y2="-10.16" width="0.254" layer="94"/>   <wire x1="-17.78" y1="-10.16" x2="-17.78" y2="10.16" width="0.254" layer="94"/>   <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-12.7000" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="DISCHARGE1" x="-22.86" y="7.62" length="middle" direction="out"/>+  <pin name="DISCHARGE1" x="-22.86" y="7.62" length="middle" direction="pas"/>   <pin name="THRESHOLD1" x="-22.86" y="5.08" length="middle" direction="in"/>-  <pin name="CONTROL_VOLTAGE1" x="-22.86" y="2.54" length="middle" direction="in"/>+  <pin name="CONTROL_VOLTAGE1" x="-22.86" y="2.54" length="middle" direction="pas"/>   <pin name="RESET1" x="-22.86" y="0" length="middle" direction="in"/>   <pin name="OUTPUT1" x="-22.86" y="-2.54" length="middle" direction="out"/>   <pin name="TRIGGER1" x="-22.86" y="-5.08" length="middle" direction="in"/>   <pin name="GND" x="-22.86" y="-7.62" length="middle" direction="pwr"/>   <pin name="VCC" x="22.86" y="7.62" length="middle" direction="pwr" rot="R180"/>-  <pin name="DISCHARGE2" x="22.86" y="5.08" length="middle" direction="out" rot="R180"/>+  <pin name="DISCHARGE2" x="22.86" y="5.08" length="middle" direction="pas" rot="R180"/>   <pin name="THRESHOLD2" x="22.86" y="2.54" length="middle" direction="in" rot="R180"/>-  <pin name="CONTROL_VOLTAGE2" x="22.86" y="0" length="middle" direction="in" rot="R180"/>+  <pin name="CONTROL_VOLTAGE2" x="22.86" y="0" length="middle" direction="pas" rot="R180"/>   <pin name="RESET2" x="22.86" y="-2.54" length="middle" direction="in" rot="R180"/>   <pin name="OUTPUT2" x="22.86" y="-5.08" length="middle" direction="out" rot="R180"/>   <pin name="TRIGGER2" x="22.86" y="-7.62" length="middle" direction="in" rot="R180"/>@@ -116,7 +117,7 @@ </symbols> <devicesets> <deviceset name="ILC556DT" prefix="U">-  <description></description>+  <description>IKSEMICON Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="ILC556DT" x="0" y="0"/>   </gates>@@ -138,7 +139,15 @@         <connect gate="G$1" pin="OUTPUT2" pad="9"/>         <connect gate="G$1" pin="TRIGGER2" pad="8"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="ILC556DT" constant="no"/>+          <attribute name="MANUFACTURER" value="IKSEMICON" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/0583f0690589d0ef593319aa12c853d4.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ilc556dt" constant="no"/>+          <attribute name="LCSC_PN" value="C439993" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+27−27
@@ -1,6 +1,6 @@ {   "slug": "ilc556dt",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "IKSEMICON Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,7 +52,7 @@       "lcsc": "C439993"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:20:26Z",+      "checked_at": "2026-11-11T02:10:41Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -67,86 +67,86 @@       {         "number": "1",         "name": "DISCHARGE1",-        "type": "output",-        "description": "Timer 1 discharge output, switched ON when OUTPUT1 is low and OFF when OUTPUT1 is high per the truth table."+        "type": "passive",+        "description": "Discharge output of timer 1 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table."       },       {         "number": "2",         "name": "THRESHOLD1",         "type": "input",-        "description": "Timer 1 threshold comparator input that switches at about 2/3 VCC; input voltage range is -0.3 V to VCC+0.3 V."+        "description": "Threshold comparator input of timer 1, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW."       },       {         "number": "3",         "name": "CONTROL VOLTAGE1",-        "type": "input",-        "description": "Timer 1 control voltage node, which does not require capacitor decoupling and sits at about 0.65-0.69 VCC typical at 25 °C with VCC = 5 V."+        "type": "passive",+        "description": "Control voltage pin of timer 1 that sets the internal comparator reference, and it requires no decoupling capacitor."       },       {         "number": "4",         "name": "RESET1",         "type": "input",-        "description": "Timer 1 active-low reset input that forces OUTPUT1 low and DISCHARGE1 ON; input range -0.3 V to VCC+0.3 V."+        "description": "Active-low reset input of timer 1 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V."       },       {         "number": "5",         "name": "OUTPUT1",         "type": "output",-        "description": "Timer 1 output that sources and sinks up to 20 mA recommended (100 mA maximum rating) and is compatible with TTL and CMOS loads."+        "description": "Output of timer 1 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads."       },       {         "number": "6",         "name": "TRIGGER1",         "type": "input",-        "description": "Timer 1 active-low trigger input that sets OUTPUT1 high when below 1/3 VCC; input range -0.3 V to VCC+0.3 V."+        "description": "Active-low trigger input of timer 1 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V."       },       {         "number": "7",         "name": "GND",         "type": "power_in",-        "description": "Ground, common to both timers (0 V reference)."+        "description": "Ground reference of the device."       },       {         "number": "8",         "name": "TRIGGER2",         "type": "input",-        "description": "Timer 2 active-low trigger input that sets OUTPUT2 high when below 1/3 VCC; input range -0.3 V to VCC+0.3 V."+        "description": "Active-low trigger input of timer 2 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V."       },       {         "number": "9",         "name": "OUTPUT2",         "type": "output",-        "description": "Timer 2 output that sources and sinks up to 20 mA recommended (100 mA maximum rating) and is compatible with TTL and CMOS loads."+        "description": "Output of timer 2 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads."       },       {         "number": "10",         "name": "RESET2",         "type": "input",-        "description": "Timer 2 active-low reset input that forces OUTPUT2 low and DISCHARGE2 ON; input range -0.3 V to VCC+0.3 V."+        "description": "Active-low reset input of timer 2 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V."       },       {         "number": "11",         "name": "CONTROL VOLTAGE2",-        "type": "input",-        "description": "Timer 2 control voltage node, which does not require capacitor decoupling and sits at about 0.65-0.69 VCC typical at 25 °C with VCC = 5 V."+        "type": "passive",+        "description": "Control voltage pin of timer 2 that sets the internal comparator reference, and it requires no decoupling capacitor."       },       {         "number": "12",         "name": "THRESHOLD2",         "type": "input",-        "description": "Timer 2 threshold comparator input that switches at about 2/3 VCC; input voltage range is -0.3 V to VCC+0.3 V."+        "description": "Threshold comparator input of timer 2, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW."       },       {         "number": "13",         "name": "DISCHARGE2",-        "type": "output",-        "description": "Timer 2 discharge output, switched ON when OUTPUT2 is low and OFF when OUTPUT2 is high per the truth table."+        "type": "passive",+        "description": "Discharge output of timer 2 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table."       },       {         "number": "14",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply, recommended 2.0 V to 18.0 V (absolute maximum 18.0 V), supply current not more than 600 µA."+        "description": "Supply voltage pin; the recommended supply range is 2.0 V to 18.0 V."       }     ],     "provenance": {@@ -154,18 +154,18 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin positions come from garbled figure text; the order 1..14 was reconstructed from the label sequen; The datasheet does not describe the DISCHARGE pin's electrical structure (open-drain/collector), so ; MPN ILC556DT is the SOP-14 tape and reel variant per the ordering table. The pinout is the same as f",+          "extractor flagged: The pin-configuration figure text on page 1 is garbled by text extraction. Pin numbers were assigned; The datasheet gives no separate SOP-14 pin drawing. The ordering table lists ILC556D and ILC556DT as; KiCad pin types for DISCHARGE and CONTROL VOLTAGE pins were chosen as passive because the datasheet ",           "2/14 pins cited to the wrong page (name found elsewhere): ['7:GND@p1', '9:OUTPUT2@p1']"         ],         "pages_sent": 5,-        "cost_usd": 0.0685,-        "at": "2026-11-10T07:20:14"+        "cost_usd": 0.0366,+        "at": "2026-11-11T02:10:22"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/0583f0690589d0ef593319aa12c853d4.pdf",@@ -202,7 +202,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -220,8 +220,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "0a338879063fcaf3802746ce710acdd678736c4ff7023401b08c9893cc0fef7b",-        "checked": "2026-11-10",+        "sha256": "01d6d5491e16902bd7a837f2614203d3c85f8435bb5fa3fb164ae70233ee237d",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]
page.json+30−28
@@ -4,7 +4,7 @@   "slug": "ilc556dt",   "title": "ILC556DT",   "brief": "IKSEMICON Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C439993"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:20:26Z",+      "checked_at": "2026-11-11T02:10:41Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -49,86 +49,86 @@       {         "number": "1",         "name": "DISCHARGE1",-        "type": "output",-        "description": "Timer 1 discharge output, switched ON when OUTPUT1 is low and OFF when OUTPUT1 is high per the truth table."+        "type": "passive",+        "description": "Discharge output of timer 1 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table."       },       {         "number": "2",         "name": "THRESHOLD1",         "type": "input",-        "description": "Timer 1 threshold comparator input that switches at about 2/3 VCC; input voltage range is -0.3 V to VCC+0.3 V."+        "description": "Threshold comparator input of timer 1, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW."       },       {         "number": "3",         "name": "CONTROL VOLTAGE1",-        "type": "input",-        "description": "Timer 1 control voltage node, which does not require capacitor decoupling and sits at about 0.65-0.69 VCC typical at 25 °C with VCC = 5 V."+        "type": "passive",+        "description": "Control voltage pin of timer 1 that sets the internal comparator reference, and it requires no decoupling capacitor."       },       {         "number": "4",         "name": "RESET1",         "type": "input",-        "description": "Timer 1 active-low reset input that forces OUTPUT1 low and DISCHARGE1 ON; input range -0.3 V to VCC+0.3 V."+        "description": "Active-low reset input of timer 1 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V."       },       {         "number": "5",         "name": "OUTPUT1",         "type": "output",-        "description": "Timer 1 output that sources and sinks up to 20 mA recommended (100 mA maximum rating) and is compatible with TTL and CMOS loads."+        "description": "Output of timer 1 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads."       },       {         "number": "6",         "name": "TRIGGER1",         "type": "input",-        "description": "Timer 1 active-low trigger input that sets OUTPUT1 high when below 1/3 VCC; input range -0.3 V to VCC+0.3 V."+        "description": "Active-low trigger input of timer 1 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V."       },       {         "number": "7",         "name": "GND",         "type": "power_in",-        "description": "Ground, common to both timers (0 V reference)."+        "description": "Ground reference of the device."       },       {         "number": "8",         "name": "TRIGGER2",         "type": "input",-        "description": "Timer 2 active-low trigger input that sets OUTPUT2 high when below 1/3 VCC; input range -0.3 V to VCC+0.3 V."+        "description": "Active-low trigger input of timer 2 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V."       },       {         "number": "9",         "name": "OUTPUT2",         "type": "output",-        "description": "Timer 2 output that sources and sinks up to 20 mA recommended (100 mA maximum rating) and is compatible with TTL and CMOS loads."+        "description": "Output of timer 2 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads."       },       {         "number": "10",         "name": "RESET2",         "type": "input",-        "description": "Timer 2 active-low reset input that forces OUTPUT2 low and DISCHARGE2 ON; input range -0.3 V to VCC+0.3 V."+        "description": "Active-low reset input of timer 2 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V."       },       {         "number": "11",         "name": "CONTROL VOLTAGE2",-        "type": "input",-        "description": "Timer 2 control voltage node, which does not require capacitor decoupling and sits at about 0.65-0.69 VCC typical at 25 °C with VCC = 5 V."+        "type": "passive",+        "description": "Control voltage pin of timer 2 that sets the internal comparator reference, and it requires no decoupling capacitor."       },       {         "number": "12",         "name": "THRESHOLD2",         "type": "input",-        "description": "Timer 2 threshold comparator input that switches at about 2/3 VCC; input voltage range is -0.3 V to VCC+0.3 V."+        "description": "Threshold comparator input of timer 2, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW."       },       {         "number": "13",         "name": "DISCHARGE2",-        "type": "output",-        "description": "Timer 2 discharge output, switched ON when OUTPUT2 is low and OFF when OUTPUT2 is high per the truth table."+        "type": "passive",+        "description": "Discharge output of timer 2 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table."       },       {         "number": "14",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply, recommended 2.0 V to 18.0 V (absolute maximum 18.0 V), supply current not more than 600 µA."+        "description": "Supply voltage pin; the recommended supply range is 2.0 V to 18.0 V."       }     ],     "provenance": {@@ -136,18 +136,18 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin positions come from garbled figure text; the order 1..14 was reconstructed from the label sequen; The datasheet does not describe the DISCHARGE pin's electrical structure (open-drain/collector), so ; MPN ILC556DT is the SOP-14 tape and reel variant per the ordering table. The pinout is the same as f",+          "extractor flagged: The pin-configuration figure text on page 1 is garbled by text extraction. Pin numbers were assigned; The datasheet gives no separate SOP-14 pin drawing. The ordering table lists ILC556D and ILC556DT as; KiCad pin types for DISCHARGE and CONTROL VOLTAGE pins were chosen as passive because the datasheet ",           "2/14 pins cited to the wrong page (name found elsewhere): ['7:GND@p1', '9:OUTPUT2@p1']"         ],         "pages_sent": 5,-        "cost_usd": 0.0685,-        "at": "2026-11-10T07:20:14"+        "cost_usd": 0.0366,+        "at": "2026-11-11T02:10:22"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/0583f0690589d0ef593319aa12c853d4.pdf",@@ -184,7 +184,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -202,8 +202,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "0a338879063fcaf3802746ce710acdd678736c4ff7023401b08c9893cc0fef7b",-        "checked": "2026-11-10",+        "sha256": "01d6d5491e16902bd7a837f2614203d3c85f8435bb5fa3fb164ae70233ee237d",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -742,5 +742,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "IKSEMICON Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file