Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ILC556DT

IKSEMICON · Timers / Clock Oscillators · SOP-14

ILC556DT from IKSEMICON, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DISCHARGE1 passive Discharge output of timer 1 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table.
2 THRESHOLD1 input Threshold comparator input of timer 1, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW.
3 CONTROL VOLTAGE1 passive Control voltage pin of timer 1 that sets the internal comparator reference, and it requires no decoupling capacitor.
4 RESET1 input Active-low reset input of timer 1 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V.
5 OUTPUT1 output Output of timer 1 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads.
6 TRIGGER1 input Active-low trigger input of timer 1 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V.
7 GND power_in Ground reference of the device.
8 TRIGGER2 input Active-low trigger input of timer 2 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V.
9 OUTPUT2 output Output of timer 2 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads.
10 RESET2 input Active-low reset input of timer 2 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V.
11 CONTROL VOLTAGE2 passive Control voltage pin of timer 2 that sets the internal comparator reference, and it requires no decoupling capacitor.
12 THRESHOLD2 input Threshold comparator input of timer 2, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW.
13 DISCHARGE2 passive Discharge output of timer 2 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table.
14 VCC power_in Supply voltage pin; the recommended supply range is 2.0 V to 18.0 V.

Key specifications

Parameter Value
Manufacturer IKSEMICON
Package SOP-14
Category Clock and Timing
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2 18 V 2
Supply voltage VCC 0 18 V 2
Output current IO 20 mA 2
Output current IO 100 mA 2
Input voltage (VTH, VTRIG, VRST) VTH, VTRIG, VRST -0.3 V Printed as VCC+0.3; not a numeric value 2
Power dissipation PD 300 mW 2
Operating temperature TOPR -20 70 °C 2
Operating temperature TOPR -20 85 °C 2
Storage temperature TSTG -65 150 °C 2
Lead solder temperature TSOLDER 260 °C 10 sec max 2
Threshold voltage VTH 0.65 0.7 V VCC 5.0 V, 25 °C 3
Threshold voltage VTH 0.6 0.8 V VCC, -20 to 70 °C 3
Trigger voltage VTRIG 0.31 0.36 V VCC 5.0 V, 25 °C 3
Trigger voltage VTRIG 0.28 0.4 V VCC, -20 to 70 °C 3
Reset voltage VRST 0.4 1 V VCC 2.0 V, 25 °C 3
Reset voltage VRST 0.2 1.5 V VCC 2.0 V, -20 to 70 °C 3
Control voltage VCV 0.65 0.69 V VCC 5.0 V, 25 °C 3
Control voltage VCV 0.6 0.8 V VCC, -20 to 70 °C 3
Output voltage LOW VOL 0.4 V IOL = 3.2 mA, VCC 5.0 V, 25 °C 3
Output voltage LOW VOL 1 V IOL = 20 mA, VCC 15.0 V, 25 °C 3
Output voltage LOW VOL 0.6 V IOL = 3.2 mA, VCC 5.0 V, -20 to 70 °C 3
Output voltage LOW VOL 1.5 V IOL = 20 mA, VCC 15.0 V, -20 to 70 °C 3
Output voltage HIGH VOH 4 V VCC 5.0 V, 25 °C 3
Output voltage HIGH VOH 14.3 V IOH = -0.8 mA, VCC 15.0 V, 25 °C 3
Output voltage HIGH VOH 3.5 V VCC 5.0 V, -20 to 70 °C 3
Output voltage HIGH VOH 14 V IOH = -0.8 mA, VCC 15.0 V, -20 to 70 °C 3
Supply current ICC 400 A VCC 2.0 V, 25 °C 3
Supply current ICC 600 A VCC 18.0 V, 25 °C 3
Supply current ICC 800 A VCC 2.0 V, -20 to 70 °C 3
Supply current ICC 1000 A VCC 18.0 V, -20 to 70 °C 3
Clock rise and fall time tTHL, tTLH 75 ns RL = 10 MOhm, CL = 10 pF, VCC 5.0 V, 25 °C 4
Clock rise and fall time tTHL, tTLH 150 ns RL = 10 MOhm, CL = 10 pF, -20 to 70 °C 4
Maximum oscillation frequency fMAX 500 kHz Monostable mode, VCC 2.0 V, 25 °C 4
Maximum oscillation frequency fMAX 200 kHz Monostable mode, VCC 18.0 V, -20 to 70 °C 4
Oscillation frequency temperature ratio f 0.02 %/°C RL = 1-100 kOhm, CL = 0.1 F, VCC 5.0 V, -20 to 70 °C 4
Oscillation frequency temperature ratio f 0.03 %/°C RL = 1-100 kOhm, CL = 0.1 F, VCC 10.0 V 4
Oscillation frequency temperature ratio f 0.06 %/°C RL = 1-100 kOhm, CL = 0.1 F, VCC 15.0 V 4
Oscillation frequency instability f 3 %/V VCC 5.0 V, 25 °C 4
Oscillation frequency instability f 6 %/V VCC 5.0 V, -20 to 70 °C 4

CAD (KiCad official)

  • Symbol: ILC556DT
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: ilc556dt-etched.step / ilc556dt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ilc556dt.step / ilc556dt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: IKSEMICON datasheet (5 pp, sha256 2c9e6e1558679ebb, retrieved 2026-11-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF