Generated by kicad-footprint-generator · KiCad file format 20260206
ILC556DT
IKSEMICON · Timers / Clock Oscillators · SOP-14
ILC556DT from IKSEMICON, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DISCHARGE1 | passive | Discharge output of timer 1 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table. |
| 2 | THRESHOLD1 | input | Threshold comparator input of timer 1, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW. |
| 3 | CONTROL VOLTAGE1 | passive | Control voltage pin of timer 1 that sets the internal comparator reference, and it requires no decoupling capacitor. |
| 4 | RESET1 | input | Active-low reset input of timer 1 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V. |
| 5 | OUTPUT1 | output | Output of timer 1 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads. |
| 6 | TRIGGER1 | input | Active-low trigger input of timer 1 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V. |
| 7 | GND | power_in | Ground reference of the device. |
| 8 | TRIGGER2 | input | Active-low trigger input of timer 2 that sets the output HIGH when the voltage falls below 1/3 VCC, with an absolute input voltage range of -0.3 V to VCC+0.3 V. |
| 9 | OUTPUT2 | output | Output of timer 2 rated for 20 mA output current, able to drive TTL loads and provide minimal bias for CMOS loads. |
| 10 | RESET2 | input | Active-low reset input of timer 2 that forces the output LOW when pulled low, with an absolute input voltage range of -0.3 V to VCC+0.3 V. |
| 11 | CONTROL VOLTAGE2 | passive | Control voltage pin of timer 2 that sets the internal comparator reference, and it requires no decoupling capacitor. |
| 12 | THRESHOLD2 | input | Threshold comparator input of timer 2, with an absolute input voltage range of -0.3 V to VCC+0.3 V; a level above 2/3 VCC (with trigger above 1/3 VCC) drives the output LOW. |
| 13 | DISCHARGE2 | passive | Discharge output of timer 2 that switches the timing capacitor to ground; it is ON when the output is LOW and OFF when the output is HIGH, per the truth table. |
| 14 | VCC | power_in | Supply voltage pin; the recommended supply range is 2.0 V to 18.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | IKSEMICON |
| Package | SOP-14 |
| Category | Clock and Timing |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2 | 18 | V | 2 | ||
| Supply voltage | VCC | 0 | 18 | V | 2 | ||
| Output current | IO | 20 | mA | 2 | |||
| Output current | IO | 100 | mA | 2 | |||
| Input voltage (VTH, VTRIG, VRST) | VTH, VTRIG, VRST | -0.3 | V | Printed as VCC+0.3; not a numeric value | 2 | ||
| Power dissipation | PD | 300 | mW | 2 | |||
| Operating temperature | TOPR | -20 | 70 | °C | 2 | ||
| Operating temperature | TOPR | -20 | 85 | °C | 2 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 2 | ||
| Lead solder temperature | TSOLDER | 260 | °C | 10 sec max | 2 | ||
| Threshold voltage | VTH | 0.65 | 0.7 | V | VCC 5.0 V, 25 °C | 3 | |
| Threshold voltage | VTH | 0.6 | 0.8 | V | VCC, -20 to 70 °C | 3 | |
| Trigger voltage | VTRIG | 0.31 | 0.36 | V | VCC 5.0 V, 25 °C | 3 | |
| Trigger voltage | VTRIG | 0.28 | 0.4 | V | VCC, -20 to 70 °C | 3 | |
| Reset voltage | VRST | 0.4 | 1 | V | VCC 2.0 V, 25 °C | 3 | |
| Reset voltage | VRST | 0.2 | 1.5 | V | VCC 2.0 V, -20 to 70 °C | 3 | |
| Control voltage | VCV | 0.65 | 0.69 | V | VCC 5.0 V, 25 °C | 3 | |
| Control voltage | VCV | 0.6 | 0.8 | V | VCC, -20 to 70 °C | 3 | |
| Output voltage LOW | VOL | 0.4 | V | IOL = 3.2 mA, VCC 5.0 V, 25 °C | 3 | ||
| Output voltage LOW | VOL | 1 | V | IOL = 20 mA, VCC 15.0 V, 25 °C | 3 | ||
| Output voltage LOW | VOL | 0.6 | V | IOL = 3.2 mA, VCC 5.0 V, -20 to 70 °C | 3 | ||
| Output voltage LOW | VOL | 1.5 | V | IOL = 20 mA, VCC 15.0 V, -20 to 70 °C | 3 | ||
| Output voltage HIGH | VOH | 4 | V | VCC 5.0 V, 25 °C | 3 | ||
| Output voltage HIGH | VOH | 14.3 | V | IOH = -0.8 mA, VCC 15.0 V, 25 °C | 3 | ||
| Output voltage HIGH | VOH | 3.5 | V | VCC 5.0 V, -20 to 70 °C | 3 | ||
| Output voltage HIGH | VOH | 14 | V | IOH = -0.8 mA, VCC 15.0 V, -20 to 70 °C | 3 | ||
| Supply current | ICC | 400 | A | VCC 2.0 V, 25 °C | 3 | ||
| Supply current | ICC | 600 | A | VCC 18.0 V, 25 °C | 3 | ||
| Supply current | ICC | 800 | A | VCC 2.0 V, -20 to 70 °C | 3 | ||
| Supply current | ICC | 1000 | A | VCC 18.0 V, -20 to 70 °C | 3 | ||
| Clock rise and fall time | tTHL, tTLH | 75 | ns | RL = 10 MOhm, CL = 10 pF, VCC 5.0 V, 25 °C | 4 | ||
| Clock rise and fall time | tTHL, tTLH | 150 | ns | RL = 10 MOhm, CL = 10 pF, -20 to 70 °C | 4 | ||
| Maximum oscillation frequency | fMAX | 500 | kHz | Monostable mode, VCC 2.0 V, 25 °C | 4 | ||
| Maximum oscillation frequency | fMAX | 200 | kHz | Monostable mode, VCC 18.0 V, -20 to 70 °C | 4 | ||
| Oscillation frequency temperature ratio | f | 0.02 | %/°C | RL = 1-100 kOhm, CL = 0.1 F, VCC 5.0 V, -20 to 70 °C | 4 | ||
| Oscillation frequency temperature ratio | f | 0.03 | %/°C | RL = 1-100 kOhm, CL = 0.1 F, VCC 10.0 V | 4 | ||
| Oscillation frequency temperature ratio | f | 0.06 | %/°C | RL = 1-100 kOhm, CL = 0.1 F, VCC 15.0 V | 4 | ||
| Oscillation frequency instability | f | 3 | %/V | VCC 5.0 V, 25 °C | 4 | ||
| Oscillation frequency instability | f | 6 | %/V | VCC 5.0 V, -20 to 70 °C | 4 |
CAD (KiCad official)
- Symbol:
ILC556DT - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
ilc556dt-etched.step/ilc556dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ilc556dt.step/ilc556dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: IKSEMICON datasheet (5 pp, sha256
2c9e6e1558679ebb, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).