main
Download ZIP Propose a change
Generated by adom_factory · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.2.0 · Ray
viewers Publish 0.1.0 · Ray
esp32-c3-devkit-rust-2-hero.glb Publish 0.2.0 · Ray
esp32-c3-devkit-rust-2-hero.overlay.json Publish 0.2.0 · Ray
esp32-c3-devkit-rust-2.glb Publish 0.2.0 · Ray
esp32-c3-devkit-rust-2.kicad_mod Publish 0.1.0 · Ray
esp32-c3-devkit-rust-2.kicad_sym Publish 0.1.0 · Ray
esp32-c3-devkit-rust-2.lbr Publish 0.1.0 · Ray
esp32-c3-devkit-rust-2.step Publish 0.2.0 · Ray
package.json Publish 0.2.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.2.0 · Ray

ESP32-C3-DevKit-RUST-2

Espressif Systems · development board · ESP32-C3-MINI-1

This page carries the board as a part, so a carrier board or a breakout molecule can place it: the header pinout as a symbol, the header pattern as a footprint, and a 3D model of the board standing on its headers.

Footprint

J1 (16 pins) and J2 (12 pins) and J3 (2 pins) at 2.54 mm, from the board file (esp-rs/esp-rust-board tag v2.0, the RUST-2 design). The kit ships with bare header holes. The footprint origin is the centre of the header pattern; F.Fab draws the board (22.86 x 63.50 mm) and the module.

Pinout

As printed on the board's silkscreen, with functions from Espressif's user guide. GPIO20/GPIO21: the board nets are IO20_RX and IO21_TX (U0RXD/U0TXD), which the guide's table swaps; the page follows the nets. Pin 1 of each header is at the module end.

J1

No. Name Function
1 RST EN / CHIP_PU
2 3V3 3.3 V power supply
3 NC Not connected
4 GND Ground
5 0 GPIO0, ADC1_CH0, XTAL_32K_P
6 1 GPIO1, ADC1_CH1, XTAL_32K_N
7 2 GPIO2, ADC1_CH2 (strapping); WS2812 RGB LED
8 3 GPIO3, ADC1_CH3
9 4 GPIO4, ADC2_CH0, MTMS
10 5 GPIO5, ADC2_CH1, MTDI
11 6 GPIO6, MTCK
12 7 GPIO7, MTDO
13 8 GPIO8 (strapping), I2C SCL
14 21 GPIO21, U0TXD
15 20 GPIO20, U0RXD
16 9 GPIO9 (strapping), BOOT button

J2

No. Name Function
1 BAT+ Battery supply
2 EN Enable
3 5V USB VBUS
4 NC Not connected
5 NC Not connected
6 NC Not connected
7 NC Not connected
8 NC Not connected
9 18 GPIO18, USB_D-
10 19 GPIO19, USB_D+
11 NC Not connected
12 NC Not connected

J3

No. Name Function
1 BAT+ Battery supply (battery pads below the right header)
2 BAT- Battery return (ground)

3D model

Built from the board file itself (esp-rs/esp-rust-board tag v2.0, the RUST-2 design): the real outline, mask and silkscreen, every pad, and each part at its board position. Each part with an Adom page carries that page's model, fitted to its pads on the board (worst fit 0.11 mm); the rest are KiCad library models fitted the same way. The module is adom/esp32-c3-mini-1-n4. The kit ships with bare header holes, so no headers are drawn. The solder mask is black, as the board file's stackup and Espressif's photo show.

  • L1 (Sunlord SPH4018H2R2MT, LCSC C370436 in the esp-rs BOM): its model follows Sunlord's own drawing, a square moulded body with the inductance code 2R2 printed on top. The round-looking top in Espressif's photo is not in that drawing.
  • Y1: the board names only 32.768 kHz in a 3.2 x 1.5 mm package (no part number), so it carries KiCad's 3215 crystal model and no page.
  • C12, C13 and R12 are DNP on Espressif's schematic and in the board file: their pads are bare on purpose. TP2 (IMU_INT2) is a bare test pad.

Parts on the board

Ref Part Page 3D model
C1 10nF adom/10n-0402-capacitors KiCad library
C2 10nF adom/10n-0402-capacitors KiCad library
C3 100nF adom/100n-0402-capacitors KiCad library
C4 100nF adom/100n-0402-capacitors KiCad library
C5 10uF adom/10u-0805-capacitors KiCad library
C6 22pF adom/22p-0603-capacitors KiCad library
C7 10uF adom/10u-0805-capacitors KiCad library
C8 1uF adom/1u-0402-capacitors KiCad library
C9 100nF adom/100n-0402-capacitors KiCad library
C10 1uF adom/1u-0402-capacitors KiCad library
C11 10nF adom/10n-0402-capacitors KiCad library
C12 DNP (none) not populated (DNP) (C12 is not populated on the shipped board (value DNP on Espressif schematic esp32-c3-devkit-rust-2-schematic.pdf and in the board file); footprint shown bare on purpose.)
C13 DNP (none) not populated (DNP) (C13 is not populated on the shipped board (value DNP on Espressif schematic esp32-c3-devkit-rust-2-schematic.pdf and in the board file); footprint shown bare on purpose.)
C14 1nF adom/1n-0402-capacitors KiCad library
C15 4.7uF adom/4-7u-0603-capacitors KiCad library
C16 4.7uF adom/4-7u-0603-capacitors KiCad library
D1 LESD8D3.3CAT5G adom/lesd8d3-3cat5g adom page (factory model)
D2 KT-0603R (LED) adom/kt-0603r adom page (factory model)
D3 KT-0603R (LED) adom/kt-0603r adom page (factory model)
D4 B5819W SL (B5819W) adom/b5819w-sl adom page (factory model)
D5 LESD5D5.0CT1G adom/lesd5d5-0ct1g adom page (factory model)
D6 B5819W SL (B5819W) adom/b5819w-sl adom page (factory model)
D7 LESD5D5.0CT1G adom/lesd5d5-0ct1g adom page (factory model)
D8 LESD5D5.0CT1G adom/lesd5d5-0ct1g adom page (factory model)
D9 WS2812B-MINI-V3/W (WS2812B) adom/ws2812b-mini-v3-w adom page (factory model)
J1 USB4105-GF-A adom/usb4105-gf-a adom page (factory model)
L1 SPH4018H2R2MT (SPH4018H2R2MT (2.2uH 2.2A)) adom/sph4018h2r2mt adom page (factory model)
Q1 DMG3415U-7 (DMG3415U) adom/dmg3415u-7 adom page (factory model)
R1 10k adom/10k-0402-resistors KiCad library
R2 100k adom/100k-0402-resistors KiCad library
R3 22.1k adom/22-1k-0402-resistors KiCad library
R4 5.1k adom/5-1k-0402-resistors KiCad library
R5 0 adom/0p-0402-resistors KiCad library
R6 5.1k adom/5-1k-0402-resistors KiCad library
R7 0 adom/0p-0402-resistors KiCad library
R8 10k adom/10k-0402-resistors KiCad library
R9 10k adom/10k-0402-resistors KiCad library
R10 470 adom/470-0402-resistors KiCad library
R11 0 adom/0p-0402-resistors KiCad library
R12 DNP (none) not populated (DNP) (R12 is not populated on the shipped board (value DNP on Espressif schematic esp32-c3-devkit-rust-2-schematic.pdf and in the board file); footprint shown bare on purpose.)
R14 1k adom/1k-0402-resistors KiCad library
R15 100k adom/100k-0402-resistors KiCad library
R17 10k adom/10k-0402-resistors KiCad library
R18 10k adom/10k-0402-resistors KiCad library
R19 10k adom/10k-0402-resistors KiCad library
SW1 PTS810SJM250SMTRLFS (SW_Push) adom/pts810sjm250smtrlfs adom page (factory model)
SW2 PTS810SJM250SMTRLFS (SW_Push) adom/pts810sjm250smtrlfs adom page (factory model)
TP2 IMU_INT2 test pad (none) not populated (DNP) (TP2 (IMU_INT2) is a bare test pad by design.)
U1 SHTC3-TR-2.5KS (SHTC3) adom/shtc3-tr-2-5ks adom page (factory model)
U2 ICM-42670-P adom/icm-42670-p adom page (factory model)
U3 ESP32-C3-MINI-1-N4 (ESP32-C3-MINI-1) adom/esp32-c3-mini-1-n4 adom page (factory model)
U4 edge pads (header holes) (none) not populated (DNP) (U4 is the edge pad row (header holes); the kit ships without headers, so none are drawn.)
U5 SY8088IAAC (SY8088) adom/sy8088iaac adom page (factory model)
U6 MCP73831T-2ACI/OT adom/mcp73831t-2aci-ot adom page (factory model)
Y1 32.768Hz (none) KiCad library

Documents

Schematic (Espressif)

Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB layout (Espressif)

Loads when you scroll to it. Unloads after 5 minutes in the background.