Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SPH4018H2R2MT

Sunlord · Power Inductors · SMD, 4x4mm

SPH4018H2R2MT from Sunlord, in a SMD, 4x4mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer Sunlord
Package SMD, 4x4mm
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits from the LCSC catalog entry for this part (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance 2.2 µH nominal, catalog attribute (LCSC C370436) catalog
Tolerance -20 20 % catalog attribute (LCSC C370436) catalog
Rated current 2.2 A catalog attribute (LCSC C370436) catalog

CAD (Adom-generated)

  • Symbol: SPH4018H2R2MT
  • Footprint: Adom_Gen:Sunlord_SPH4018_856c96
  • 3D model: generated to fit the land (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sunlord datasheet (8 pp, sha256 a7e2a94464879b1e, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF