3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSHTC3-TR-2.5KS
Sensirion · Temperature And Humidity Sensor · DFN-4-EP(2x2)
SHTC3-TR-2.5KS from Sensirion, in a DFN-4-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage |
| 2 | SCL | bidirectional | Serial clock, bidirectional |
| 3 | SDA | bidirectional | Serial data, bidirectional |
| 4 | VSS | power_in | Ground |
| 5 | EP | passive | Centre pad: 'internally connected to VSS' and 'may be connected to the GND net on the PCB additionally'; should be soldered (p.6) |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sensirion |
| Package | DFN-4-EP(2x2) |
| Category | Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 1.62 | 3.3 | 3.6 | V | 3 | |
| Power-up/down level | VPOR | 1.28 | 1.4 | 1.55 | V | Static power supply | 3 |
| Supply current idle state | IDD | 45 | 70 | µA | Idle state | 3 | |
| Supply current sleep mode | IDD | 0.3 | 0.6 | µA | Sleep Mode | 3 | |
| Supply current normal mode measurement average | IDD | 430 | 900 | µA | Normal Mode, average current consumption while the sensor is measuring | 3 | |
| Supply current low power mode measurement average | IDD | 270 | 570 | µA | Low Power M., average current consumption while the sensor is measuring | 3 | |
| Low level input voltage | VIL | 0.42 | V | Printed as 0.42 VDD | 3 | ||
| High level input voltage | VIH | 0.7 | V | Printed as 0.7 VDD | 3 | ||
| Low level output voltage | VOL | 0.2 | V | 3 mA sink current; printed as 0.2 VDD | 3 | ||
| Accuracy tolerance temperature specified range | -40 | 125 | °C | Specified range | 2 | ||
| Accuracy tolerance relative humidity specified range | 0 | 100 | %RH | Specified range | 2 | ||
| Recommended normal operating temperature range | 5 | 60 | °C | Recommended normal temperature and humidity range | 3 | ||
| Recommended normal operating humidity range | 20 | 80 | %RH | Recommended normal temperature and humidity range | 3 | ||
| Supply voltage absolute maximum | VDD | -0.3 | 4 | V | 4 | ||
| Operating temperature range absolute maximum | -40 | 125 | °C | Operating temperature range | 4 | ||
| Storage temperature range absolute maximum | -40 | 125 | °C | Storage temperature range | 4 | ||
| ESD HBM | -2 | 2 | kV | Human body model | 4 | ||
| ESD CDM | -500 | 500 | V | Change device model | 4 | ||
| Latch up | -100 | 100 | mA | JESD78 Class II, 125°C | 4 | ||
| Power-up time | tPU | 180 | 240 | µs | After hard reset, VDD ≥ VPOR | 4 | |
| Soft reset time | tSR | 180 | 240 | µs | After soft reset | 4 | |
| Measurement duration normal mode | tMEAS | 10.8 | 12.1 | ms | Average, normal mode, duration for a humidity and temperature measurement | 4 | |
| Measurement duration low power mode | tMEAS | 0.7 | 0.8 | ms | Average, low power mode, duration for a humidity and temperature measurement | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | The sensor chip is made of silicon and is mounted to a lead frame. The latter is made of Cu plated with Ni/Pd/Au. Chip | 9 |
CAD (KiCad official)
- Symbol:
SHTC3-TR-2.5KS - Footprint:
Sensor_Humidity:Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm - 3D model: DFN-4-EP(2x2), generated on the KiCad land (body 2 x 2 mm, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
shtc3-tr-2-5ks-etched.step/shtc3-tr-2-5ks-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);shtc3-tr-2-5ks.step/shtc3-tr-2-5ks.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sensirion datasheet (14 pp, sha256
dbe979c975fe5206, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).