molecule
ESC G431
Public Made by Adomby adom
Single-motor ESC for the drone test cell: STM32G431 + DRV8300 driving a 3-phase bridge of six BSC016N06NS MOSFETs, TPSM365 buck to 12 V, INA181 low-side current sense (25 mV/A, 131 A full-scale). Runs AM32. 64 x 74 mm, 4-layer.
main
(kicad_symbol_lib (version 20250114) (generator esc_component_inventory) (symbol adom-jumper-4x2-land-pattern (pin_numbers (hide yes)) (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property Reference JP (at 0 2.794 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property Value Jumper_2_Small_Open (at 0 -2.286 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property Footprint adom-jumper-4x2-land-pattern:adom-jumper-4x2-land-pattern (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property Datasheet "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property Description "Jumper, 2-pole, small symbol, open" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property ki_keywords "Jumper SPST" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property ki_fp_filters "Jumper* TestPoint*2Pads* TestPoint*Bridge*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol adom-jumper-4x2-land-pattern_0_0 (circle (center -1.016 0) (radius 0.254) (stroke (width 0) (type default)) (fill (type none))) (circle (center 1.016 0) (radius 0.254) (stroke (width 0) (type default)) (fill (type none)))) (symbol adom-jumper-4x2-land-pattern_0_1 (arc (start -0.762 0.7656) (mid 0 1.0189) (end 0.762 0.7656) (stroke (width 0) (type default)) (fill (type none)))) (symbol adom-jumper-4x2-land-pattern_1_1 (pin passive line (at -2.54 0 0) (length 1.27) (name A (effects (font (size 1.27 1.27)))) (number 1 (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 0 180) (length 1.27) (name B (effects (font (size 1.27 1.27)))) (number 2 (effects (font (size 1.27 1.27)))))) (embedded_fonts no)))