ESC G431

@@ -0,0 +1,6 @@+# Astra ESC project-local CAD++These definitions belong to this board, not the global component catalog. Bare test pads do not identify a purchased component. The interface land patterns have unresolved purchased identities. Their source symbols and footprints are retained here without inventing MPNs.++- [Copper test pads](esc-copper-test-pads/README.md)+- [Interface land patterns](esc-interface-land-patterns/README.md)

@@ -0,0 +1,21 @@+# esc-copper-test-pads++test point; exact purchased ordering code not specified by the source board.++Used at **TP8, TP17, TP5, TP4, TP7, TP3, TP16, TP20, TP9, TP1, TP19, TP12, TP13, TP11, TP15, TP2, TP10, TP14, TP6, TP18, TP21** on [Astra ESC G431](https://wiki.adom.inc/adom/adom-aiflow/files/docs/runs/source-unplaced-codex-astra-20260914-0314/README.md).++## Identity and source++Manufacturer: not stated in the source board. Exact identity comes from the board properties or the supplier code resolution retained in [provenance.json](provenance.json). Source descriptions are reproduced as design metadata, not independently qualified electrical ratings.++This is a **CAD land-pattern page, not an identified purchasable component**. Test pads are bare PCB copper. Where applicable, a connector or jumper ordering code still needs selection; no arbitrary MPN is assigned.++## Reusable CAD++- [TestPoint_Pad_D1.0mm.kicad_mod](TestPoint_Pad_D1.0mm.kicad_mod)+- [esc-copper-test-pads.kicad_sym](esc-copper-test-pads.kicad_sym)+- [TestPoint_Pad_D1.5mm.kicad_mod](TestPoint_Pad_D1.5mm.kicad_mod)++The footprint is extracted from the actual final board with board position, nets and UUIDs removed. The symbol is extracted from the published source schematic where available. Verify pin numbering and land dimensions before use in a new design.++**3D model status:** no verified standalone 3D model is published on this page yet. Nonportable developer paths were removed from the reusable footprint; original references are retained in provenance. This page does not imply a completed manufacturer CAD bundle.

@@ -0,0 +1 @@+(footprint TestPoint_Pad_D1.0mm (layer F.Cu) (descr "SMD pad as test Point, diameter 1.0mm") (tags "test point SMD pad") (property Reference REF** (at 0 -1.448 0.0) (layer F.SilkS) (hide yes) (uuid 4eab154f-751c-4d07-865e-8a1a52734fdb) (effects (font (size 1 1) (thickness 0.15)))) (property Value +VBAT (at 0 1.55 0.0) (layer F.Fab) (hide yes) (uuid 620e4846-6488-4960-9aff-028727157855) (effects (font (size 1 1) (thickness 0.15)))) (property Datasheet "" (at 0 0 0.0) (unlocked yes) (layer F.Fab) (hide yes) (uuid 3b686a43-fbb6-4ace-af22-380946b711a4) (effects (font (size 1.27 1.27) (thickness 0.15)))) (property Description "test point" (at 0 0 0.0) (unlocked yes) (layer F.Fab) (hide yes) (uuid e06e4eca-ed82-4e5d-bd52-4876a7e8bbdf) (effects (font (size 1.27 1.27) (thickness 0.15)))) (property ki_fp_filters "Pin* Test*") (attr exclude_from_pos_files exclude_from_bom) (duplicate_pad_numbers_are_jumpers no) (fp_circle (center 0 0) (end 0 0.7) (stroke (width 0.12) (type solid)) (fill no) (layer F.SilkS) (uuid f572da41-6a3a-4718-a306-5cd853a2f5f6)) (fp_circle (center 0 0) (end 1 0) (stroke (width 0.05) (type solid)) (fill no) (layer F.CrtYd) (uuid 1c48d412-1192-473d-a50f-c23a25441e12)) (pad 1 smd circle (at 0 0) (size 1 1) (layers F.Cu F.Mask)) (embedded_fonts no))

@@ -0,0 +1 @@+(footprint TestPoint_Pad_D1.5mm (layer F.Cu) (descr "SMD pad as test Point, diameter 1.5mm") (tags "test point SMD pad") (property Reference REF** (at 0 -1.648 0.0) (layer F.SilkS) (hide yes) (uuid 3bfd3632-6096-4cfb-96d4-a8ca1a576a63) (effects (font (size 1 1) (thickness 0.15)))) (property Value "PHASE A" (at 0 1.75 0.0) (layer F.Fab) (hide yes) (uuid dff768dc-ae32-494f-b363-69013f2cf848) (effects (font (size 1 1) (thickness 0.15)))) (property Datasheet "" (at 0 0 0.0) (unlocked yes) (layer F.Fab) (hide yes) (uuid fcdcf45c-7d4a-4cf9-9d65-1be228115f66) (effects (font (size 1.27 1.27) (thickness 0.15)))) (property Description "test point" (at 0 0 0.0) (unlocked yes) (layer F.Fab) (hide yes) (uuid 0b1570c4-3073-4e4a-b13e-60d37ba6a216) (effects (font (size 1.27 1.27) (thickness 0.15)))) (property ki_fp_filters "Pin* Test*") (attr exclude_from_pos_files exclude_from_bom) (duplicate_pad_numbers_are_jumpers no) (fp_circle (center 0 0) (end 0 0.95) (stroke (width 0.12) (type solid)) (fill no) (layer F.SilkS) (uuid 31e7b57e-4925-4126-bedf-b6dc086e6bc4)) (fp_circle (center 0 0) (end 1.25 0) (stroke (width 0.05) (type solid)) (fill no) (layer F.CrtYd) (uuid 0b6b9910-f2e5-4280-a62e-1378ad977788)) (pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)) (embedded_fonts no))

@@ -0,0 +1 @@+(kicad_symbol_lib (version 20250114) (generator esc_component_inventory) (symbol esc-copper-test-pads (pin_numbers (hide yes)) (pin_names (offset 0.762) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property Reference TP (at 0 6.858 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property Value TestPoint (at 0 5.08 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property Footprint esc-copper-test-pads:TestPoint_Pad_D1.0mm (at 5.08 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property Datasheet "" (at 5.08 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property Description "test point" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property ki_keywords "test point tp" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property ki_fp_filters "Pin* Test*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol esc-copper-test-pads_0_1 (circle (center 0 3.302) (radius 0.762) (stroke (width 0) (type default)) (fill (type none)))) (symbol esc-copper-test-pads_1_1 (pin passive line (at 0 0 90) (length 2.54) (name 1 (effects (font (size 1.27 1.27)))) (number 1 (effects (font (size 1.27 1.27)))))) (embedded_fonts no)))

@@ -0,0 +1,12 @@+# ESC interface land patterns++JP1 uses ADOM_JUMPER_4x2; J1 uses a 2×7, 1.27 mm SMD STDC14 header footprint. The source board specifies neither an exact jumper assembly nor a connector manufacturer ordering code. These are two reusable CAD definitions, not claimed purchasable MPNs.++- [adom-jumper-4x2-land-pattern.kicad_mod](adom-jumper-4x2-land-pattern.kicad_mod)+- [adom-jumper-4x2-land-pattern.kicad_sym](adom-jumper-4x2-land-pattern.kicad_sym)+- [stdc14-127mm-smd-header-land-pattern.kicad_mod](stdc14-127mm-smd-header-land-pattern.kicad_mod)+- [stdc14-127mm-smd-header-land-pattern.kicad_sym](stdc14-127mm-smd-header-land-pattern.kicad_sym)++Extracted from the actual Astra ESC board and published source schematic. Board position and net assignments removed; verify pad geometry and connector fit before choosing parts. No verified standalone 3D models are included.++[Provenance](provenance.json)

@@ -0,0 +1 @@+(footprint adom-jumper-4x2-land-pattern (layer F.Cu) (property Reference REF** (at 0 0 90.0) (unlocked yes) (layer F.SilkS) (hide yes) (uuid d07f5b65-be39-4d82-8af1-fc6a04f2eaeb) (effects (font (size 0.5 0.5) (thickness 0.1)))) (property Value MC_JMP (at 1 -2.5 0.0) (unlocked yes) (layer F.Fab) (hide yes) (uuid 6db28d4d-c2b2-49b9-b13f-d6783c8579cf) (effects (font (size 0.5 0.5) (thickness 0.125)))) (property Datasheet "" (at 1 0 0.0) (unlocked yes) (layer F.Fab) (hide yes) (uuid f2274db2-dbb1-4111-831e-bfb8e51c9e89) (effects (font (size 1.27 1.27) (thickness 0.15)))) (property Description "Jumper, 2-pole, small symbol, open" (at 1 0 0.0) (unlocked yes) (layer F.Fab) (hide yes) (uuid f5d25345-8582-46c7-b35c-ca449f46f8ed) (effects (font (size 1.27 1.27) (thickness 0.15)))) (property ki_fp_filters "Jumper* TestPoint*2Pads* TestPoint*Bridge*") (attr through_hole exclude_from_pos_files exclude_from_bom dnp) (duplicate_pad_numbers_are_jumpers no) (fp_line (start -1 0) (end 1 0) (stroke (width 0.15) (type solid)) (layer F.SilkS) (uuid 21074138-db20-43a6-b29c-d240dae5e60d)) (fp_line (start -2.25 -1.25) (end 2.25 -1.25) (stroke (width 0.05) (type solid)) (layer B.CrtYd) (uuid 2c512537-717d-4292-9ed2-a8466070119f)) (fp_line (start -2.25 1.25) (end -2.25 -1.25) (stroke (width 0.05) (type solid)) (layer B.CrtYd) (uuid 6450c223-17a8-4655-ad32-5f7633dec6c2)) (fp_line (start 2.25 -1.25) (end 2.25 1.25) (stroke (width 0.05) (type solid)) (layer B.CrtYd) (uuid a8381102-7c5e-4aab-a893-6cce13d6f4c0)) (fp_line (start 2.25 1.25) (end -2.25 1.25) (stroke (width 0.05) (type solid)) (layer B.CrtYd) (uuid 70afc93f-44df-42bb-86f5-de805b26a7ff)) (fp_line (start -2.25 -1.25) (end -2.25 1.25) (stroke (width 0.05) (type solid)) (layer F.CrtYd) (uuid cc6864c8-2f83-4653-82b6-dcf5cf9ffd97)) (fp_line (start -2.25 1.25) (end 2.25 1.25) (stroke (width 0.05) (type solid)) (layer F.CrtYd) (uuid d44ec6e1-3b1c-4ce7-8b65-b4b3bb1c9771)) (fp_line (start 2.25 -1.25) (end -2.25 -1.25) (stroke (width 0.05) (type solid)) (layer F.CrtYd) (uuid 9b22bbc0-7c71-4a69-9c0a-6a776c49d8a7)) (fp_line (start 2.25 1.25) (end 2.25 -1.25) (stroke (width 0.05) (type solid)) (layer F.CrtYd) (uuid 289193f1-c7a2-47db-82d3-cedd2c5aaa8b)) (fp_line (start -2 -1) (end 2 -1) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid d7075ceb-8a1c-4a1d-b961-2df9d7ee442c)) (fp_line (start -2 1) (end -2 -1) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid d117187e-812d-4d4a-a641-cb6dc015f399)) (fp_line (start 0 -1) (end 0 1) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 141e1ceb-fcbb-4b60-886f-cd0b480cba6b)) (fp_line (start 2 -1) (end 2 1) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 101bee30-1640-4efc-a2fe-114f451d368d)) (fp_line (start 2 -1) (end 2 1) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid ca5d3673-64ca-4b02-93ac-65ad1e83e0df)) (fp_line (start 2 1) (end -2 1) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 099d3f46-3be3-4ead-9cab-83e6f732d86b)) (fp_text user ${REFERENCE} (at 0 0 0.0) (unlocked yes) (layer F.Fab) (uuid 03b77765-0eb2-48da-addc-c0ea0b95e98a) (effects (font (size 0.5 0.5) (thickness 0.125)))) (pad 1 thru_hole circle (at -1 0) (size 1.3 1.3) (drill 0.78) (layers *.Cu *.Mask) (remove_unused_layers no)) (pad 2 thru_hole circle (at 1 0) (size 1.3 1.3) (drill 0.78) (layers *.Cu *.Mask) (remove_unused_layers no)) (embedded_fonts no))

@@ -0,0 +1 @@+(kicad_symbol_lib (version 20250114) (generator esc_component_inventory) (symbol adom-jumper-4x2-land-pattern (pin_numbers (hide yes)) (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property Reference JP (at 0 2.794 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property Value Jumper_2_Small_Open (at 0 -2.286 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property Footprint adom-jumper-4x2-land-pattern:adom-jumper-4x2-land-pattern (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property Datasheet "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property Description "Jumper, 2-pole, small symbol, open" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property ki_keywords "Jumper SPST" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property ki_fp_filters "Jumper* TestPoint*2Pads* TestPoint*Bridge*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol adom-jumper-4x2-land-pattern_0_0 (circle (center -1.016 0) (radius 0.254) (stroke (width 0) (type default)) (fill (type none))) (circle (center 1.016 0) (radius 0.254) (stroke (width 0) (type default)) (fill (type none)))) (symbol adom-jumper-4x2-land-pattern_0_1 (arc (start -0.762 0.7656) (mid 0 1.0189) (end 0.762 0.7656) (stroke (width 0) (type default)) (fill (type none)))) (symbol adom-jumper-4x2-land-pattern_1_1 (pin passive line (at -2.54 0 0) (length 1.27) (name A (effects (font (size 1.27 1.27)))) (number 1 (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 0 180) (length 1.27) (name B (effects (font (size 1.27 1.27)))) (number 2 (effects (font (size 1.27 1.27)))))) (embedded_fonts no)))

@@ -0,0 +1,50 @@+{+  "sourcePages": [+    "https://wiki.adom.inc/adom/esc-g431"+  ],+  "members": [+    {+      "mpn": "adom-jumper-4x2-land-pattern",+      "refs": [+        "JP1"+      ],+      "page": "adom/adom-jumper-4x2-land-pattern",+      "status": "new",+      "kind": "group",+      "manufacturer": null,+      "properties": {+        "Reference": "JP1",+        "Value": "MC_JMP",+        "Datasheet": "",+        "Description": "Jumper, 2-pole, small symbol, open",+        "ki_fp_filters": "Jumper* TestPoint*2Pads* TestPoint*Bridge*"+      },+      "footprints": [+        "Adom Footprint Library:ADOM_JUMPER_4x2"+      ],+      "directory": "components/pages/adom-jumper-4x2-land-pattern"+    },+    {+      "mpn": "stdc14-127mm-smd-header-land-pattern",+      "refs": [+        "J1"+      ],+      "page": "adom/stdc14-127mm-smd-header-land-pattern",+      "status": "new",+      "kind": "group",+      "manufacturer": null,+      "properties": {+        "Reference": "J1",+        "Value": "Conn_ST_STDC14",+        "Datasheet": "https://www.st.com/content/ccc/resource/technical/document/user_manual/group1/99/49/91/b6/b2/3a/46/e5/DM00526767/files/DM00526767.pdf/jcr:content/translations/en.DM00526767.pdf",+        "Description": "ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART",+        "KiLib_Generator": "connector/pin_header_socket",+        "ki_fp_filters": "PinHeader?2x07?P1.27mm*"+      },+      "footprints": [+        "Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD"+      ],+      "directory": "components/pages/stdc14-127mm-smd-header-land-pattern"+    }+  ]+}\ No newline at end of file

@@ -0,0 +1 @@+(footprint stdc14-127mm-smd-header-land-pattern (layer F.Cu) (descr "surface-mounted straight pin header, 2x07, 1.27mm pitch, double rows") (tags "Surface mounted pin header SMD 2x07 1.27mm double row") (property Reference REF** (at 0 -5.555 180.0) (layer F.SilkS) (hide yes) (uuid 849e6bee-5ca0-492c-9ab1-fb8ced57b6c2) (effects (font (size 1 1) (thickness 0.15)))) (property Value Conn_ST_STDC14 (at 0 5.555 180.0) (layer F.Fab) (hide yes) (uuid ce0469fd-10e8-4dac-b414-ad7ebb81f18f) (effects (font (size 1 1) (thickness 0.15)))) (property Datasheet https://www.st.com/content/ccc/resource/technical/document/user_manual/group1/99/49/91/b6/b2/3a/46/e5/DM00526767/files/DM00526767.pdf/jcr:content/translations/en.DM00526767.pdf (at 0 0 180.0) (layer F.Fab) (hide yes) (uuid 2315f99a-1fad-4c55-b2c9-a10ca2d763dd) (effects (font (size 1.27 1.27)))) (property Description "ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART" (at 0 0 180.0) (layer F.Fab) (hide yes) (uuid 281376ee-54c1-4921-836b-b066c399508b) (effects (font (size 1.27 1.27)))) (property KiLib_Generator connector/pin_header_socket (at 0 0 180.0) (layer F.SilkS) (hide yes) (uuid 19fbca1d-19c8-4872-b565-fd069ed6069c) (effects (font (size 1 1) (thickness 0.15)))) (property ki_fp_filters PinHeader?2x07?P1.27mm*) (attr smd exclude_from_pos_files exclude_from_bom) (duplicate_pad_numbers_are_jumpers no) (fp_line (start -3.09 -4.489999) (end -1.815 -4.49) (stroke (width 0.12) (type solid)) (layer F.SilkS) (uuid 30948084-b9a0-4594-bcc0-0cebeac91cb5)) (fp_line (start -1.815 -4.555) (end -1.815 -4.49) (stroke (width 0.12) (type solid)) (layer F.SilkS) (uuid b5bacab2-a04d-4e58-8416-0384ba804c99)) (fp_line (start -1.815 -4.555) (end 1.815 -4.555) (stroke (width 0.12) (type solid)) (layer F.SilkS) (uuid 905f0472-551e-4f14-9d40-4fc51ea19e55)) (fp_line (start -1.815 4.49) (end -1.815 4.555) (stroke (width 0.12) (type solid)) (layer F.SilkS) (uuid 0f4e111c-f81e-454a-b747-805b12e5c2e4)) (fp_line (start -1.815 4.555) (end 1.815 4.555) (stroke (width 0.12) (type solid)) (layer F.SilkS) (uuid 8bac6fcb-09f1-4b7e-84cd-108b1818885e)) (fp_line (start 1.815 -4.555) (end 1.815 -4.49) (stroke (width 0.12) (type solid)) (layer F.SilkS) (uuid 84b5c304-c4bc-4721-81ff-81d9bdf02b32)) (fp_line (start 1.815 4.49) (end 1.815 4.555) (stroke (width 0.12) (type solid)) (layer F.SilkS) (uuid a00e73c1-0954-487f-aac0-3d2e56785081)) (fp_poly (pts (xy -4.290001 -4.95) (xy 4.290001 -4.95) (xy 4.290001 4.95) (xy -4.290001 4.95)) (stroke (width 0.05) (type solid)) (fill no) (layer F.CrtYd) (uuid c7a7b379-f1bc-4b28-b319-7446873213be)) (fp_line (start -2.75 -4.01) (end -2.75 -3.61) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 0b724bfe-e76c-4321-98de-ab41083f135a)) (fp_line (start -2.75 -3.61) (end -1.705001 -3.61) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 3130b3bb-6dd1-4d6b-aa33-7d2d15e8fca0)) (fp_line (start -2.75 -2.74) (end -2.75 -2.34) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 13f50ac2-7a26-4e73-aef7-a6485d806177)) (fp_line (start -2.75 -2.34) (end -1.705 -2.34) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 8bdd3844-48cd-49b8-873e-660b8ed530cf)) (fp_line (start -2.75 -1.47) (end -2.75 -1.07) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid e79c29dd-e2d8-4007-920d-f850cf0fde80)) (fp_line (start -2.75 -1.07) (end -1.705 -1.07) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid c7f0412d-9c3c-48f2-863d-526513c5b681)) (fp_line (start -2.75 -0.2) (end -2.75 0.2) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 27ff0dde-f3a6-4a05-a06c-ef47a362d408)) (fp_line (start -2.75 0.2) (end -1.705 0.199999) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 885ef76c-2b2f-430e-a852-ea3c4dd004b0)) (fp_line (start -2.75 1.07) (end -2.75 1.47) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid f8748b01-30c5-4d61-8e56-51a62336a905)) (fp_line (start -2.75 1.47) (end -1.705 1.47) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 5e76df3e-c1c8-4b72-bd3b-d63cbee99706)) (fp_line (start -2.75 2.34) (end -2.75 2.74) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid c116e096-ae38-4ac5-bf9e-06e022ab8848)) (fp_line (start -2.75 2.74) (end -1.705 2.740001) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 5bfcb844-7989-4b21-af89-cdfc8357be4e)) (fp_line (start -2.75 3.61) (end -2.75 4.01) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 10e131a8-9c76-4318-899f-a0ac4d43679c)) (fp_line (start -2.75 4.01) (end -1.705 4.01) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 61ca1719-77e6-4e09-9235-597c06d0f2fa)) (fp_line (start -1.705001 3.61) (end -2.75 3.61) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid e94979b9-72c0-4440-8bf5-5b424e8d1b57)) (fp_line (start -1.705 -4.01) (end -2.75 -4.01) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 58d01a12-d54f-43ca-bb46-6be370ee852c)) (fp_line (start -1.705 -4.01) (end -1.27 -4.445) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 5623aabc-0092-48b2-ad57-8ddd229de1ad)) (fp_line (start -1.705 -2.740001) (end -2.75 -2.74) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid a2712149-d628-416c-b287-6f210ca75972)) (fp_line (start -1.705 -1.47) (end -2.75 -1.47) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 04011f8c-97f6-46de-ab1c-ee4f1cb08354)) (fp_line (start -1.705 -0.199999) (end -2.75 -0.2) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 06bc4a6a-8454-47bc-9be2-d3377bbeb591)) (fp_line (start -1.705 1.07) (end -2.75 1.07) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid d4d3e723-8e7f-4aaa-b9aa-8fa8797c3fc2)) (fp_line (start -1.705 2.34) (end -2.75 2.34) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid b8ae6144-80ae-4433-ba8b-60fc0de2e842)) (fp_line (start -1.705 4.445001) (end -1.705 -4.01) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 69fce7cd-0261-4435-a98c-b3fa6fa7a23e)) (fp_line (start -1.27 -4.445) (end 1.705 -4.445001) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 44592d78-730f-4475-b9b5-b96bc6d30ae3)) (fp_line (start 1.705 -4.445001) (end 1.705 4.445001) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 481b9e68-8699-492c-af6d-ac7b63380cf6)) (fp_line (start 1.705 -4.01) (end 2.75 -4.01) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 005e06d5-ff2b-40c1-b1d2-fd04bdc3d798)) (fp_line (start 1.705 -2.740001) (end 2.75 -2.74) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 4a6299a6-3059-40dd-884f-e5e1dcc66a3f)) (fp_line (start 1.705 -1.47) (end 2.75 -1.47) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid f79c1e47-d93c-4ccd-9066-2e45ce74c16a)) (fp_line (start 1.705 -0.199999) (end 2.75 -0.2) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid d5500507-d404-4e0f-904a-6de0fc493e5c)) (fp_line (start 1.705 1.07) (end 2.75 1.07) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 0c6459da-e6f9-4fd9-8cea-49612f331a43)) (fp_line (start 1.705 2.34) (end 2.75 2.34) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid ed2dc331-5fd6-42ec-800e-c5a7ba32bd5c)) (fp_line (start 1.705 4.445001) (end -1.705 4.445001) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid b3e46137-679c-4355-80de-faf57d372f80)) (fp_line (start 1.705001 3.61) (end 2.75 3.61) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 463d07ce-075c-4904-af62-eda3d7c7046f)) (fp_line (start 2.75 -4.01) (end 2.75 -3.61) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 1532fad8-5bdb-4ac1-ba10-1fbd2ed79362)) (fp_line (start 2.75 -3.61) (end 1.705001 -3.61) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 9de4f110-c699-4ec4-a806-4ce7e89bb64c)) (fp_line (start 2.75 -2.74) (end 2.75 -2.34) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid b99c14b7-bf4b-4ea8-841f-dc05150a15f7)) (fp_line (start 2.75 -2.34) (end 1.705 -2.34) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 48a1ea21-e280-4c84-a1d7-1eddb0a7c948)) (fp_line (start 2.75 -1.47) (end 2.75 -1.07) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 17a053be-679c-4f75-8b0b-b0ee2646722c)) (fp_line (start 2.75 -1.07) (end 1.705 -1.07) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 1191d8d8-67c6-4fa4-9da7-0184d15322ca)) (fp_line (start 2.75 -0.2) (end 2.75 0.2) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 8c422b46-c46c-40ea-86ba-7f4bad73e6af)) (fp_line (start 2.75 0.2) (end 1.705 0.199999) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 6ab85ad7-805e-4c63-907a-6c20b53edb05)) (fp_line (start 2.75 1.07) (end 2.75 1.47) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid a4b8de36-ecd7-408d-8cda-d4c96f330c6f)) (fp_line (start 2.75 1.47) (end 1.705 1.47) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid ae1de12f-d41b-4211-8231-ef214ea2a3a3)) (fp_line (start 2.75 2.34) (end 2.75 2.74) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid 1fc2e197-c74d-4d6d-959e-263c79580b50)) (fp_line (start 2.75 2.74) (end 1.705 2.740001) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid f5939a1a-4b6a-4761-a216-0a3c931fb93a)) (fp_line (start 2.75 3.61) (end 2.75 4.01) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid d3058016-9729-420c-8207-2317fac4fb1f)) (fp_line (start 2.75 4.01) (end 1.705 4.01) (stroke (width 0.1) (type solid)) (layer F.Fab) (uuid b42ebbea-7edf-4ecd-ac3e-26c4799df538)) (fp_text user ${REFERENCE} (at 0 0 90.0) (layer F.Fab) (uuid 4d6c5828-1c2c-4520-b11c-f72c49913a86) (effects (font (size 1 1) (thickness 0.15)))) (pad 1 smd rect (at -1.95 -3.81) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 2 smd rect (at 1.95 -3.81) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 3 smd rect (at -1.95 -2.54) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 4 smd rect (at 1.95 -2.54) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 5 smd rect (at -1.95 -1.27) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 6 smd rect (at 1.95 -1.27) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 7 smd rect (at -1.95 0) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 8 smd rect (at 1.95 0) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 9 smd rect (at -1.95 1.27) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 10 smd rect (at 1.95 1.27) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 11 smd rect (at -1.95 2.54) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 12 smd rect (at 1.95 2.54) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 13 smd rect (at -1.95 3.81) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (pad 14 smd rect (at 1.95 3.81) (size 2.4 0.74) (layers F.Cu F.Mask F.Paste)) (embedded_fonts no))

@@ -0,0 +1 @@+(kicad_symbol_lib (version 20250114) (generator esc_component_inventory) (symbol stdc14-127mm-smd-header-land-pattern (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property Reference J (at -8.89 16.51 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property Value Conn_ST_STDC14 (at 17.78 16.51 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right bottom))) (property Footprint stdc14-127mm-smd-header-land-pattern:stdc14-127mm-smd-header-land-pattern (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property Datasheet https://www.st.com/content/ccc/resource/technical/document/user_manual/group1/99/49/91/b6/b2/3a/46/e5/DM00526767/files/DM00526767.pdf/jcr:content/translations/en.DM00526767.pdf (at -8.89 -31.75 90) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property Description "ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property ki_keywords "ST STM32 Cortex Debug Connector ARM SWD JTAG" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property ki_fp_filters PinHeader?2x07?P1.27mm* (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol stdc14-127mm-smd-header-land-pattern_0_1 (rectangle (start -10.16 15.24) (end 10.16 -15.24) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol stdc14-127mm-smd-header-land-pattern_1_1 (pin no_connect line (at -10.16 5.08 0) (length 2.54) (hide yes) (name NC (effects (font (size 1.27 1.27)))) (number 1 (effects (font (size 1.27 1.27))))) (pin no_connect line (at -10.16 2.54 0) (length 2.54) (hide yes) (name NC (effects (font (size 1.27 1.27)))) (number 2 (effects (font (size 1.27 1.27))))) (pin power_in line (at 0 17.78 270) (length 2.54) (name VCC (effects (font (size 1.27 1.27)))) (number 3 (effects (font (size 1.27 1.27))))) (pin bidirectional line (at 12.7 5.08 180) (length 2.54) (name JTMS/SWDIO (effects (font (size 1.27 1.27)))) (number 4 (effects (font (size 1.27 1.27))))) (pin power_in line (at 0 -17.78 90) (length 2.54) (name GND (effects (font (size 1.27 1.27)))) (number 5 (effects (font (size 1.27 1.27))))) (pin output line (at 12.7 7.62 180) (length 2.54) (name JCLK/SWCLK (effects (font (size 1.27 1.27)))) (number 6 (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -17.78 90) (length 2.54) (hide yes) (name GND (effects (font (size 1.27 1.27)))) (number 7 (effects (font (size 1.27 1.27))))) (pin input line (at 12.7 2.54 180) (length 2.54) (name JTDO/SWO (effects (font (size 1.27 1.27)))) (number 8 (effects (font (size 1.27 1.27))))) (pin input line (at 12.7 -5.08 180) (length 2.54) (name JRCLK/NC (effects (font (size 1.27 1.27)))) (number 9 (effects (font (size 1.27 1.27))))) (pin output line (at 12.7 0 180) (length 2.54) (name JTDI/NC (effects (font (size 1.27 1.27)))) (number 10 (effects (font (size 1.27 1.27))))) (pin passive line (at -2.54 -17.78 90) (length 2.54) (name GNDDetect (effects (font (size 1.27 1.27)))) (number 11 (effects (font (size 1.27 1.27))))) (pin open_collector line (at 12.7 12.7 180) (length 2.54) (name ~{RST} (effects (font (size 1.27 1.27)))) (number 12 (effects (font (size 1.27 1.27))))) (pin output line (at 12.7 -10.16 180) (length 2.54) (name VCP_RX (effects (font (size 1.27 1.27)))) (number 13 (effects (font (size 1.27 1.27))))) (pin input line (at 12.7 -12.7 180) (length 2.54) (name VCP_TX (effects (font (size 1.27 1.27)))) (number 14 (effects (font (size 1.27 1.27)))))) (embedded_fonts no)))