EDA Skillpack

{
  "_hint": "filledAreaByLayerMm2 is the copper KiCad's zones keep on each layer: for a copper-ablation process, what does not have to be milled away. Add pours with kicad_add_zone; kicad_routing_validate is the DRC.",
  "_note": "Areas are KiCad's own filled polygons of every zone (outline minus holes), summed per layer; the coverage is against the outline's bounding box, so a non-rectangular board reads a little low. Pads, tracks and vias outside zones are not counted.",
  "_timeoutHint": "ab waits up to 130s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `kicad_status` until it reports done.",
  "boardBoxAreaMm2": 4736.0,
  "boardPath": "C:/Users/arav/Downloads/adom-gate/esc-demo/astra-independent/esc-g431-astra-independent.kicad_pcb",
  "bridgeVersion": "1.0.7",
  "durationMs": 404,
  "elapsedMs": 349,
  "error": "",
  "filledAreaByLayerMm2": {
    "In1.Cu": 4197.75,
    "In2.Cu": 4120.8
  },
  "filledCoverageByLayerPercent": {
    "In1.Cu": 88.64,
    "In2.Cu": 87.01
  },
  "kicadVersion": "10.0.3",
  "mechanism": "ipc",
  "output": "",
  "refilled": true,
  "revision": "060d9af07a76665b9d516f02053a73a9bf473bd8428724262dfd1b7dcb5678ea",
  "route": {
    "nodeId": "9a44e8faa7684dc0c1c3d2bbaf22827147f4800718cf15716cdb87f8cdb4f040",
    "peer": "arav-rog",
    "rttMs": 402,
    "via": "mesh"
  },
  "schemaVersion": 1,
  "socket": "ipc://C:\\Users\\arav\\AppData\\Local\\Temp\\kicad\\api.sock",
  "source": "live-editor",
  "status": "ok",
  "statusVerb": "kicad_status",
  "success": true,
  "timeoutSeconds": 130,
  "zoneCount": 2,
  "zones": [
    {
      "filled": true,
      "fills": [
        {
          "areaMm2": 4197.75,
          "layer": "In1.Cu",
          "polygons": 1
        }
      ],
      "id": "0bce23f6-5c7f-460d-9588-0aea186e7006",
      "layers": [
        "In1.Cu"
      ],
      "name": "Astra reference GND",
      "net": "GND",
      "outlineAreaMm2": 4599.0,
      "priority": 0,
      "type": "copper"
    },
    {
      "filled": true,
      "fills": [
        {
          "areaMm2": 4120.8,
          "layer": "In2.Cu",
          "polygons": 1
        }
      ],
      "id": "5d6e47a0-97d8-4e29-97a8-e908e0ed35e3",
      "layers": [
        "In2.Cu"
      ],
      "name": "Astra reference +3V3",
      "net": "+3V3",
      "outlineAreaMm2": 4599.0,
      "priority": 0,
      "type": "copper"
    }
  ]
}