3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM95M04-DRDW6TP
STMicroelectronics · EEPROM · TSSOP-8 (ST TSSOP8)
M95M04-DRDW6TP from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip select; the device is selected when S is driven low, and a falling edge on S is required after power-up before any instruction can start. |
| 2 | Q | output | Serial data output of the SPI bus. |
| 3 | W | input | Write protect input used for hardware write protection of the memory. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | D | input | Serial data input of the SPI bus. |
| 6 | C | input | Serial clock input of the SPI bus, with a maximum frequency of 10 MHz for VCC ≥ 2.5 V and 5 MHz for VCC ≥ 1.8 V. |
| 7 | HOLD | input | Hold input; communication with the device can be interrupted when HOLD is driven low. |
| 8 | VCC | power_in | Supply voltage, 1.8 V to 5.5 V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 (ST TSSOP8) |
| Category | Memory |
| Pins | 8 |
CAD (Adom-generated)
- Symbol:
M95M04-DRDW6TP - Footprint:
Adom_Gen:STMicroelectronics_TSSOP8 - 3D model: generated to fit the land (STEP)
- 3D model files:
m95m04-drdw6tp-etched.step/m95m04-drdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95m04-drdw6tp.step/m95m04-drdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (44 pp, sha256
c3ca0f47a94235f0, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: TSSOP8 land pattern, this part sheet p.37: 1.0 x 0.35 mm pads, pitch 0.65 mm, pad rows 6.0 mm centre-to-centre. Body from the outline p.36: Table TSSOP8 mechanical data: D 2.900/3.000/3.100, E 6.200/6.400/6.600, E1 4.300/4.400/4.500, A 1.200 max, A1 0.050/0.150, b 0.190/0.300, e 0.650. Shared land Adom_Gen:STMicroelectronics_TSSOP8 (ST TSSOP8 - Recommended footprint, M24512 DS6520 Rev 31 p.32 Figure 18 (1.0 x 0.35 pads, 0.65 pitch, 7.0 outer, 2.3 row length)). Task master ruling 2026-11-21: TSSOP/SSOP on the lands drawn and sampled (FAMWAVES samples + renders approved).