component
M95M04-DRDW6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM95M04-DRDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M95M04-DRDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip select; the device is selected when S is driven low, and a falling edge on S is required after power-up before any instruction can start. |
| 2 | Q | output | Serial data output of the SPI bus. |
| 3 | W | input | Write protect input used for hardware write protection of the memory. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | D | input | Serial data input of the SPI bus. |
| 6 | C | input | Serial clock input of the SPI bus, with a maximum frequency of 10 MHz for VCC ≥ 2.5 V and 5 MHz for VCC ≥ 1.8 V. |
| 7 | HOLD | input | Hold input; communication with the device can be interrupted when HOLD is driven low. |
| 8 | VCC | power_in | Supply voltage, 1.8 V to 5.5 V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95M04-DRDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m95m04-drdw6tp-etched.step/m95m04-drdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95m04-drdw6tp.step/m95m04-drdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (44 pp, sha256
c3ca0f47a94235f0, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).