main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs m95m04-drdw6tp: rebuilt as a full factory component page (was a placeholder) · Ray
viewers m95m04-drdw6tp: viewers · Ray
m95m04-drdw6tp-etched.fit.json m95m04-drdw6tp: one-pass backfill (courtyard 21.24 -> 19.29 mm2 (margin 0.25, default), re-etched) · Ray
m95m04-drdw6tp-etched.glb m95m04-drdw6tp: rebuilt as a full factory component page (was a placeholder) · Ray
m95m04-drdw6tp-etched.step m95m04-drdw6tp: rebuilt as a full factory component page (was a placeholder) · Ray
m95m04-drdw6tp-hero.glb Publish 0.2.0 · Ray
m95m04-drdw6tp-hero.overlay.json Publish 0.2.0 · Ray
m95m04-drdw6tp.glb Publish 0.2.0 · Ray
m95m04-drdw6tp.kicad_mod Publish 0.2.0 · Ray
m95m04-drdw6tp.kicad_sym Publish 0.1.0 · Ray
m95m04-drdw6tp.lbr Publish 0.2.0 · Ray
m95m04-drdw6tp.step Publish 0.2.0 · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md m95m04-drdw6tp: restore what the land rebuild dropped (pin provenance and claim, lifecycles, notes, description) · Ray

M95M04-DRDW6TP

STMicroelectronics · EEPROM · TSSOP-8 (ST TSSOP8)

M95M04-DRDW6TP from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 S input Chip select; the device is selected when S is driven low, and a falling edge on S is required after power-up before any instruction can start.
2 Q output Serial data output of the SPI bus.
3 W input Write protect input used for hardware write protection of the memory.
4 VSS power_in Ground reference for the device.
5 D input Serial data input of the SPI bus.
6 C input Serial clock input of the SPI bus, with a maximum frequency of 10 MHz for VCC ≥ 2.5 V and 5 MHz for VCC ≥ 1.8 V.
7 HOLD input Hold input; communication with the device can be interrupted when HOLD is driven low.
8 VCC power_in Supply voltage, 1.8 V to 5.5 V operating range.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8 (ST TSSOP8)
Category Memory
Pins 8

CAD (Adom-generated)

  • Symbol: M95M04-DRDW6TP
  • Footprint: Adom_Gen:STMicroelectronics_TSSOP8
  • 3D model: generated to fit the land (STEP)
  • 3D model files: m95m04-drdw6tp-etched.step / m95m04-drdw6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95m04-drdw6tp.step / m95m04-drdw6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (44 pp, sha256 c3ca0f47a94235f0, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: TSSOP8 land pattern, this part sheet p.37: 1.0 x 0.35 mm pads, pitch 0.65 mm, pad rows 6.0 mm centre-to-centre. Body from the outline p.36: Table TSSOP8 mechanical data: D 2.900/3.000/3.100, E 6.200/6.400/6.600, E1 4.300/4.400/4.500, A 1.200 max, A1 0.050/0.150, b 0.190/0.300, e 0.650. Shared land Adom_Gen:STMicroelectronics_TSSOP8 (ST TSSOP8 - Recommended footprint, M24512 DS6520 Rev 31 p.32 Figure 18 (1.0 x 0.35 pads, 0.65 pitch, 7.0 outer, 2.3 row length)). Task master ruling 2026-11-21: TSSOP/SSOP on the lands drawn and sampled (FAMWAVES samples + renders approved).

Datasheet PDF