component
INA190A3IDDFR
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA190A3IDDFR
Texas Instruments · Current Sense Amplifiers · TSOT-23-8
INA190A3IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Analog power supply, 1.7 V to 5.5 V. |
| 2 | ENABLE | input | Enable control pin; when driven to VS the device is enabled as a current sense amplifier, when driven to GND the device is disabled with reduced supply current and output placed in high-impedance state. |
| 3 | REF | input | Reference input enabling bidirectional current sensing with externally applied offset voltage. |
| 4 | GND | power_in | Analog ground. |
| 5 | OUT | output | Analog output providing the gained voltage difference from IN+ to IN- offset by the voltage applied to REF. |
| 6 | NC | unconnected | Not internally connected; either float or connect to any voltage between GND and VS. |
| 7 | IN+ | input | Current-sense amplifier positive input; connect to bus voltage side of sense resistor for high-side sensing or load side for low-side sensing. |
| 8 | IN- | input | Current-sense amplifier negative input; connect to load side of sense resistor for high-side sensing or ground side for low-side sensing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
INA190A3IDDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina190a3iddfr-etched.step/ina190a3iddfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina190a3iddfr.step/ina190a3iddfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
38a7102701707c17, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).