Generated by kicad-footprint-generator · KiCad file format 20260206
INA190A3IDDFR
Texas Instruments · Current Sense Amplifiers · TSOT-23-8
INA190A3IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Analog power supply, 1.7 V to 5.5 V. |
| 2 | ENABLE | input | Enable control pin; when driven to VS the device is enabled as a current sense amplifier, when driven to GND the device is disabled with reduced supply current and output placed in high-impedance state. |
| 3 | REF | input | Reference input enabling bidirectional current sensing with externally applied offset voltage. |
| 4 | GND | power_in | Analog ground. |
| 5 | OUT | output | Analog output providing the gained voltage difference from IN+ to IN- offset by the voltage applied to REF. |
| 6 | NC | unconnected | Not internally connected; either float or connect to any voltage between GND and VS. |
| 7 | IN+ | input | Current-sense amplifier positive input; connect to bus voltage side of sense resistor for high-side sensing or load side for low-side sensing. |
| 8 | IN- | input | Current-sense amplifier negative input; connect to load side of sense resistor for high-side sensing or ground side for low-side sensing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 6 | V | 4 | |||
| Differential analog input voltage | (VIN+) – (VIN–) | -42 | 42 | V | 4 | ||
| Analog input voltage with respect to GND | VIN+, VIN– | -0.3 | 42 | V | With respect to GND | 4 | |
| ENABLE pin voltage | VENABLE | -0.3 | 6 | V | With respect to GND | 4 | |
| REF, OUT pin voltage | REF, OUT | -0.3 | 0.3 | V | Max is (VS) + 0.3 V; min is GND – 0.3 V | 4 | |
| Input current into any pin | 5 | mA | 4 | ||||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range | VCM | -0.2 | 40 | V | Printed as GND – 0.2 to 40 V | 4 | |
| Input pin voltage range | VIN+, VIN– | -0.2 | 40 | V | Printed as GND – 0.2 to 40 V | 4 | |
| Operating supply voltage | VS | 1.7 | 5.5 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Common-mode rejection ratio | CMRR | 132 | 150 | dB | VSENSE = 0 mV, VIN+ = –0.1 V to 40 V, TA = –40°C to +125°C | 5 | |
| Offset voltage, RTI | VOS | -15 | -3 | 15 | µV | VS = 1.8 V, VSENSE = 0 mV | 5 |
| Offset drift, RTI | dVOS/dT | 10 | 80 | nV/°C | VSENSE = 0 mV, TA = –40°C to +125°C | 5 | |
| Power-supply rejection ratio, RTI | PSRR | -5 | -1 | 5 | µV/V | VSENSE = 0 mV, VS = 1.7 V to 5.5 V | 5 |
| Input bias current | IIB | 0.5 | 3 | nA | VSENSE = 0 mV | 5 | |
| Input offset current | IIO | -0.07 | 0.07 | nA | VSENSE = 0 mV | 5 | |
| Gain error (A2, A3, A4 devices) | EG | -0.3 | -0.06 | 0.3 | % | VOUT = 0.1 V to VS – 0.1 V | 5 |
| Gain error drift | 2 | 7 | ppm/°C | TA = –40°C to +125°C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.1 V to VS – 0.1 V | 5 | ||
| Reference voltage rejection ratio (A3 devices) | RVRR | -4 | 0.5 | 4 | µV/V | VREF = 100 mV to VS – 100 mV, TA = –40°C to +125°C | 5 |
| Maximum capacitive load | 1 | nF | No sustained oscillation | 5 | |||
| Swing to VS power-supply rail (offset from VS) | VSP | -20 | -40 | mV | VS = 1.8 V, RL = 10 kΩ to GND, TA = –40°C to +125°C | 5 | |
| Swing to GND (offset from GND) | VSN | 0.05 | 1 | mV | VS = 1.8 V, RL = 10 kΩ to GND, TA = –40°C to +125°C, VSENSE = –10 mV, VREF = 0 V | 5 | |
| Zero current output voltage (A1, A2, A3 devices, offset from GND) | VZL | 1 | 3 | mV | VS = 1.8 V, RL = 10 kΩ to GND, TA = –40°C to +125°C, VSENSE = 0 mV, VREF = 0 V | 5 | |
| Leakage input current (ENABLE) | IEN | 1 | 100 | nA | 0 V ≤ VENABLE ≤ VS | 6 | |
| High-level input voltage (ENABLE) | VIH | 0.7 | 6 | V | Printed min as 0.7 × VS; max 6 V | 6 | |
| Low-level input voltage (ENABLE) | VIL | 0 | 0.3 | × VS | Printed as 0 and 0.3 × VS | 6 | |
| Output leakage, disabled | IODIS | 1 | 5 | µA | VS = 5.0 V, VOUT = 0 V to 5.0 V, VENABLE = 0 V | 6 | |
| Quiescent current | IQ | 48 | 65 | µA | VS = 1.8 V, VSENSE = 0 mV | 6 | |
| Quiescent current over temperature | IQ | 90 | µA | VS = 1.8 V, VSENSE = 0 mV, TA = –40°C to +125°C | 6 | ||
| Quiescent current, disabled | IQDIS | 10 | 100 | nA | VENABLE = 0 V, VSENSE = 0 mV | 6 | |
| Junction-to-ambient thermal resistance (DDF, SOT-23) | RθJA | 170.7 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DDF, SOT-23) | RθJC(top) | 132.7 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DDF, SOT-23) | RθJB | 65.3 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DDF, SOT-23) | ΨJT | 45.7 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DDF, SOT-23) | ΨJB | 65.2 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
INA190A3IDDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina190a3iddfr-etched.step/ina190a3iddfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina190a3iddfr.step/ina190a3iddfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
38a7102701707c17, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).