Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS650532RGER

Texas Instruments · DC-DC Converters · VQFN-24-EP(4x4)

TPS650532RGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Power supply for digital and analog circuitry; must be connected to the same voltage supply as VINDCDC1/2.
2 VINLDO1 power_in Input voltage for LDO1; recommended operating range 1.5 V to 6.5 V.
3 VLDO1 power_out Output voltage of LDO1; externally adjustable from 1 V to 3.6 V with maximum output current of 400 mA.
4 FB_LDO1 input Feedback input for external voltage divider to adjust VLDO1 output voltage.
5 THRESHOLD input Reset threshold input; voltage exceeding 1 V triggers 100 ms delayed reset pulse.
6 FB_LDO2 input Feedback input for external voltage divider to adjust VLDO2 output voltage.
7 VLDO2 power_out Output voltage of LDO2; externally adjustable from 1 V to 3.6 V with maximum output current of 200 mA.
8 VINLDO2/3 power_in Input voltage for LDO2 and LDO3; recommended operating range 1.5 V to 6.5 V.
9 VLDO3 power_out Output voltage of LDO3; fixed at 1.5 V for TPS650532 variant with maximum output current of 200 mA.
10 RESET tri_state Open-drain active-low reset output with 100 ms reset delay time and 1 mA sink current capability.
11 EN_LDO2 input Enable input for LDO2; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor.
12 EN_LDO3 input Enable input for LDO3; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor.
13 FB_DCDC2 input Feedback input to adjust output voltage of DCDC2 between 0.6 V and VIN using external resistor divider.
14 PGND2 power_in Ground pin for converter 2; connect to AGND, PowerPAD, and main ground plane.
15 L2 output Switch pin of converter 2 operating at 2.25 MHz; connected to external inductor (1.5 μH to 2.2 μH) for DC-DC converter 2.
16 VINDCDC1/2 power_in Input voltage for DCDC1 and DCDC2 step-down converters; range 2.5 V to 6 V; must be connected to same supply as VCC.
17 L1 output Switch pin of converter 1 operating at 2.25 MHz; connected to external inductor (1.5 μH to 2.2 μH) for DC-DC converter 1.
18 PGND1 power_in Ground pin for converter 1; connect to AGND, PowerPAD, and main ground plane.
19 FB_DCDC1 input Feedback input to adjust output voltage of DCDC1 between 0.6 V and VIN using external resistor divider.
20 EN_DCDC1 input Enable input for converter 1; active high enables DC-DC conversion with soft start.
21 EN_DCDC2 input Enable input for converter 2; active high enables DC-DC conversion with soft start.
22 EN_LDO1 input Enable input for LDO1; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor.
23 MODE input Mode selection pin for both converters; low selects Power Save Mode with PFM at light loads, high selects forced PWM mode.
24 AGND power_in Analog ground; connect to PGND1, PGND2, PowerPAD, and main ground plane.
25 PowerPAD power_in Exposed thermal pad for thermal dissipation and ground connection; must be soldered to PCB ground plane.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-24-EP(4x4)
Category Power Management (PMIC)
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage on all pins except AGND, PGND, EN_LDO1 (with respect to AGND) VI -0.3 7 V 5
Input voltage on EN_LDO1 pin (with respect to AGND) VI -0.3 V max printed as Vcc + 0.5 V 5
Current at VINDCDC1/2, L1, PGND1, L2, PGND2 II 1800 mA 5
Current at all other pins II 1000 mA 5
Output voltage for LDO1, LDO2 and LDO3 VO -0.3 4 V 5
Operating free-air temperature TA -40 85 °C 5
Maximum junction temperature TJ 125 °C 5
Storage temperature Tstg -65 150 °C 5
Input voltage range for step-down converters VINDCDC1/2 2.5 6 V 5
Output voltage range for VDCDC1 step-down converter (externally adjustable) VDCDC1 0.6 V max printed as VINDCDC1 5
Output voltage range for VDCDC2 step-down converter (externally adjustable) VDCDC2 0.6 V max printed as VINDCDC2 5
Input voltage range for LDOs VINLDO1, VINLDO2/3 1.5 6.5 V 5
Output voltage range for LDO1 and LDO2 (externally adjustable versions) 1 3.6 V 5
Inductor at L1 L1 1.5 2.2 μH 5
Output capacitor at VDCDC1 COUTDCDC1 10 22 μF 5
Inductor at L2 L2 1.5 2.2 μH 6
Output capacitor at VDCDC2 COUTDCDC2 10 22 μF 6
Operating ambient temperature range TA -40 85 °C 6
Operating junction temperature range TJ -40 125 °C 6
Resistor from battery voltage to VCC used for filtering RCC 1 10 Ω 6
Input v quiescent current: one converter, PFM, device not switching 20 30 μA One converter, IOUT = 0 mA, PFM mode enabled (Mode = GND); EN_DCDC1 = Vin OR EN_DCDC2 = Vin; EN_LDO1 = EN_LDO2 = EN_LDO3 = GND 7
Vcc input voltage range 2.5 6 V 7
Operating quiescent current (two converters, PFM) IQ 32 40 μA Two converters, IOUT = 0 mA, PFM mode enabled (Mode = 0), device not switching; EN_DCDC1 = Vin AND EN_DCDC2 = Vin; EN_LDO1 = EN_LDO2 = EN_LDO3 = GND 7
Quiescent current: one converter, PFM, LDOs enabled 145 210 μA One converter, IOUT = 0 mA, PFM (Mode = GND), device not switching; EN_DCDC1 = Vin OR EN_DCDC2 = Vin; EN_LDO1 = EN_LDO2 = EN_LDO3 = Vin 7
Shutdown current I(SD) 9 12 μA EN_DCDC1 = EN_DCDC2 = GND; EN_LDO1 = EN_LDO2 = EN_LDO3 = GND 7
Undervoltage lockout threshold for DCDC converters and LDOs DCDC UVLO 1.8 2 V Voltage at VCC 7
High-level input voltage VIH 1.2 V max printed as VCC; applies to MODE, EN_DCDC1, EN_DCDC2, EN_LDO1, EN_LDO2, EN_LDO3 7
Low-level input voltage VIL 0 0.4 V applies to MODE, EN_DCDC1, EN_DCDC2, EN_LDO1, EN_LDO2, EN_LDO3 7
Input bias current IIN 0.01 1 μA MODE = GND or VIN 7
High-side P-channel MOSFET on-resistance (DCDC1, TPS650532 row) rDS(on) 280 630 mΩ VINDCDC1/2 = 3.6 V 7
Low-side N-channel MOSFET on-resistance (DCDC1, TPS650532 row) rDS(on) 220 450 mΩ VINDCDC1/2 = 3.6 V 7
P-channel leakage current ILD_PMOS 1 μA V(DS) = 6 V 7
N-channel leakage current ILK_NMOS 7 10 μA V(DS) = 6 V 7
DCDC1 forward current limit (TPS650532) I(LIMF) 1.19 1.4 1.65 A 2.5 V ≤ VIN ≤ 6 V; PMOS (High-Side) and NMOS (Low side) 7
DCDC2 forward current limit (TPS650532) I(LIMF) 1.19 1.4 1.65 A 2.5 V ≤ VIN ≤ 6 V; PMOS (High-Side) and NMOS (Low side) 7
Oscillator frequency fSW 2.025 2.25 2.475 MHz 8
Output voltage range for externally adjustable versions VOUT 0.6 V max printed as VIN 8
DC output voltage accuracy DCDC1 (PFM) VOUT accuracy -2 0 2 % VIN = 2.5 V to 6 V, Mode = GND, PFM operation, 0 mA < IOUT < IOUTMAX 8
DC output voltage accuracy DCDC2 (PWM) VOUT accuracy -1 0 1 % VIN = 2.5 V to 6 V, Mode = VIN, PWM operation, 0 mA < IOUT < IOUTMAX 8
RESET delay time 80 100 120 ms Input voltage at threshold pin rising 8
RESET output low voltage VOL 0.2 V IOL = 1 mA, Vthreshold < 1 V 8
RESET output leakage current 10 nA Vthreshold > 1 V (TPS650532) 8
Threshold voltage (falling) Vth 0.98 1 1.02 V Vth falling voltage 8
Input voltage range for LDO1, LDO2, LDO3 VINLDO 1.5 6.5 V 8
LDO1 output voltage range (TPS650532) 1 3.6 V 8
LDO2 output voltage range (TPS650532) 1 3.6 V 8
Maximum output current for LDO1 IO 400 mA 8
Maximum output current for LDO2, LDO3 IO 200 mA 8
LDO1 short-circuit current limit I(SC) 850 mA VLDO1 = GND 8
LDO2 & LDO3 short-circuit current limit I(SC) 420 mA VLDO2 = GND, VLDO3 = GND 8
Dropout voltage at LDO1 280 mV IO = 400 mA, VINLDO1 = 1.8 V 8
Dropout voltage at LDO2, LDO3 280 mV IO = 200 mA, VINLDO2/3 = 1.8 V 8
Output voltage accuracy for LDO1, LDO2, LDO3 -2 1 % IO = 10 mA 8
Line regulation for LDO1, LDO2, LDO3 -1 1 % VINLDO1,2 = VLDO1,2 + 0.5 V (min. 2.5 V) to 6.5 V, IO = 10 mA 8
Load regulation for LDO1, LDO2, LDO3 -1 1 % IO = 0 mA to 400 mA for LDO1; IO = 0 mA to 200 mA for LDO2, LDO3 8
Junction-to-ambient thermal resistance (VQFN-24, 4.00 mm x 4.00 mm) RθJA 31.4 °C/W 6
Junction-to-case (top) thermal resistance RθJC(top) 29 °C/W 6
Junction-to-board thermal resistance RθJB 8.2 °C/W 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.6 °C/W 6
Junction-to-ambient thermal resistance (dissipation ratings, RGE package) RθJA 35 K/W RGE package, dissipation ratings table 6

CAD (KiCad official)

  • Symbol: TPS650532RGER
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: tps650532rger-etched.step / tps650532rger-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps650532rger.step / tps650532rger.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 15a78f62021d882e, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF