Generated by kicad-footprint-generator · KiCad file format 20260206
TPS650532RGER
Texas Instruments · DC-DC Converters · VQFN-24-EP(4x4)
TPS650532RGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply for digital and analog circuitry; must be connected to the same voltage supply as VINDCDC1/2. |
| 2 | VINLDO1 | power_in | Input voltage for LDO1; recommended operating range 1.5 V to 6.5 V. |
| 3 | VLDO1 | power_out | Output voltage of LDO1; externally adjustable from 1 V to 3.6 V with maximum output current of 400 mA. |
| 4 | FB_LDO1 | input | Feedback input for external voltage divider to adjust VLDO1 output voltage. |
| 5 | THRESHOLD | input | Reset threshold input; voltage exceeding 1 V triggers 100 ms delayed reset pulse. |
| 6 | FB_LDO2 | input | Feedback input for external voltage divider to adjust VLDO2 output voltage. |
| 7 | VLDO2 | power_out | Output voltage of LDO2; externally adjustable from 1 V to 3.6 V with maximum output current of 200 mA. |
| 8 | VINLDO2/3 | power_in | Input voltage for LDO2 and LDO3; recommended operating range 1.5 V to 6.5 V. |
| 9 | VLDO3 | power_out | Output voltage of LDO3; fixed at 1.5 V for TPS650532 variant with maximum output current of 200 mA. |
| 10 | RESET | tri_state | Open-drain active-low reset output with 100 ms reset delay time and 1 mA sink current capability. |
| 11 | EN_LDO2 | input | Enable input for LDO2; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor. |
| 12 | EN_LDO3 | input | Enable input for LDO3; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor. |
| 13 | FB_DCDC2 | input | Feedback input to adjust output voltage of DCDC2 between 0.6 V and VIN using external resistor divider. |
| 14 | PGND2 | power_in | Ground pin for converter 2; connect to AGND, PowerPAD, and main ground plane. |
| 15 | L2 | output | Switch pin of converter 2 operating at 2.25 MHz; connected to external inductor (1.5 μH to 2.2 μH) for DC-DC converter 2. |
| 16 | VINDCDC1/2 | power_in | Input voltage for DCDC1 and DCDC2 step-down converters; range 2.5 V to 6 V; must be connected to same supply as VCC. |
| 17 | L1 | output | Switch pin of converter 1 operating at 2.25 MHz; connected to external inductor (1.5 μH to 2.2 μH) for DC-DC converter 1. |
| 18 | PGND1 | power_in | Ground pin for converter 1; connect to AGND, PowerPAD, and main ground plane. |
| 19 | FB_DCDC1 | input | Feedback input to adjust output voltage of DCDC1 between 0.6 V and VIN using external resistor divider. |
| 20 | EN_DCDC1 | input | Enable input for converter 1; active high enables DC-DC conversion with soft start. |
| 21 | EN_DCDC2 | input | Enable input for converter 2; active high enables DC-DC conversion with soft start. |
| 22 | EN_LDO1 | input | Enable input for LDO1; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor. |
| 23 | MODE | input | Mode selection pin for both converters; low selects Power Save Mode with PFM at light loads, high selects forced PWM mode. |
| 24 | AGND | power_in | Analog ground; connect to PGND1, PGND2, PowerPAD, and main ground plane. |
| 25 | PowerPAD | power_in | Exposed thermal pad for thermal dissipation and ground connection; must be soldered to PCB ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | Power Management (PMIC) |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage on all pins except AGND, PGND, EN_LDO1 (with respect to AGND) | VI | -0.3 | 7 | V | 5 | ||
| Input voltage on EN_LDO1 pin (with respect to AGND) | VI | -0.3 | V | max printed as Vcc + 0.5 V | 5 | ||
| Current at VINDCDC1/2, L1, PGND1, L2, PGND2 | II | 1800 | mA | 5 | |||
| Current at all other pins | II | 1000 | mA | 5 | |||
| Output voltage for LDO1, LDO2 and LDO3 | VO | -0.3 | 4 | V | 5 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| Maximum junction temperature | TJ | 125 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Input voltage range for step-down converters | VINDCDC1/2 | 2.5 | 6 | V | 5 | ||
| Output voltage range for VDCDC1 step-down converter (externally adjustable) | VDCDC1 | 0.6 | V | max printed as VINDCDC1 | 5 | ||
| Output voltage range for VDCDC2 step-down converter (externally adjustable) | VDCDC2 | 0.6 | V | max printed as VINDCDC2 | 5 | ||
| Input voltage range for LDOs | VINLDO1, VINLDO2/3 | 1.5 | 6.5 | V | 5 | ||
| Output voltage range for LDO1 and LDO2 (externally adjustable versions) | 1 | 3.6 | V | 5 | |||
| Inductor at L1 | L1 | 1.5 | 2.2 | μH | 5 | ||
| Output capacitor at VDCDC1 | COUTDCDC1 | 10 | 22 | μF | 5 | ||
| Inductor at L2 | L2 | 1.5 | 2.2 | μH | 6 | ||
| Output capacitor at VDCDC2 | COUTDCDC2 | 10 | 22 | μF | 6 | ||
| Operating ambient temperature range | TA | -40 | 85 | °C | 6 | ||
| Operating junction temperature range | TJ | -40 | 125 | °C | 6 | ||
| Resistor from battery voltage to VCC used for filtering | RCC | 1 | 10 | Ω | 6 | ||
| Input v quiescent current: one converter, PFM, device not switching | 20 | 30 | μA | One converter, IOUT = 0 mA, PFM mode enabled (Mode = GND); EN_DCDC1 = Vin OR EN_DCDC2 = Vin; EN_LDO1 = EN_LDO2 = EN_LDO3 = GND | 7 | ||
| Vcc input voltage range | 2.5 | 6 | V | 7 | |||
| Operating quiescent current (two converters, PFM) | IQ | 32 | 40 | μA | Two converters, IOUT = 0 mA, PFM mode enabled (Mode = 0), device not switching; EN_DCDC1 = Vin AND EN_DCDC2 = Vin; EN_LDO1 = EN_LDO2 = EN_LDO3 = GND | 7 | |
| Quiescent current: one converter, PFM, LDOs enabled | 145 | 210 | μA | One converter, IOUT = 0 mA, PFM (Mode = GND), device not switching; EN_DCDC1 = Vin OR EN_DCDC2 = Vin; EN_LDO1 = EN_LDO2 = EN_LDO3 = Vin | 7 | ||
| Shutdown current | I(SD) | 9 | 12 | μA | EN_DCDC1 = EN_DCDC2 = GND; EN_LDO1 = EN_LDO2 = EN_LDO3 = GND | 7 | |
| Undervoltage lockout threshold for DCDC converters and LDOs | DCDC UVLO | 1.8 | 2 | V | Voltage at VCC | 7 | |
| High-level input voltage | VIH | 1.2 | V | max printed as VCC; applies to MODE, EN_DCDC1, EN_DCDC2, EN_LDO1, EN_LDO2, EN_LDO3 | 7 | ||
| Low-level input voltage | VIL | 0 | 0.4 | V | applies to MODE, EN_DCDC1, EN_DCDC2, EN_LDO1, EN_LDO2, EN_LDO3 | 7 | |
| Input bias current | IIN | 0.01 | 1 | μA | MODE = GND or VIN | 7 | |
| High-side P-channel MOSFET on-resistance (DCDC1, TPS650532 row) | rDS(on) | 280 | 630 | mΩ | VINDCDC1/2 = 3.6 V | 7 | |
| Low-side N-channel MOSFET on-resistance (DCDC1, TPS650532 row) | rDS(on) | 220 | 450 | mΩ | VINDCDC1/2 = 3.6 V | 7 | |
| P-channel leakage current | ILD_PMOS | 1 | μA | V(DS) = 6 V | 7 | ||
| N-channel leakage current | ILK_NMOS | 7 | 10 | μA | V(DS) = 6 V | 7 | |
| DCDC1 forward current limit (TPS650532) | I(LIMF) | 1.19 | 1.4 | 1.65 | A | 2.5 V ≤ VIN ≤ 6 V; PMOS (High-Side) and NMOS (Low side) | 7 |
| DCDC2 forward current limit (TPS650532) | I(LIMF) | 1.19 | 1.4 | 1.65 | A | 2.5 V ≤ VIN ≤ 6 V; PMOS (High-Side) and NMOS (Low side) | 7 |
| Oscillator frequency | fSW | 2.025 | 2.25 | 2.475 | MHz | 8 | |
| Output voltage range for externally adjustable versions | VOUT | 0.6 | V | max printed as VIN | 8 | ||
| DC output voltage accuracy DCDC1 (PFM) | VOUT accuracy | -2 | 0 | 2 | % | VIN = 2.5 V to 6 V, Mode = GND, PFM operation, 0 mA < IOUT < IOUTMAX | 8 |
| DC output voltage accuracy DCDC2 (PWM) | VOUT accuracy | -1 | 0 | 1 | % | VIN = 2.5 V to 6 V, Mode = VIN, PWM operation, 0 mA < IOUT < IOUTMAX | 8 |
| RESET delay time | 80 | 100 | 120 | ms | Input voltage at threshold pin rising | 8 | |
| RESET output low voltage | VOL | 0.2 | V | IOL = 1 mA, Vthreshold < 1 V | 8 | ||
| RESET output leakage current | 10 | nA | Vthreshold > 1 V (TPS650532) | 8 | |||
| Threshold voltage (falling) | Vth | 0.98 | 1 | 1.02 | V | Vth falling voltage | 8 |
| Input voltage range for LDO1, LDO2, LDO3 | VINLDO | 1.5 | 6.5 | V | 8 | ||
| LDO1 output voltage range (TPS650532) | 1 | 3.6 | V | 8 | |||
| LDO2 output voltage range (TPS650532) | 1 | 3.6 | V | 8 | |||
| Maximum output current for LDO1 | IO | 400 | mA | 8 | |||
| Maximum output current for LDO2, LDO3 | IO | 200 | mA | 8 | |||
| LDO1 short-circuit current limit | I(SC) | 850 | mA | VLDO1 = GND | 8 | ||
| LDO2 & LDO3 short-circuit current limit | I(SC) | 420 | mA | VLDO2 = GND, VLDO3 = GND | 8 | ||
| Dropout voltage at LDO1 | 280 | mV | IO = 400 mA, VINLDO1 = 1.8 V | 8 | |||
| Dropout voltage at LDO2, LDO3 | 280 | mV | IO = 200 mA, VINLDO2/3 = 1.8 V | 8 | |||
| Output voltage accuracy for LDO1, LDO2, LDO3 | -2 | 1 | % | IO = 10 mA | 8 | ||
| Line regulation for LDO1, LDO2, LDO3 | -1 | 1 | % | VINLDO1,2 = VLDO1,2 + 0.5 V (min. 2.5 V) to 6.5 V, IO = 10 mA | 8 | ||
| Load regulation for LDO1, LDO2, LDO3 | -1 | 1 | % | IO = 0 mA to 400 mA for LDO1; IO = 0 mA to 200 mA for LDO2, LDO3 | 8 | ||
| Junction-to-ambient thermal resistance (VQFN-24, 4.00 mm x 4.00 mm) | RθJA | 31.4 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 29 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 8.2 | °C/W | 6 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 1.6 | °C/W | 6 | |||
| Junction-to-ambient thermal resistance (dissipation ratings, RGE package) | RθJA | 35 | K/W | RGE package, dissipation ratings table | 6 |
CAD (KiCad official)
- Symbol:
TPS650532RGER - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
tps650532rger-etched.step/tps650532rger-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps650532rger.step/tps650532rger.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
15a78f62021d882e, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).