Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32H743VIT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

STM32H743VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, QUADSPI_BK1_IO2 and FMC_A23.
2 PE3 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B and FMC_A19.
3 PE4 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, SAI1_D2, SPI4_NSS, DCMI_D4 and LCD_B0.
4 PE5 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, DCMI_D6 and LCD_G0.
5 PE6 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, SPI4_MOSI, DCMI_D7 and LCD_G1.
6 VBAT power_in Backup/battery supply for the VBAT domain (RTC/LSE, backup registers), with battery charging capability; external supply must stay within the 4.0 V absolute maximum.
7 PC13 bidirectional 5 V-tolerant I/O (FT); additional functions RTC_TAMP1, RTC_TS and WKUP2; EVENTOUT alternate function.
8 PC14-OSC32_IN bidirectional 5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator input OSC32_IN.
9 PC15-OSC32_OUT bidirectional 5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator output OSC32_OUT.
10 VSS power_in Ground pin; all VSS pins must be connected to the external ground.
11 VDD power_in Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V.
12 PH0-OSC_IN bidirectional 5 V-tolerant I/O (FT); HSE oscillator input OSC_IN for the 4-48 MHz external oscillator.
13 PH1-OSC_OUT bidirectional 5 V-tolerant I/O (FT); HSE oscillator output OSC_OUT for the 4-48 MHz external oscillator.
14 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
15 PC0 bidirectional 5 V-tolerant I/O with analog option supplied by VDDA (FT_a); ADC123_INP10 additional function; alternate functions include DFSDM1_CKIN0, SAI2_FS_B, OTG_HS_ULPI_STP and FMC_SDNWE.
16 PC1 bidirectional 5 V-tolerant I/O (FT_ha); ADC123_INP11/ADC123_INN10 and RTC_TAMP3/WKUP5 additional functions; alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO and ETH_MDC.
17 PC2_C passive Analog pad (Pxy_C) connected to PC2 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INN1 and ADC3_INP0 additional functions.
18 PC3_C passive Analog pad (Pxy_C) connected to PC3 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INP1 additional function.
19 VSSA power_in Ground for the analog domain (ADC, DAC, OPAMP, COMP and reference).
20 VREF+ power_in Positive reference voltage input for the ADC/DAC analog peripherals; available on this package.
21 VDDA power_in Analog supply: 1.62 V to 3.6 V when ADC or COMP is used (1.8 V minimum for DAC, 2.0 V for OPAMP, 1.8 V for VREFBUF).
22 PA0 bidirectional 5 V-tolerant I/O with analog option (FT_a); ADC1_INP16 and WKUP0 additional functions; alternate functions include TIM2_CH1/TIM2_ETR, USART2_CTS, UART4_TX and ETH_MII_CRS.
23 PA1 bidirectional 5 V-tolerant I/O (FT_ha); ADC1_INN16/ADC1_INP17 additional functions; alternate functions include TIM2_CH2, USART2_RTS, UART4_RX and ETH_MII_RX_CLK.
24 PA2 bidirectional 5 V-tolerant I/O with analog option (FT_a); ADC12_INP14 and WKUP1 additional functions; alternate functions include TIM2_CH3, USART2_TX and ETH_MDIO.
25 PA3 bidirectional 5 V-tolerant I/O (FT_ha); ADC12_INP15 additional function; alternate functions include TIM2_CH4, USART2_RX, OTG_HS_ULPI_D0 and ETH_MII_COL.
26 VSS power_in Ground pin; all VSS pins must be connected to the external ground.
27 VDD power_in Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V.
28 PA4 bidirectional 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP18 and DAC1_OUT1 additional functions; alternate functions include D1PWREN, SPI1_NSS/I2S1_WS, USART2_CK and DCMI_HSYNC.
29 PA5 bidirectional 3.3 V-tolerant I/O (TT_ha); ADC12_INN18/ADC12_INP19 and DAC1_OUT2 additional functions; alternate functions include D2PWREN, TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK and OTG_HS_ULPI_CK.
30 PA6 bidirectional 5 V-tolerant I/O with analog option (FT_a); ADC12_INP3 additional function; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and DCMI_PIXCLK.
31 PA7 bidirectional 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN3, ADC12_INP7 and OPAMP1_VINM additional functions; alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SDO and FMC_SDNWE.
32 PC4 bidirectional 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP4, OPAMP1_VOUT and COMP1_INM additional functions; alternate functions include DFSDM1_CKIN2, I2S1_MCK and ETH_MII_RXD0.
33 PC5 bidirectional 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN4, ADC12_INP8 and OPAMP1_VINM additional functions; alternate functions include SAI1_D3, DFSDM1_DATIN2, ETH_MII_RXD1 and COMP1_OUT.
34 PB0 bidirectional 5 V-tolerant I/O with analog option (FT_a); ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP additional functions; alternate functions include TIM1_CH2N, TIM3_CH3, OTG_HS_ULPI_D1 and ETH_MII_RXD2.
35 PB1 bidirectional 3.3 V-tolerant I/O with USB option (TT_u, supplied by VDD33USB); ADC12_INP5 and COMP1_INM additional functions; alternate functions include TIM1_CH3N, TIM3_CH4, OTG_HS_ULPI_D2 and ETH_MII_RXD3.
36 PB2 bidirectional 5 V-tolerant high-speed I/O with analog option (FT_ha); COMP1_INP additional function; alternate functions include RTC_OUT, SAI1_D1, DFSDM1_CKIN1 and QUADSPI_CLK.
37 PE7 bidirectional 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VOUT and COMP2_INM additional functions; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0 and FMC_D4.
38 PE8 bidirectional 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINM additional function; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5 and COMP2_OUT.
39 PE9 bidirectional 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINP and COMP2_INP additional functions; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS/UART7_DE, QUADSPI_BK2_IO2 and FMC_D6.
40 PE10 bidirectional 5 V-tolerant high-speed I/O (FT_ha); COMP2_INM additional function; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3 and FMC_D7.
41 PE11 bidirectional 5 V-tolerant high-speed I/O (FT_ha); COMP2_INP additional function; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_NSS, SAI2_SD_B, FMC_D8 and LCD_G3.
42 PE12 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9, COMP1_OUT and LCD_B4.
43 PE13 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10, COMP2_OUT and LCD_DE.
44 PE14 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11 and LCD_CLK.
45 PE15 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_BKIN, FMC_D12, TIM1_BKIN_COMP12 and LCD_R7.
46 PB10 bidirectional 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH3, HRTIM_SCOUT, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3 and ETH_MII_RX_ER.
47 PB11 bidirectional 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH4, HRTIM_SCIN, LPTIM2_ETR, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4 and ETH_MII_TX_EN.
48 VCAP power_out Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25.
49 VSS power_in Ground pin; all VSS pins must be connected to the external ground.
50 VDD power_in Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V.
51 PB12 bidirectional 5 V-tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and OTG_HS_ID.
52 PB13 bidirectional 5 V-tolerant I/O with USB option (FT_u); OTG_HS_VBUS additional function; alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS, FDCAN2_TX and OTG_HS_ULPI_D6.
53 PB14 bidirectional 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH2N, TIM12_CH1, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and OTG_HS_DM.
54 PB15 bidirectional 5 V-tolerant I/O with USB option (FT_u); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and OTG_HS_DP.
55 PD8 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN3, SAI3_SCK_B, USART3_TX, SPDIFRX1_IN2 and FMC_D13.
56 PD9 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN3, SAI3_SD_B, USART3_RX, FDCAN2_RXFD_MODE and FMC_D14.
57 PD10 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SAI3_FS_B, USART3_CK, FDCAN2_TXFD_MODE, FMC_D15 and LCD_B3.
58 PD11 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A and FMC_A16.
59 PD12 bidirectional 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1 and FMC_A17.
60 PD13 bidirectional 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, QUADSPI_BK1_IO3 and FMC_A18.
61 PD14 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH3, SAI3_MCLK_B, UART8_CTS and FMC_D0.
62 PD15 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH4, SAI3_MCLK_A, UART8_RTS/UART8_DE and FMC_D1.
63 PC6 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_CHA1, TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, FMC_NWAIT and DCMI_D0; SWPMI_IO additional function.
64 PC7 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRGIO, HRTIM_CHA2, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1 and DCMI_D1.
65 PC8 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, HRTIM_CHB1, TIM3_CH3, TIM8_CH3, USART6_CK, FMC_NE2/FMC_NCE, SWPMI_RX and DCMI_D2.
66 PC9 bidirectional 5 V-tolerant I/O with FM+ option (FT_fh); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, UART5_CTS, QUADSPI_BK1_IO0 and SDMMC1_D1.
67 PA8 bidirectional 5 V-tolerant I/O with FM+ option and analog option (FT_fha); alternate functions include MCO1, TIM1_CH1, HRTIM_CHB2, I2C3_SCL, USART1_CK, OTG_FS_SOF and UART7_RX.
68 PA9 bidirectional 5 V-tolerant I/O with USB option (FT_u); OTG_FS_VBUS additional function; alternate functions include TIM1_CH2, HRTIM_CHC1, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX and DCMI_D0.
69 PA10 bidirectional 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH3, HRTIM_CHC2, LPUART1_RX, USART1_RX, OTG_FS_ID, MDIOS_MDIO and DCMI_D1.
70 PA11 bidirectional 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH4, HRTIM_CHD1, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, FDCAN1_RX and OTG_FS_DM.
71 PA12 bidirectional 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_ETR, HRTIM_CHD2, LPUART1_RTS/LPUART1_DE, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS/USART1_DE, FDCAN1_TX and OTG_FS_DP.
72 PA13 bidirectional 5 V-tolerant I/O (FT); default function JTMS-SWDIO (SWD debug data).
73 VCAP power_out Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25.
74 VSS power_in Ground pin; all VSS pins must be connected to the external ground.
75 VDD power_in Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V.
76 PA14 bidirectional 5 V-tolerant I/O (FT); default function JTCK-SWCLK (SWD clock).
77 PA15 bidirectional 5 V-tolerant I/O (FT); default function JTDI; alternate functions include TIM2_CH1/TIM2_ETR, HRTIM_FLT1, CEC, SPI1_NSS/I2S1_WS and UART4_RTS.
78 PC10 bidirectional 5 V-tolerant high-speed I/O (FT_ha); alternate functions include HRTIM_EEV1, DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2 and DCMI_D8.
79 PC11 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT2, DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3 and DCMI_D4.
80 PC12 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, HRTIM_EEV2, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9.
81 PD0 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN6, SAI3_SCK_A, UART4_RX, FDCAN1_RX and FMC_D2.
82 PD1 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN6, SAI3_SD_A, UART4_TX, FDCAN1_TX and FMC_D3.
83 PD2 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD and DCMI_D11.
84 PD3 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5 and LCD_G7.
85 PD4 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT3, SAI3_FS_A, USART2_RTS/USART2_DE, FDCAN1_RXFD_MODE and FMC_NOE.
86 PD5 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_EEV3, USART2_TX, FDCAN1_TXFD_MODE and FMC_NWE.
87 PD6 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include SAI1_D1, DFSDM1_DATIN1, SPI3_MOSI/I2S3_SDO, USART2_RX, FDCAN2_RXFD_MODE, SDMMC2_CK, FMC_NWAIT, DCMI_D10 and LCD_B2.
88 PD7 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN1, SDMMC2_CMD and FMC_NE1.
89 PB3 bidirectional 5 V-tolerant I/O (FT); default function JTDO/TRACESWO; alternate functions include TIM2_CH2, HRTIM_FLT4, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX.
90 PB4 bidirectional 5 V-tolerant I/O (FT); default function NJTRST; alternate functions include TIM16_BKIN, TIM3_CH1, HRTIM_EEV6, SPI1_MISO/I2S1_SDI, SPI3_MISO/I2S3_SDI, SDMMC2_D3 and UART7_TX.
91 PB5 bidirectional 5 V-tolerant I/O (FT); alternate functions include TIM17_BKIN, TIM3_CH2, HRTIM_EEV7, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1 and DCMI_D10.
92 PB6 bidirectional 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, CEC, USART1_TX, LPUART1_TX, FDCAN2_TX, QUADSPI_BK1_NCS and FMC_SDNE1.
93 PB7 bidirectional 5 V-tolerant I/O with FM+ and analog option (FT_fa); PVD_IN additional function; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, USART1_RX, LPUART1_RX, FDCAN2_TXFD_MODE and FMC_NL.
94 BOOT0 input Dedicated BOOT0 boot-mode input; input voltage limited to 9.0 V (VPP additional function).
95 PB8 bidirectional 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, SDMMC1_CKIN, FDCAN1_RX, ETH_MII_TXD3 and DCMI_D6.
96 PB9 bidirectional 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_NSS/I2S2_WS, SDMMC1_CDIR, FDCAN1_TX and DCMI_D7.
97 PE0 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_ETR, TIM4_ETR, HRTIM_SCIN, UART8_RX, FDCAN1_RXFD_MODE, SAI2_MCLK_A, FMC_NBL0 and DCMI_D2.
98 PE1 bidirectional 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_IN2, HRTIM_SCOUT, UART8_TX, FDCAN1_TXFD_MODE, FMC_NBL1 and DCMI_D3.
99 VSS power_in Ground pin; all VSS pins must be connected to the external ground.
100 VDD power_in Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperatures -40 85 °C 21
Junction temperature -40 125 °C 21

CAD (KiCad official)

  • Symbol: STM32H743VIT6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32h743vit6-etched.step / stm32h743vit6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32h743vit6.step / stm32h743vit6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (357 pp, sha256 9c74d2015445f7c3, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF