Generated by kicad-footprint-generator · KiCad file format 20260206
STM32H743VIT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32H743VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, QUADSPI_BK1_IO2 and FMC_A23. |
| 2 | PE3 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B and FMC_A19. |
| 3 | PE4 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, SAI1_D2, SPI4_NSS, DCMI_D4 and LCD_B0. |
| 4 | PE5 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, DCMI_D6 and LCD_G0. |
| 5 | PE6 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, SPI4_MOSI, DCMI_D7 and LCD_G1. |
| 6 | VBAT | power_in | Backup/battery supply for the VBAT domain (RTC/LSE, backup registers), with battery charging capability; external supply must stay within the 4.0 V absolute maximum. |
| 7 | PC13 | bidirectional | 5 V-tolerant I/O (FT); additional functions RTC_TAMP1, RTC_TS and WKUP2; EVENTOUT alternate function. |
| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator input OSC32_IN. |
| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator output OSC32_OUT. |
| 10 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |
| 11 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT); HSE oscillator input OSC_IN for the 4-48 MHz external oscillator. |
| 13 | PH1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT); HSE oscillator output OSC_OUT for the 4-48 MHz external oscillator. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V-tolerant I/O with analog option supplied by VDDA (FT_a); ADC123_INP10 additional function; alternate functions include DFSDM1_CKIN0, SAI2_FS_B, OTG_HS_ULPI_STP and FMC_SDNWE. |
| 16 | PC1 | bidirectional | 5 V-tolerant I/O (FT_ha); ADC123_INP11/ADC123_INN10 and RTC_TAMP3/WKUP5 additional functions; alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO and ETH_MDC. |
| 17 | PC2_C | passive | Analog pad (Pxy_C) connected to PC2 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INN1 and ADC3_INP0 additional functions. |
| 18 | PC3_C | passive | Analog pad (Pxy_C) connected to PC3 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INP1 additional function. |
| 19 | VSSA | power_in | Ground for the analog domain (ADC, DAC, OPAMP, COMP and reference). |
| 20 | VREF+ | power_in | Positive reference voltage input for the ADC/DAC analog peripherals; available on this package. |
| 21 | VDDA | power_in | Analog supply: 1.62 V to 3.6 V when ADC or COMP is used (1.8 V minimum for DAC, 2.0 V for OPAMP, 1.8 V for VREFBUF). |
| 22 | PA0 | bidirectional | 5 V-tolerant I/O with analog option (FT_a); ADC1_INP16 and WKUP0 additional functions; alternate functions include TIM2_CH1/TIM2_ETR, USART2_CTS, UART4_TX and ETH_MII_CRS. |
| 23 | PA1 | bidirectional | 5 V-tolerant I/O (FT_ha); ADC1_INN16/ADC1_INP17 additional functions; alternate functions include TIM2_CH2, USART2_RTS, UART4_RX and ETH_MII_RX_CLK. |
| 24 | PA2 | bidirectional | 5 V-tolerant I/O with analog option (FT_a); ADC12_INP14 and WKUP1 additional functions; alternate functions include TIM2_CH3, USART2_TX and ETH_MDIO. |
| 25 | PA3 | bidirectional | 5 V-tolerant I/O (FT_ha); ADC12_INP15 additional function; alternate functions include TIM2_CH4, USART2_RX, OTG_HS_ULPI_D0 and ETH_MII_COL. |
| 26 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |
| 27 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |
| 28 | PA4 | bidirectional | 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP18 and DAC1_OUT1 additional functions; alternate functions include D1PWREN, SPI1_NSS/I2S1_WS, USART2_CK and DCMI_HSYNC. |
| 29 | PA5 | bidirectional | 3.3 V-tolerant I/O (TT_ha); ADC12_INN18/ADC12_INP19 and DAC1_OUT2 additional functions; alternate functions include D2PWREN, TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK and OTG_HS_ULPI_CK. |
| 30 | PA6 | bidirectional | 5 V-tolerant I/O with analog option (FT_a); ADC12_INP3 additional function; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and DCMI_PIXCLK. |
| 31 | PA7 | bidirectional | 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN3, ADC12_INP7 and OPAMP1_VINM additional functions; alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SDO and FMC_SDNWE. |
| 32 | PC4 | bidirectional | 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP4, OPAMP1_VOUT and COMP1_INM additional functions; alternate functions include DFSDM1_CKIN2, I2S1_MCK and ETH_MII_RXD0. |
| 33 | PC5 | bidirectional | 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN4, ADC12_INP8 and OPAMP1_VINM additional functions; alternate functions include SAI1_D3, DFSDM1_DATIN2, ETH_MII_RXD1 and COMP1_OUT. |
| 34 | PB0 | bidirectional | 5 V-tolerant I/O with analog option (FT_a); ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP additional functions; alternate functions include TIM1_CH2N, TIM3_CH3, OTG_HS_ULPI_D1 and ETH_MII_RXD2. |
| 35 | PB1 | bidirectional | 3.3 V-tolerant I/O with USB option (TT_u, supplied by VDD33USB); ADC12_INP5 and COMP1_INM additional functions; alternate functions include TIM1_CH3N, TIM3_CH4, OTG_HS_ULPI_D2 and ETH_MII_RXD3. |
| 36 | PB2 | bidirectional | 5 V-tolerant high-speed I/O with analog option (FT_ha); COMP1_INP additional function; alternate functions include RTC_OUT, SAI1_D1, DFSDM1_CKIN1 and QUADSPI_CLK. |
| 37 | PE7 | bidirectional | 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VOUT and COMP2_INM additional functions; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0 and FMC_D4. |
| 38 | PE8 | bidirectional | 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINM additional function; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5 and COMP2_OUT. |
| 39 | PE9 | bidirectional | 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINP and COMP2_INP additional functions; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS/UART7_DE, QUADSPI_BK2_IO2 and FMC_D6. |
| 40 | PE10 | bidirectional | 5 V-tolerant high-speed I/O (FT_ha); COMP2_INM additional function; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3 and FMC_D7. |
| 41 | PE11 | bidirectional | 5 V-tolerant high-speed I/O (FT_ha); COMP2_INP additional function; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_NSS, SAI2_SD_B, FMC_D8 and LCD_G3. |
| 42 | PE12 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9, COMP1_OUT and LCD_B4. |
| 43 | PE13 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10, COMP2_OUT and LCD_DE. |
| 44 | PE14 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11 and LCD_CLK. |
| 45 | PE15 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_BKIN, FMC_D12, TIM1_BKIN_COMP12 and LCD_R7. |
| 46 | PB10 | bidirectional | 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH3, HRTIM_SCOUT, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3 and ETH_MII_RX_ER. |
| 47 | PB11 | bidirectional | 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH4, HRTIM_SCIN, LPTIM2_ETR, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4 and ETH_MII_TX_EN. |
| 48 | VCAP | power_out | Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25. |
| 49 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |
| 50 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |
| 51 | PB12 | bidirectional | 5 V-tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and OTG_HS_ID. |
| 52 | PB13 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); OTG_HS_VBUS additional function; alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS, FDCAN2_TX and OTG_HS_ULPI_D6. |
| 53 | PB14 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH2N, TIM12_CH1, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and OTG_HS_DM. |
| 54 | PB15 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and OTG_HS_DP. |
| 55 | PD8 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN3, SAI3_SCK_B, USART3_TX, SPDIFRX1_IN2 and FMC_D13. |
| 56 | PD9 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN3, SAI3_SD_B, USART3_RX, FDCAN2_RXFD_MODE and FMC_D14. |
| 57 | PD10 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SAI3_FS_B, USART3_CK, FDCAN2_TXFD_MODE, FMC_D15 and LCD_B3. |
| 58 | PD11 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A and FMC_A16. |
| 59 | PD12 | bidirectional | 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1 and FMC_A17. |
| 60 | PD13 | bidirectional | 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, QUADSPI_BK1_IO3 and FMC_A18. |
| 61 | PD14 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH3, SAI3_MCLK_B, UART8_CTS and FMC_D0. |
| 62 | PD15 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH4, SAI3_MCLK_A, UART8_RTS/UART8_DE and FMC_D1. |
| 63 | PC6 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_CHA1, TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, FMC_NWAIT and DCMI_D0; SWPMI_IO additional function. |
| 64 | PC7 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRGIO, HRTIM_CHA2, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1 and DCMI_D1. |
| 65 | PC8 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, HRTIM_CHB1, TIM3_CH3, TIM8_CH3, USART6_CK, FMC_NE2/FMC_NCE, SWPMI_RX and DCMI_D2. |
| 66 | PC9 | bidirectional | 5 V-tolerant I/O with FM+ option (FT_fh); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, UART5_CTS, QUADSPI_BK1_IO0 and SDMMC1_D1. |
| 67 | PA8 | bidirectional | 5 V-tolerant I/O with FM+ option and analog option (FT_fha); alternate functions include MCO1, TIM1_CH1, HRTIM_CHB2, I2C3_SCL, USART1_CK, OTG_FS_SOF and UART7_RX. |
| 68 | PA9 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); OTG_FS_VBUS additional function; alternate functions include TIM1_CH2, HRTIM_CHC1, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX and DCMI_D0. |
| 69 | PA10 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH3, HRTIM_CHC2, LPUART1_RX, USART1_RX, OTG_FS_ID, MDIOS_MDIO and DCMI_D1. |
| 70 | PA11 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH4, HRTIM_CHD1, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, FDCAN1_RX and OTG_FS_DM. |
| 71 | PA12 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_ETR, HRTIM_CHD2, LPUART1_RTS/LPUART1_DE, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS/USART1_DE, FDCAN1_TX and OTG_FS_DP. |
| 72 | PA13 | bidirectional | 5 V-tolerant I/O (FT); default function JTMS-SWDIO (SWD debug data). |
| 73 | VCAP | power_out | Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25. |
| 74 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |
| 75 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |
| 76 | PA14 | bidirectional | 5 V-tolerant I/O (FT); default function JTCK-SWCLK (SWD clock). |
| 77 | PA15 | bidirectional | 5 V-tolerant I/O (FT); default function JTDI; alternate functions include TIM2_CH1/TIM2_ETR, HRTIM_FLT1, CEC, SPI1_NSS/I2S1_WS and UART4_RTS. |
| 78 | PC10 | bidirectional | 5 V-tolerant high-speed I/O (FT_ha); alternate functions include HRTIM_EEV1, DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2 and DCMI_D8. |
| 79 | PC11 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT2, DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3 and DCMI_D4. |
| 80 | PC12 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, HRTIM_EEV2, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9. |
| 81 | PD0 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN6, SAI3_SCK_A, UART4_RX, FDCAN1_RX and FMC_D2. |
| 82 | PD1 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN6, SAI3_SD_A, UART4_TX, FDCAN1_TX and FMC_D3. |
| 83 | PD2 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD and DCMI_D11. |
| 84 | PD3 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5 and LCD_G7. |
| 85 | PD4 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT3, SAI3_FS_A, USART2_RTS/USART2_DE, FDCAN1_RXFD_MODE and FMC_NOE. |
| 86 | PD5 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_EEV3, USART2_TX, FDCAN1_TXFD_MODE and FMC_NWE. |
| 87 | PD6 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include SAI1_D1, DFSDM1_DATIN1, SPI3_MOSI/I2S3_SDO, USART2_RX, FDCAN2_RXFD_MODE, SDMMC2_CK, FMC_NWAIT, DCMI_D10 and LCD_B2. |
| 88 | PD7 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN1, SDMMC2_CMD and FMC_NE1. |
| 89 | PB3 | bidirectional | 5 V-tolerant I/O (FT); default function JTDO/TRACESWO; alternate functions include TIM2_CH2, HRTIM_FLT4, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX. |
| 90 | PB4 | bidirectional | 5 V-tolerant I/O (FT); default function NJTRST; alternate functions include TIM16_BKIN, TIM3_CH1, HRTIM_EEV6, SPI1_MISO/I2S1_SDI, SPI3_MISO/I2S3_SDI, SDMMC2_D3 and UART7_TX. |
| 91 | PB5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM17_BKIN, TIM3_CH2, HRTIM_EEV7, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1 and DCMI_D10. |
| 92 | PB6 | bidirectional | 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, CEC, USART1_TX, LPUART1_TX, FDCAN2_TX, QUADSPI_BK1_NCS and FMC_SDNE1. |
| 93 | PB7 | bidirectional | 5 V-tolerant I/O with FM+ and analog option (FT_fa); PVD_IN additional function; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, USART1_RX, LPUART1_RX, FDCAN2_TXFD_MODE and FMC_NL. |
| 94 | BOOT0 | input | Dedicated BOOT0 boot-mode input; input voltage limited to 9.0 V (VPP additional function). |
| 95 | PB8 | bidirectional | 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, SDMMC1_CKIN, FDCAN1_RX, ETH_MII_TXD3 and DCMI_D6. |
| 96 | PB9 | bidirectional | 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_NSS/I2S2_WS, SDMMC1_CDIR, FDCAN1_TX and DCMI_D7. |
| 97 | PE0 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_ETR, TIM4_ETR, HRTIM_SCIN, UART8_RX, FDCAN1_RXFD_MODE, SAI2_MCLK_A, FMC_NBL0 and DCMI_D2. |
| 98 | PE1 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_IN2, HRTIM_SCOUT, UART8_TX, FDCAN1_TXFD_MODE, FMC_NBL1 and DCMI_D3. |
| 99 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |
| 100 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperatures | -40 | 85 | °C | 21 | |||
| Junction temperature | -40 | 125 | °C | 21 |
CAD (KiCad official)
- Symbol:
STM32H743VIT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32h743vit6-etched.step/stm32h743vit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32h743vit6.step/stm32h743vit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (357 pp, sha256
9c74d2015445f7c3, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).