Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS54340DDAR

Texas Instruments · DC-DC Converters · SOIC-8-EP

TPS54340DDAR from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT power_out Bootstrap voltage supply for high-side MOSFET gate driver; 0.1 µF ceramic capacitor (X5R or X7R, ≥10 V rating) required between BOOT and SW terminals.
2 VIN power_in Input supply voltage; operating range 4.5 V to 42 V with absolute maximum rating of 45 V and 10 ns transient rating of 45 V.
3 EN input Enable terminal with internal 1.2 µA pull-up current source; pull below 1.2 V enable threshold to disable device and reduce quiescent current to 1 µA.
4 RT/CLK input Resistor timing terminal for switching frequency set via external resistor to ground (100 kHz to 2500 kHz), or external clock synchronization input (160 kHz to 2300 kHz).
5 FB input Inverting input of transconductance error amplifier for output voltage feedback network; compared to internal 0.8 V ±1% reference.
6 COMP output Error amplifier output for frequency compensation network connection; internally clamped for peak current limit control of high-side MOSFET.
7 GND power_in Ground reference connection; must be electrically connected to thermal pad (pin 9) on PCB for proper operation.
8 SW output Switching node and source terminal of internal high-side MOSFET; connects to output inductor and catch diode with maximum voltage 45 V and transient rating of 45 V.
9 PowerPAD power_in Exposed thermal pad providing ground connection and thermal dissipation path; must be connected to PCB ground plane via multiple vias for proper thermal management and operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8-EP
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating input voltage 4.5 42 V 6
Internal undervoltage lockout threshold 4.1 4.3 4.48 V Rising 6
Shutdown supply current 1.3 3.5 μA EN = 0 V, 25°C, 4.5 V ≤ VIN ≤ 42 V 6
Operating: nonswitching supply current 146 175 μA FB = 0.9 V, TA = 25°C 6
Enable threshold voltage 1.1 1.2 1.3 V No voltage hysteresis, rising and falling 6
Input current (enable threshold −50 mV) -0.58 -1.2 -1.8 μA Enable threshold −50 mV 6
Hysteresis current -2.2 -3.4 -4.5 μA 6
Voltage reference 0.792 0.8 0.808 V 6
On-resistance (high-side MOSFET) 92 190 mΩ VIN = 12 V, BOOT-SW = 6 V 6
Error amplifier source/sink current -30 30 μA V(COMP) = 1 V, 100 mV overdrive 6
Current limit threshold 4.5 5.5 6.8 A All VIN and temperatures, Open Loop 6
Current limit threshold 4.5 5.5 6.25 A All temperatures, VIN = 12 V, Open Loop 6
Current limit threshold 5.2 5.5 5.85 A VIN = 12 V, TA = 25°C, Open Loop 6
Switching frequency range using RT mode 100 2500 kHz 6
Switching frequency fSW 450 500 550 kHz RT = 200 kΩ 6
Switching frequency range using CLK mode 160 2300 kHz 6
RT/CLK high threshold 1.55 2 V 6
RT/CLK low threshold 0.5 1.2 V 6
Input voltage VIN -0.3 45 V 5
EN terminal voltage EN -0.3 8.4 V 5
BOOT terminal voltage BOOT 53 V 5
FB terminal voltage FB -0.3 3 V 5
COMP terminal voltage COMP -0.3 3 V 5
RT/CLK terminal voltage RT/CLK -0.3 3.6 V 5
BOOT-SW voltage BOOT-SW 8 V 5
SW voltage SW -0.6 45 V 5
SW voltage, 10-ns transient -2 45 V 10-ns transient 5
Operating junction temperature -40 150 °C 5
Storage temperature TSTG -65 150 °C 5
Supply input voltage VIN 42 V Minimum printed as VO + VDO (Note 1) 5
Output voltage VO 0.8 41.1 V 5
Output current IO 0 3.5 A 5
Junction temperature TJ -40 150 °C 5
Junction-to-ambient thermal resistance θJA 42 °C/W standard board 5
Junction-to-top characterization parameter ψJT 5.9 °C/W 5
Junction-to-board characterization parameter ψJB 23.4 °C/W 5
Junction-to-case (top) thermal resistance θJCtop 45.8 °C/W 5
Junction-to-case (bottom) thermal resistance θJCbot 3.6 °C/W 5
Junction-to-board thermal resistance θJB 23.4 °C/W 5

CAD (KiCad official)

  • Symbol: TPS54340DDAR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: tps54340ddar-etched.step / tps54340ddar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54340ddar.step / tps54340ddar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 3725db41574a827f, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF