Generated by kicad-footprint-generator · KiCad file format 20260206
TPS54340DDAR
Texas Instruments · DC-DC Converters · SOIC-8-EP
TPS54340DDAR from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | power_out | Bootstrap voltage supply for high-side MOSFET gate driver; 0.1 µF ceramic capacitor (X5R or X7R, ≥10 V rating) required between BOOT and SW terminals. |
| 2 | VIN | power_in | Input supply voltage; operating range 4.5 V to 42 V with absolute maximum rating of 45 V and 10 ns transient rating of 45 V. |
| 3 | EN | input | Enable terminal with internal 1.2 µA pull-up current source; pull below 1.2 V enable threshold to disable device and reduce quiescent current to 1 µA. |
| 4 | RT/CLK | input | Resistor timing terminal for switching frequency set via external resistor to ground (100 kHz to 2500 kHz), or external clock synchronization input (160 kHz to 2300 kHz). |
| 5 | FB | input | Inverting input of transconductance error amplifier for output voltage feedback network; compared to internal 0.8 V ±1% reference. |
| 6 | COMP | output | Error amplifier output for frequency compensation network connection; internally clamped for peak current limit control of high-side MOSFET. |
| 7 | GND | power_in | Ground reference connection; must be electrically connected to thermal pad (pin 9) on PCB for proper operation. |
| 8 | SW | output | Switching node and source terminal of internal high-side MOSFET; connects to output inductor and catch diode with maximum voltage 45 V and transient rating of 45 V. |
| 9 | PowerPAD | power_in | Exposed thermal pad providing ground connection and thermal dissipation path; must be connected to PCB ground plane via multiple vias for proper thermal management and operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage | 4.5 | 42 | V | 6 | |||
| Internal undervoltage lockout threshold | 4.1 | 4.3 | 4.48 | V | Rising | 6 | |
| Shutdown supply current | 1.3 | 3.5 | μA | EN = 0 V, 25°C, 4.5 V ≤ VIN ≤ 42 V | 6 | ||
| Operating: nonswitching supply current | 146 | 175 | μA | FB = 0.9 V, TA = 25°C | 6 | ||
| Enable threshold voltage | 1.1 | 1.2 | 1.3 | V | No voltage hysteresis, rising and falling | 6 | |
| Input current (enable threshold −50 mV) | -0.58 | -1.2 | -1.8 | μA | Enable threshold −50 mV | 6 | |
| Hysteresis current | -2.2 | -3.4 | -4.5 | μA | 6 | ||
| Voltage reference | 0.792 | 0.8 | 0.808 | V | 6 | ||
| On-resistance (high-side MOSFET) | 92 | 190 | mΩ | VIN = 12 V, BOOT-SW = 6 V | 6 | ||
| Error amplifier source/sink current | -30 | 30 | μA | V(COMP) = 1 V, 100 mV overdrive | 6 | ||
| Current limit threshold | 4.5 | 5.5 | 6.8 | A | All VIN and temperatures, Open Loop | 6 | |
| Current limit threshold | 4.5 | 5.5 | 6.25 | A | All temperatures, VIN = 12 V, Open Loop | 6 | |
| Current limit threshold | 5.2 | 5.5 | 5.85 | A | VIN = 12 V, TA = 25°C, Open Loop | 6 | |
| Switching frequency range using RT mode | 100 | 2500 | kHz | 6 | |||
| Switching frequency | fSW | 450 | 500 | 550 | kHz | RT = 200 kΩ | 6 |
| Switching frequency range using CLK mode | 160 | 2300 | kHz | 6 | |||
| RT/CLK high threshold | 1.55 | 2 | V | 6 | |||
| RT/CLK low threshold | 0.5 | 1.2 | V | 6 | |||
| Input voltage | VIN | -0.3 | 45 | V | 5 | ||
| EN terminal voltage | EN | -0.3 | 8.4 | V | 5 | ||
| BOOT terminal voltage | BOOT | 53 | V | 5 | |||
| FB terminal voltage | FB | -0.3 | 3 | V | 5 | ||
| COMP terminal voltage | COMP | -0.3 | 3 | V | 5 | ||
| RT/CLK terminal voltage | RT/CLK | -0.3 | 3.6 | V | 5 | ||
| BOOT-SW voltage | BOOT-SW | 8 | V | 5 | |||
| SW voltage | SW | -0.6 | 45 | V | 5 | ||
| SW voltage, 10-ns transient | -2 | 45 | V | 10-ns transient | 5 | ||
| Operating junction temperature | -40 | 150 | °C | 5 | |||
| Storage temperature | TSTG | -65 | 150 | °C | 5 | ||
| Supply input voltage | VIN | 42 | V | Minimum printed as VO + VDO (Note 1) | 5 | ||
| Output voltage | VO | 0.8 | 41.1 | V | 5 | ||
| Output current | IO | 0 | 3.5 | A | 5 | ||
| Junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance | θJA | 42 | °C/W | standard board | 5 | ||
| Junction-to-top characterization parameter | ψJT | 5.9 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 23.4 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | θJCtop | 45.8 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance | θJCbot | 3.6 | °C/W | 5 | |||
| Junction-to-board thermal resistance | θJB | 23.4 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TPS54340DDAR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
tps54340ddar-etched.step/tps54340ddar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54340ddar.step/tps54340ddar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
3725db41574a827f, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).