3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownMD7671B50SF4
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · ESOP-8
MD7671B50SF4 from Shanghai Mingda Microelectronics, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulator output pin. Delivers up to 1 A at the programmed output voltage (default 5 V, adjustable down to 0.7 V). Requires a 4.7 µF or larger low-ESR ceramic output capacitor placed close to the pin. |
| 2 | ADJ | input | Feedback / adjust pin. Connect to an external R1/R2 divider from VOUT to set VOUT = 0.7 V * (1 + R1/R2). Tie ADJ to GND to select the internal feedback resistors for the default 5 V output. Reference voltage at ADJ is 0.7 V typ (0.686-0.714 V); ADJ input current is 10 nA typ. |
| 3 | GND | power_in | Ground / signal return pin. Also serves as the reference return for the regulator; connect together with the exposed pad to a solid ground plane for best thermal and noise performance. |
| 4 | N.C. | unconnected | No internal connection. May be left floating or tied to GND. |
| 5 | EN | input | Enable input, active high. VEN >= 1.6 V turns the regulator on; VEN <= 0.4 V shuts the device down (shutdown current 10 nA typ). During shutdown an internal ~30 Ω path discharges COUT to GND. Do not leave floating. |
| 6 | N.C. | unconnected | No internal connection. May be left floating or tied to GND. |
| 7 | N.C. | unconnected | No internal connection. May be left floating or tied to GND. |
| 8 | VIN | power_in | Power input pin. Operating input range 2-6 V (absolute max 7 V). Must be decoupled to GND with a 4.7 µF or larger ceramic capacitor placed close to the pin; use >=10 µF for high transient loads (>500 mA). |
| EP | GND (Exposed Pad) | power_in | Exposed thermal pad on the bottom of the ESOP-8 package. Must be connected to the GND plane to provide the primary thermal path (RθJB = 80 °C/W on a JEDEC 2s2p board). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
MD7671B50SF4MD7671A50SF4MD7671AXXSF4
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage (absolute maximum) | VIN | -0.3 | 7 | V | 2 | ||
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | 2 | |||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 2 | ||
| Storage Temperature | Tstg | -40 | 125 | ℃ | 2 | ||
| Input Voltage | VIN | 2 | 6 | V | 3 | ||
| Output Voltage Tolerance | VOUT(S) | -2 | 2 | % | IOUT=1mA | 3 | |
| Temperature Stability | ΔVOUT | -50 | 50 | ppm/℃ | VIN=VCE=VOUT(S)+1.0V, IOUT=1mA, -40℃≤TA≤125℃ | 3 | |
| Reference Voltage Tolerance | 0.686 | 0.7 | 0.714 | V | 3 | ||
| ADJ Pin Threshold | 0.05 | 0.1 | 0.2 | V | 3 | ||
| Enable Turn-On Threshold (Output ON) | 1.6 | V | 3 | ||||
| Enable Turn-Off Threshold (Output OFF) | 0.4 | V | 3 | ||||
| Max Output Discharge Resistance to GND during Shutdown | 30 | Ω | 3 | ||||
| Line Regulation | 3 | 15 | mV | VOUT(S)+1V≤VIN=VCE≤6V, IOUT=1mA | 3 | ||
| Load Regulation | VOUT2 | 10 | 20 | mV | VIN=VCE=VOUT(S)+1.0V, 1mA≤IOUT≤1A | 3 | |
| Shutdown Pin Current | 0.1 | 0.5 | μA | 3 | |||
| Continuous Output Current | IOUT | 1 | A | VIN>2.1V | 3 | ||
| Ground Current | IGND | 40 | μA | VEN=VIN, no load | 3 | ||
| Ground Current | IGND | 390 | μA | VEN=VIN, IOUT=100mA | 3 | ||
| Shutdown Current | ISHUT | 0.01 | μA | VEN=0 | 3 | ||
| Output Current Limit | ILIM | 1.4 | A | 3 | |||
| Current Fold Back | 0.4 | A | 3 | ||||
| Dropout Voltage | VDROP | 160 | mV | VCE=VIN, VOUT≥3V, IOUT=1A | 3 | ||
| ADJ Pin Current | 10 | nA | VADJ = VREF | 3 | |||
| Shutdown Exit Delay Time | 0 | μs | 3 | ||||
| PGOOD Rise Threshold | PGHTH | 90 | % | 3 | |||
| PGOOD Hysteresis | PGHYS | 10 | % | 3 | |||
| PGOOD Delay | PGDLY | 1 | ms | 3 | |||
| PGOOD Sink Capability | 0.05 | V | IPGOOD = 10mA | 3 | |||
| Power Supply Ripple Rejection | PSRR | 70 | dB | f=1kHz, IOUT=10mA | 3 | ||
| Power Supply Ripple Rejection | PSRR | 68 | dB | f=10kHz, IOUT=10mA | 3 | ||
| Power Supply Ripple Rejection | PSRR | 47 | dB | f=100kHz, IOUT=10mA | 3 | ||
| Power Supply Ripple Rejection | PSRR | 55 | dB | f=1MHz, IOUT=10mA | 3 | ||
| Output Noise Voltage | VOUTN | 115 | µVRMS | CBP = 1µF, VOUT=3.3V, f=10Hz ~100KHz | 3 | ||
| Thermal Shutdown Temperature | TSD | 175 | ℃ | 3 | |||
| Thermal Shutdown Hysteresis | TSD_HYS | 35 | ℃ | 3 | |||
| Thermal Resistance Junction-to-Board | RθJB | 80 | ℃/W | Mounted on JEDEC standard 4layer (2s2p) PCB test board | 2 | ||
| ESD Protection (HBM) | ESD | 4000 | V | HBM | 2 |
CAD (KiCad official)
- Symbol:
MD7671B50SF4 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
md7671b50sf4-etched.step/md7671b50sf4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md7671b50sf4.step/md7671b50sf4.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
md7671b50sf4.step |
125 KB | You want the bare part, or you mark your own boards. |
md7671b50sf4-etched.step |
2.3 MB | You want the part with MD7671B50SF4 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 581 faces against 152 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (10 pp, sha256
2d2f9d53083bf31d, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).