main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs md7671b50sf4: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers md7671b50sf4: viewers · Ray
md7671b50sf4-etched.fit.json md7671b50sf4: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md7671b50sf4-etched.glb md7671b50sf4: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md7671b50sf4-etched.step md7671b50sf4: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md7671b50sf4.glb Publish 0.1.0 · Ray
md7671b50sf4.kicad_mod Publish 0.1.0 · Ray
md7671b50sf4.kicad_sym Publish 0.1.0 · Ray
md7671b50sf4.lbr Publish 0.1.0 · Ray
md7671b50sf4.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json md7671b50sf4: specified limits as data (metadata.characteristics, 37 rows from the datasheet) · Ray
README.md md7671b50sf4: specified limits as data (metadata.characteristics, 37 rows from the datasheet) · Ray

MD7671B50SF4

Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · ESOP-8

MD7671B50SF4 from Shanghai Mingda Microelectronics, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Regulator output pin. Delivers up to 1 A at the programmed output voltage (default 5 V, adjustable down to 0.7 V). Requires a 4.7 µF or larger low-ESR ceramic output capacitor placed close to the pin.
2 ADJ input Feedback / adjust pin. Connect to an external R1/R2 divider from VOUT to set VOUT = 0.7 V * (1 + R1/R2). Tie ADJ to GND to select the internal feedback resistors for the default 5 V output. Reference voltage at ADJ is 0.7 V typ (0.686-0.714 V); ADJ input current is 10 nA typ.
3 GND power_in Ground / signal return pin. Also serves as the reference return for the regulator; connect together with the exposed pad to a solid ground plane for best thermal and noise performance.
4 N.C. unconnected No internal connection. May be left floating or tied to GND.
5 EN input Enable input, active high. VEN >= 1.6 V turns the regulator on; VEN <= 0.4 V shuts the device down (shutdown current 10 nA typ). During shutdown an internal ~30 Ω path discharges COUT to GND. Do not leave floating.
6 N.C. unconnected No internal connection. May be left floating or tied to GND.
7 N.C. unconnected No internal connection. May be left floating or tied to GND.
8 VIN power_in Power input pin. Operating input range 2-6 V (absolute max 7 V). Must be decoupled to GND with a 4.7 µF or larger ceramic capacitor placed close to the pin; use >=10 µF for high transient loads (>500 mA).
EP GND (Exposed Pad) power_in Exposed thermal pad on the bottom of the ESOP-8 package. Must be connected to the GND plane to provide the primary thermal path (RθJB = 80 °C/W on a JEDEC 2s2p board).

Key specifications

Parameter Value
Manufacturer Shanghai Mingda Microelectronics
Package ESOP-8
Category PMIC
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • MD7671B50SF4
  • MD7671A50SF4
  • MD7671AXXSF4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage (absolute maximum) VIN -0.3 7 V 2
Output Voltage (absolute maximum) VOUT -0.3 V 2
Operating Ambient Temperature Topr -40 85 ℃ 2
Storage Temperature Tstg -40 125 ℃ 2
Input Voltage VIN 2 6 V 3
Output Voltage Tolerance VOUT(S) -2 2 % IOUT=1mA 3
Temperature Stability ΔVOUT -50 50 ppm/℃ VIN=VCE=VOUT(S)+1.0V, IOUT=1mA, -40℃≤TA≤125℃ 3
Reference Voltage Tolerance 0.686 0.7 0.714 V 3
ADJ Pin Threshold 0.05 0.1 0.2 V 3
Enable Turn-On Threshold (Output ON) 1.6 V 3
Enable Turn-Off Threshold (Output OFF) 0.4 V 3
Max Output Discharge Resistance to GND during Shutdown 30 Ω 3
Line Regulation 3 15 mV VOUT(S)+1V≤VIN=VCE≤6V, IOUT=1mA 3
Load Regulation VOUT2 10 20 mV VIN=VCE=VOUT(S)+1.0V, 1mA≤IOUT≤1A 3
Shutdown Pin Current 0.1 0.5 μA 3
Continuous Output Current IOUT 1 A VIN>2.1V 3
Ground Current IGND 40 μA VEN=VIN, no load 3
Ground Current IGND 390 μA VEN=VIN, IOUT=100mA 3
Shutdown Current ISHUT 0.01 μA VEN=0 3
Output Current Limit ILIM 1.4 A 3
Current Fold Back 0.4 A 3
Dropout Voltage VDROP 160 mV VCE=VIN, VOUT≥3V, IOUT=1A 3
ADJ Pin Current 10 nA VADJ = VREF 3
Shutdown Exit Delay Time 0 μs 3
PGOOD Rise Threshold PGHTH 90 % 3
PGOOD Hysteresis PGHYS 10 % 3
PGOOD Delay PGDLY 1 ms 3
PGOOD Sink Capability 0.05 V IPGOOD = 10mA 3
Power Supply Ripple Rejection PSRR 70 dB f=1kHz, IOUT=10mA 3
Power Supply Ripple Rejection PSRR 68 dB f=10kHz, IOUT=10mA 3
Power Supply Ripple Rejection PSRR 47 dB f=100kHz, IOUT=10mA 3
Power Supply Ripple Rejection PSRR 55 dB f=1MHz, IOUT=10mA 3
Output Noise Voltage VOUTN 115 µVRMS CBP = 1µF, VOUT=3.3V, f=10Hz ~100KHz 3
Thermal Shutdown Temperature TSD 175 ℃ 3
Thermal Shutdown Hysteresis TSD_HYS 35 ℃ 3
Thermal Resistance Junction-to-Board RθJB 80 ℃/W Mounted on JEDEC standard 4layer (2s2p) PCB test board 2
ESD Protection (HBM) ESD 4000 V HBM 2

CAD (KiCad official)

  • Symbol: MD7671B50SF4
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: md7671b50sf4-etched.step / md7671b50sf4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md7671b50sf4.step / md7671b50sf4.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
md7671b50sf4.step 125 KB You want the bare part, or you mark your own boards.
md7671b50sf4-etched.step 2.3 MB You want the part with MD7671B50SF4 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 581 faces against 152 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Mingda Microelectronics datasheet (10 pp, sha256 2d2f9d53083bf31d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF