component
LM536035QPWPRQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM536035QPWPRQ1
Texas Instruments · DC-DC Converters · HTSSOP-16
LM536035QPWPRQ1 from Texas Instruments, in a HTSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Regulator switching node connected to power inductor; maximum voltage VIN+0.3V with transient tolerance to 42V for 100ns. |
| 2 | SW | output | Regulator switching node connected to power inductor; connect directly to pin 1 at PCB; maximum voltage VIN+0.3V. |
| 3 | CBOOT | power_in | Bootstrap capacitor supply for high-side gate driver; maximum voltage 3.6V relative to SW; connect 470nF capacitor to SW. |
| 4 | VCC | power_out | Internal regulated 3.15V supply output for control circuits; maximum voltage 4.2V; connect 3.3µF capacitor to GND, no external loads. |
| 5 | BIAS | input | Feedback input connected to output voltage point for regulator control; maximum voltage 16V; current draw 47-78µA at VBIAS=5V. |
| 6 | SYNC | input | Synchronization clock input for frequency synchronization; range 1.9-2.3MHz; logic levels VIH=1.5V, VIL=0.4V; connect to GND if unused. |
| 7 | FPWM | input | PWM/PFM mode selection input; high enables forced PWM, low enables automatic mode; logic levels VIH=1.5V, VIL=0.4V. |
| 8 | RESET | tri_state | Open-drain power-status output; maximum current 1.2mA; low when EN=low or fault detected, high when output ≥107% nominal voltage. |
| 9 | FB | input | Feedback voltage input for output regulation; input impedance 1MΩ for both 5V and 3.3V options; do not float or ground. |
| 10 | AGND | power_in | Analog ground reference for all electrical measurements; maximum differential to PGND ±2V for transients ≤1µs per absolute maximum. |
| 11 | EN | input | Enable input for regulator control; threshold rising 1.7V, falling 0.8V with 0.45V hysteresis; maximum voltage 40V; high=ON, low=OFF. |
| 12 | VIN | power_in | Input power supply; voltage range 3.9-36V nominal, maximum sustained 42V for ≤500ms; connect high-quality bypass capacitor(s) to PGND. |
| 13 | VIN | power_in | Input power supply; voltage range 3.9-36V nominal, maximum sustained 42V for ≤500ms; connect directly to pin 12 at PCB. |
| 14 | N/C | unconnected | No internal connection to device. |
| 15 | PGND | power_in | Power ground for low-side MOSFET driver; connect to AGND and system ground; connect directly to pin 16 at PCB. |
| 16 | PGND | power_in | Power ground for low-side MOSFET driver; connect to AGND and system ground; connect directly to pin 15 at PCB. |
| 17 | EP | power_in | Exposed die-attach paddle providing power ground; junction-to-case thermal resistance 1.7°C/W; connect to ground plane for thermal and EMI control. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
LM536035QPWPRQ1 - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
lm536035qpwprq1-etched.step/lm536035qpwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm536035qpwprq1.step/lm536035qpwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
b2d0d78814aaf2aa, retrieved 2026-10-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).