Hardware
Hardware: components, molecules, projects, and equipment with symbols, footprints, and 3D models.
19426 hardware pages matching · page 404 of 405
srr1280-220m
Bourns SRR1280-220M. 22 uH shielded SMD power inductor, Isat 4.1 A, 12.5 x 12.5 mm
adom-wiki pkg install adom/srr1280-220m
ftsh-107-01-l-dv-k
Samtec FTSH-107-01-L-DV-K. 2x7 (14-pin) 1.27 mm-pitch SMT micro header, Arm Cortex STDC14 debug
adom-wiki pkg install adom/ftsh-107-01-l-dv-k
abm3b-8-000mhz-10-1-u-t
Abracon ABM3B-8.000MHZ-10-1-U-T. 8.000 MHz quartz crystal, 10 pF load, +/-10 ppm, 5.0 x 3.2 mm 4-pad SMD
adom-wiki pkg install adom/abm3b-8-000mhz-10-1-u-t
bss123
onsemi BSS123. 100 V, 170 mA logic-level N-channel MOSFET, SOT-23
adom-wiki pkg install adom/bss123
TPD2EUSB30DRTR — 2-Channel USB 3.0 TVS ESD Array (TI)
Texas Instruments TPD2EUSB30DRTR — 2-channel TVS-based ESD protection array for USB 3.0 SuperSpeed (5 Gbps) and other high-speed differential IO. 0.7 pF typical IO-GND capacitance, IEC 61000-4-2 ±8 kV contact and air-gap, IEC 61000-4-5 5 A (8/20 µs) surge, 5.5 V reverse stand-off, flow-through pin mapping, 3-pin SOT (DRT) 1.00 × 0.80 mm.
adom-wiki pkg install adom/tpd2eusb30drtr
LP5912Q1.1DRVRQ1 — Automotive 500 mA Low-Noise LDO, 1.1 V (TI)
Texas Instruments LP5912-Q1 — AEC-Q100 grade-1 automotive 500-mA low-noise low-IQ LDO, fixed 1.1 V output. 1.6–6.5 V input, 12 µVRMS noise with no bypass capacitor, 75 dB PSRR at 1 kHz, 30 µA typical quiescent current, 170 mV typical dropout at 500 mA, open-drain power good, output auto-discharge and reverse-current protection, –40 to +125 °C junction, 6-pin WSON (DRV) 2.00 × 2.00 mm with exposed thermal pad.
adom-wiki pkg install adom/lp5912q1-1drvrq1
PMEG3050EP-QX: 30 V 5 A Automotive Schottky Rectifier, SOD-128
Nexperia PMEG3050EP-QX automotive Schottky barrier rectifier, 30 V reverse, 5 A average forward current, low forward voltage, AEC-Q101 qualified, SOD-128 package.
adom-wiki pkg install adom/pmeg3050ep-qx
[DEPRECATED] 1 A Low-Dropout Regulator - AMS1117 → ams-ams1117 / umw-ams1117
DEPRECATED - split by manufacturer. Use adom/ams-ams1117 (Advanced Monolithic Systems: 1.5-5.0 V incl. 2.85 V, SOT-223/TO-252/SO-8) or adom/umw-ams1117 (UMW/Youtai: 1.2-5.0 V, SOT-223/TO-252/SOT-89). The two vendors ship different voltage lineups, different packages and materially different limits.
adom-wiki pkg install adom/ams1117
1 A Low-Dropout Regulator AMS - AMS1117
Advanced Monolithic Systems AMS1117 - the original three-terminal 1 A low-dropout linear regulator. Fixed 1.5/1.8/2.5/2.85/3.3/5.0 V or adjustable, in SOT-223, TO-252 (DPAK) and 8-lead SOIC.
adom-wiki pkg install adom/ams-ams1117
1 A Low-Dropout Regulator UMW - AMS1117
UMW / Youtai Semiconductor AMS1117 - second-source three-terminal 1 A low-dropout linear regulator. Fixed 1.2/1.5/1.8/2.5/3.3/5.0 V or adjustable, in SOT-223-3L, TO-252-2L and SOT-89-3L.
adom-wiki pkg install adom/umw-ams1117
MDA4020-3R3M: 3.3 uH 3.5 A Molded Power Inductor
KOHERelec MDA4020-3R3M alloy molded power inductor, 3.3 uH +/-20 percent, 3.5 A rated, 3.1 A saturation, 65 mohm DCR, 4.5 x 4.1 mm SMD.
adom-wiki pkg install adom/mda4020-3r3m
BLM18AG221SN1D: 220 Ohm 0603 Ferrite Bead
Murata BLM18AG221SN1D ferrite bead, 220 ohm impedance at 100 MHz, 2 A rated current, 50 mohm DC resistance, 0603 (1608 metric) size.
adom-wiki pkg install adom/blm18ag221sn1d
FCM1608KF-601T03 — 600 Ω @ 100 MHz 0603 Ferrite Bead (Taiyo Yuden)
Taiyo Yuden FCM1608KF-601T03 chip ferrite bead — 600 ohm @ 100 MHz, 0603 (1608 metric). Used for VDDA/analog supply EMI filtering.
adom-wiki pkg install adom/fcm1608kf-601t03
CC0402MPX5R5BB225 — 2.2 µF 0402 6.3 V X5R MLCC (YAGEO)
YAGEO CC0402MPX5R5BB225 — 2.2 uF, 6.3 V, X5R, 0402 MLCC ceramic capacitor.
adom-wiki pkg install adom/cc0402mpx5r5bb225
0402ZD475KAT2A — 4.7 µF 0402 10 V X5R MLCC (KYOCERA AVX)
KYOCERA AVX 0402ZD475KAT2A — 4.7 uF, 10 V, X5R, 0402 MLCC ceramic capacitor.
adom-wiki pkg install adom/0402zd475kat2a
tps7a0533pdbzr
Texas Instruments TPS7A0533PDBZR. 200 mA ultra-low-Iq LDO regulator, fixed 3.3 V, SOT-23-3
adom-wiki pkg install adom/tps7a0533pdbzr
STM32H563RGTx
STMicroelectronics STM32H563RGTx — Arm Cortex-M33 microcontroller (250 MHz, 2 MB flash, 640 KB SRAM) with Ethernet MAC. LQFP-64 (10x10mm, 0.5mm pitch).
adom-wiki pkg install adom/stm32h563rgtx
DT1240A-08LP3810
Diodes Incorporated DT1240A-08LP3810 — 8-channel low-capacitance TVS / ESD protection array in the LP3810 (UDFN-10) package, for ESD protection of 1000BASE-T media pairs.
adom-wiki pkg install adom/dt1240a-08lp3810
RCLAMP0582B
Semtech RCLAMP0582B — low-capacitance TVS diode array for ESD protection of high-speed automotive Ethernet lines (100BASE-T1).
adom-wiki pkg install adom/rclamp0582b
ads124s08ipbsr
Texas Instruments ADS124S08IPBSR. 24-bit, 4-kSPS, 12-channel delta-sigma ADC with PGA and reference, HTQFP-32
adom-wiki pkg install adom/ads124s08ipbsr
KSZ9131RNXI — Gigabit Ethernet PHY, RGMII (Microchip)
Microchip KSZ9131RNXI — 10/100/1000BASE-T Gigabit Ethernet PHY with RGMII MAC interface, industrial temp, VQFN-48 (7x7mm). Multi-unit KiCad symbol grouped by function.
adom-wiki pkg install adom/ksz9131rnxi
HD3SS3212IRKSR
HD3SS3212IRKSR — IC. Canonical adom-lbr JSON + KiCad symbol/footprint/3D. Used on the USB3-to-Ethernet Data-Only Molecule.
adom-wiki pkg install barrett-land/hd3ss3212irksr
M93C66-WMN6TP
M93C66-WMN6TP — IC. Canonical adom-lbr JSON + KiCad symbol/footprint/3D. Used on the USB3-to-Ethernet Data-Only Molecule.
adom-wiki pkg install barrett-land/m93c66-wmn6tp
nRF54L15
Nordic nRF54L15 — next-gen ultra-low-power 2.4 GHz wireless SoC. Arm Cortex-M33, 1.5 MB NVM, BLE / 802.15.4, NFC. QFN-48 6x6 mm. A reference component page with datasheet-cited pins (ds2sf), interactive symbol/footprint/3D, and full CAD.
CR0603-FX-5601ELF
Bourns · Thick Film Chip Resistor · General Purpose
si3437dv-t1-ge3
Vishay Siliconix SI3437DV-T1-GE3. P-channel power MOSFET, TSOP-6
adom-wiki pkg install adom/si3437dv-t1-ge3
irl80hs120
Infineon Technologies IRL80HS120. 80 V, 12.5 A logic-level N-channel power MOSFET, PQFN 2x2 (DFN2020-6)
adom-wiki pkg install adom/irl80hs120
ABM8AIG-25.000MHZ-12-2Z-T3: 25 MHz Automotive Crystal, 3.2 x 2.5 mm
Abracon ABM8AIG automotive quartz crystal, 25 MHz, 12 pF load capacitance, +/-20 ppm tolerance, -40 to +125 C, AEC-Q200 qualified, 3.2 x 2.5 mm 4-pad ceramic SMD.
adom-wiki pkg install adom/abm8aig-25-000mhz-12-2z-t3
TL331LV
TL331LV - single low-voltage comparator, SOT-23-5, with REVERSED input pinout (IN- = pin 1, IN+ = pin 3). Canonical adom-lbr JSON + KiCad symbol/footprint/3D. Used on the USB3-to-Ethernet Data-Only Molecule.
adom-wiki pkg install barrett-land/tl331lv
LMV331IDBVR
LMV331IDBVR — IC. Canonical adom-lbr JSON + KiCad symbol/footprint/3D. Used on the USB3-to-Ethernet Data-Only Molecule.
adom-wiki pkg install barrett-land/lmv331idbvr
HFJ11-1G41E-L12RL — Gigabit RJ45 Jack w/ Integrated Magnetics (Halo)
Halo Electronics HFJ11-1G41E-L12RL — single-port 10/100/1000BASE-T RJ45 modular jack with integrated magnetics and green/yellow LEDs, through-hole.
adom-wiki pkg install adom/hfj11-1g41e-l12rl
Pin Header 1x12 2.54mm Vertical
Generic 12-position single-row 2.54 mm pitch vertical through-hole pin header. KiCad standard symbol (Conn_01x12), footprint (PinHeader_1x12_P2.54mm_Vertical) and 3D model.
adom-wiki pkg install adom/pinheader-1x12-p2-54mm-vertical
Pin Header 1x08 2.54mm Vertical
Generic 8-position single-row 2.54 mm pitch vertical through-hole pin header. KiCad standard symbol (Conn_01x08), footprint (PinHeader_1x08_P2.54mm_Vertical) and 3D model.
adom-wiki pkg install adom/pinheader-1x08-p2-54mm-vertical
2N7002_HXY
2N7002 N-channel MOSFET (HXY), SOT-23. Canonical adom-lbr JSON for one-command conversion to KiCad, native Altium, or EAGLE/Fusion.
adom-wiki pkg install adom/2n7002-hxy
BQ7692003PWR — TI BQ76920 3–5 Cell Li-Ion Battery Monitor AFE (20-TSSOP)
Texas Instruments BQ76920 (BQ7692003PWR orderable: I²C 0x08, 3.3 V LDO, CRC) 3–5 cell battery-monitor analog front-end, 20-TSSOP. Full component: interactive symbol, footprint, and 3D, with KiCad and Fusion/EAGLE exports.
tja1051t-3-118
NXP Semiconductors TJA1051T/3,118. High-speed CAN transceiver, 5 V, SOIC-8
adom-wiki pkg install adom/tja1051t-3-118
Machine Pin Large Standard
Adom Large Standard press-fit machine pin (Ø3.6 body / Ø3.45 hole)
adom-wiki pkg install adom/machinepinlargestandard
Machine Pin Medium Standard
Adom Medium Standard machine pin (Ø1.2 body / Ø1.2 hole)
adom-wiki pkg install adom/machinepinmediumstandard
COSMIIC Power Module Eval Board
COSMIIC Power Module (PM1C Rev 1.2) — NXP LPC2129 ARM7, 8-layer rigid-flex, CANopen hub, MedRadio telemetry, inductive charging. Full KiCad project with symbols, footprints, 3D models, Gerbers, iBOM.
adom-wiki pkg install cosmiic/cosmiic-power-module-eval-board-357000
COSMOCOIL Wireless Charger [COSMIIC]
COSMOCOIL Wireless Charger [COSMIIC]
adom-wiki pkg install cosmiic/cosmocoil-wireless-charger-cosmiic-761900
WAGO 2601-3111 — PCB Terminal Block (11-pos, 3.5 mm pitch)
WAGO 2601 series PCB terminal block, push-in CAGE CLAMP, 11 positions, 3.5 mm pin spacing, vertical mount.
WAGO 2601-3108_000-021 — PCB Terminal Block (8-pos, 3.5 mm pitch)
WAGO 2601 series PCB terminal block, push-in CAGE CLAMP, 8 positions, 3.5 mm pin spacing, vertical mount.
WAGO 2601-3106_000-021 — PCB Terminal Block (6-pos, 3.5 mm pitch)
WAGO 2601 series PCB terminal block, push-in CAGE CLAMP, 6 positions, 3.5 mm pin spacing, vertical mount.
WAGO 2601-1112 — PCB Terminal Block (12-pos, 3.5 mm pitch, horizontal)
WAGO 2601 series PCB terminal block, push-in CAGE CLAMP, 12 positions, 3.5 mm pin spacing, horizontal mount.
WAGO 2601-1111 — PCB Terminal Block (11-pos, 3.5 mm pitch, horizontal)
WAGO 2601 series PCB terminal block, push-in CAGE CLAMP, 11 positions, 3.5 mm pin spacing, horizontal mount.
WAGO 2601-1110 — PCB Terminal Block (10-pos, 3.5 mm pitch, horizontal)
WAGO 2601 series PCB terminal block, push-in CAGE CLAMP, 10 positions, 3.5 mm pin spacing, horizontal mount.
WAGO 2601-1109 — PCB Terminal Block (9-pos, 3.5 mm pitch, horizontal)
WAGO 2601 series PCB terminal block, push-in CAGE CLAMP, 9 positions, 3.5 mm pin spacing, horizontal mount.
WAGO 2601-1108 — PCB Terminal Block (8-pos, 3.5 mm pitch, horizontal)
WAGO 2601 series PCB terminal block, push-in CAGE CLAMP, 8 positions, 3.5 mm pin spacing, horizontal mount.