Components

Bryan LED Nameplate

Bryan LED Nameplate·Adom Industries·128x58mm 2-layer FR4 molecule

USB-C-powered desk nameplate: spells BRYAN in 56 white 0402 LEDs on a 128x58mm board. No microcontroller — each LED wires to VBUS through its own 180 ohm current-limiting resistor. Plug in any iPhone USB-C charger and it lights up. Built as an Adom molecule with 4 corner machine-contact pins.

JST BM02B-GHS-TBT (GH 1.25mm SMT header)

BM02B-GHS-TBT·JST·GH series, 1.25mm pitch, 2-pin, SMT, top entry

JST BM02B-GHS-TBT - 2-pin, 1.25mm pitch, SMT top-entry GH-series board header (mates GHR-02V-S wire housing). Interactive JST-vs-KiCad 3D comparison; sym/fp from JST datasheet (ds2sf) + KiCad. Run chi

bhi385-wiretest

BHI385 wiring-pipeline test molecule (Fusion-origin): STEP + silkscreen + EAGLE .brd. Validates wiki publish (STEP->GLB+silk) and import-time footprint generation.

JST B2B-ZR (ZH 1.5mm board header)

B2B-ZR·JST·ZH series, 1.5mm pitch, 2-pin, through-hole, top entry

JST B2B-ZR - 2-pin, 1.5mm pitch, through-hole top-entry ZH-series board header (mates ZHR-2 wire housing). JST manufacturer 3D + datasheet-derived (ds2sf) symbol/footprint. KiCad has no ZH, so footpri

JST B2B-XH-A (XH 2.5mm board header)

B2B-XH-A·JST·XH series, 2.5mm pitch, 2-pin, through-hole, top entry

JST B2B-XH-A - 2-pin, 2.5mm pitch, through-hole XH-series board header (mates the XHP-2 wire housing). Interactive JST-vs-KiCad 3D comparison; symbol/footprint from JST datasheet (ds2sf) and KiCad. Ru

JST B2B-PH-K-S (PH 2.0mm board header)

B2B-PH-K-S·JST·PH series, 2.0 mm pitch, 2-pin, through-hole, top entry

JST B2B-PH-K-S — 2-pin, 2.0 mm pitch, through-hole top-entry PH-series board header (the board-side mate for the PHR-2 wire housing). KiCad symbol + footprint + 3D ready to drop in. Datasheet links to

taprite-mosfet-wiretest

Taprite MOSFET molecule (KiCad) wiring-pipeline test: anchored GLB + .kicad_pcb. Validates KiCad publish->import->footprint->wiring end to end.

usb2532-hub-c-wiretest

USB2532 HUB molecule (KiCad) wiring-pipeline test: anchored GLB + .kicad_pcb. Validates KiCad publish->import->footprint->wiring end to end.