Generated by kicad-footprint-generator · KiCad file format 20260206
XW01-SOP8
Sam&wing · Touch Sensors · SOP-8
XW01-SOP8 from Sam&wing, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply negative terminal, reference ground. |
| 2 | C1 | passive | Internal balance capacitor pin, normally connected to GND through 4.7nF (allowed range 1 to 10nF). |
| 3 | CSEL | passive | Sensitivity fine-adjust capacitor pin, 0pF (not connected) to 100pF maximum; a smaller capacitance gives higher sensitivity. |
| 4 | C2 | passive | Reference capacitor pin used as the detection comparison baseline; its value should be as close as possible to the total parasitic capacitance of the KEY pin. |
| 5 | KEY | input | Touch sense input pin, connected in series with a 2K ohm resistor to the touch pad. |
| 6 | OUT | output | Open-drain touch output that is high-impedance when no touch is detected and low when a touch is detected; needs an external pull-up resistor to the supply. |
| 7 | NC | unconnected | Internal mode-setting pin, to be left floating. |
| 8 | VDD | power_in | Power supply positive terminal, 2.5V to 5.5V operating range, fed through a mandatory 20 ohm series resistor with 100nF decoupling. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sam&wing |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
XW01-SOP8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
xw01-sop8-etched.step/xw01-sop8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xw01-sop8.step/xw01-sop8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sam&wing datasheet (8 pp, sha256
f801ddd9db22812b, retrieved 2026-11-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).