main
History Download
Ray Publish 0.1.5 2482fdf

XW01-SOP8

Sam&wing · Touch Sensors · SOP-8

XW01-SOP8 from Sam&wing, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power supply negative terminal, reference ground.
2 C1 passive Internal balance capacitor pin, normally connected to GND through 4.7nF (allowed range 1 to 10nF).
3 CSEL passive Sensitivity fine-adjust capacitor pin, 0pF (not connected) to 100pF maximum; a smaller capacitance gives higher sensitivity.
4 C2 passive Reference capacitor pin used as the detection comparison baseline; its value should be as close as possible to the total parasitic capacitance of the KEY pin.
5 KEY input Touch sense input pin, connected in series with a 2K ohm resistor to the touch pad.
6 OUT output Open-drain touch output that is high-impedance when no touch is detected and low when a touch is detected; needs an external pull-up resistor to the supply.
7 NC unconnected Internal mode-setting pin, to be left floating.
8 VDD power_in Power supply positive terminal, 2.5V to 5.5V operating range, fed through a mandatory 20 ohm series resistor with 100nF decoupling.

Key specifications

Parameter Value
Manufacturer Sam&wing
Package SOP-8
Category Sensors
Pins 8

CAD (KiCad official)

  • Symbol: XW01-SOP8
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: xw01-sop8-etched.step / xw01-sop8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xw01-sop8.step / xw01-sop8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sam&wing datasheet (8 pp, sha256 f801ddd9db22812b, retrieved 2026-11-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF