main
Ray
Set visibility: public
918d16e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254
{
"schema_version": 1,
"type": "component",
"slug": "xw01-sop8",
"title": "XW01-SOP8",
"brief": "Sam&wing Touch Sensors, SOP-8. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.5",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"sensors",
"xw01-sop8",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "XW01-SOP8",
"manufacturer": "Sam&wing",
"package": "SOP-8",
"pin_count": 8,
"category": "Sensors",
"subcategory": "Touch Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/1d0c40fb1015a1967ef3da0b18c41152.pdf",
"parts": {
"symbol": "xw01-sop8.kicad_sym",
"footprint": "xw01-sop8.kicad_mod",
"model_3d": "xw01-sop8-hero.glb",
"model_3d_plain": "xw01-sop8.glb",
"model_3d_step": "xw01-sop8-etched.step",
"model_3d_step_plain": "xw01-sop8.step",
"lbr": "xw01-sop8.lbr"
},
"distributor_links": {
"lcsc": "C5264412"
},
"distributor_check": {
"checked_at": "2026-11-17T07:44:11Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Power supply negative terminal, reference ground."
},
{
"number": "2",
"name": "C1",
"type": "passive",
"description": "Internal balance capacitor pin, normally connected to GND through 4.7nF (allowed range 1 to 10nF)."
},
{
"number": "3",
"name": "CSEL",
"type": "passive",
"description": "Sensitivity fine-adjust capacitor pin, 0pF (not connected) to 100pF maximum; a smaller capacitance gives higher sensitivity."
},
{
"number": "4",
"name": "C2",
"type": "passive",
"description": "Reference capacitor pin used as the detection comparison baseline; its value should be as close as possible to the total parasitic capacitance of the KEY pin."
},
{
"number": "5",
"name": "KEY",
"type": "input",
"description": "Touch sense input pin, connected in series with a 2K ohm resistor to the touch pad."
},
{
"number": "6",
"name": "OUT",
"type": "output",
"description": "Open-drain touch output that is high-impedance when no touch is detected and low when a touch is detected; needs an external pull-up resistor to the supply."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "Internal mode-setting pin, to be left floating."
},
{
"number": "8",
"name": "VDD",
"type": "power_in",
"description": "Power supply positive terminal, 2.5V to 5.5V operating range, fed through a mandatory 20 ohm series resistor with 100nF decoupling."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/1d0c40fb1015a1967ef3da0b18c41152.pdf",
"pages": 8,
"sha256": "f801ddd9db22812b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
},
"datasheet_names": "datasheet names confirmed by reviewer part-reviewer (ray review, verify triage) against figure, p.3 (管脚描述 (pin description table))"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "xw01-sop8.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "xw01-sop8-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "802f4ef56c83663d05c08cb0f6cb9123433336e0c41436773bc8b6058a2294c0",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOP8",
"source_page": 8,
"D": {
"nom_mm": 4.92,
"range_mm": [
4.72,
5.12
]
},
"E1": {
"nom_mm": 3.95,
"range_mm": [
3.75,
4.15
]
},
"E": {
"nom_mm": 6,
"range_mm": [
5.7,
6.3
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.5,
"range_mm": [
1.3,
1.7
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "xw01-sop8.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
},
"metadata": {
"specs": {
"Manufacturer": "Sam&wing",
"Package": "SOP-8",
"Category": "Sensors",
"Pins": "8"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"xw01-sop8"
],
"discovery_pitch": "XW01-SOP8 (Sam&wing) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"xw01-sop8.kicad_sym",
"xw01-sop8.kicad_mod",
"xw01-sop8.glb",
"xw01-sop8.step",
"xw01-sop8.lbr",
"docs/hero.png",
"docs/xw01-sop8-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"xw01-sop8-hero.glb",
"xw01-sop8-hero.overlay.json"
],
"visibility": {
"public": true
}
}