component
XTR300AIRGWR
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, VQFN-20-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/xtr300airgwr
136e001
XTR300AIRGWR
Texas Instruments · ADCs/DACs - Special Purpose · VQFN-20-EP(5x5)
XTR300AIRGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | M2 | input | Mode Input pin; selects output mode configuration; internally pulled low with 1μA |
| 2 | M1 | input | Mode Input pin; selects voltage or current output mode; internally pulled low with 1μA |
| 3 | VIN | power_in | Noninverting Signal Input for operational amplifier; voltage range (V−)+3V to (V+)−3V |
| 4 | SET | input | Input for Gain Setting and Inverting Input for operational amplifier; voltage range (V−)+3V to (V+)−3V |
| 5 | IMON | output | Current Monitor Output; provides 1/10 copy of output current; output swing (V−)+3V to (V+)−3V |
| 6 | IAOUT | output | Instrumentation Amplifier Signal Output current; output swing (V−)+3V to (V+)−3V |
| 7 | IAIN− | input | Instrumentation Amplifier Inverting Input; voltage range (V−)+3V to (V+)−3V |
| 8 | IAIN+ | input | Instrumentation Amplifier Noninverting Input; voltage range (V−)+3V to (V+)−3V |
| 9 | RG1 | passive | Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN |
| 10 | RG2 | passive | Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN |
| 11 | V− | power_in | Negative Power Supply; operating voltage range ±5V to ±22V; must connect exposed thermal pad to this pin |
| 12 | NC | unconnected | No Internal Connection |
| 13 | DRV | output | Operational Amplifier Output; voltage swing (V−)+3V to (V+)−3V; short-circuit current ±15mA to ±24mA depending on mode |
| 14 | NC | unconnected | No Internal Connection |
| 15 | V+ | power_in | Positive Power Supply; operating voltage range ±5V to ±22V; absolute maximum +44V |
| 16 | DGND | power_in | Ground for Digital I/O; must be within (V−) ≤ DGND ≤ (V+)−7V; carries digital output sink current |
| 17 | EFCM | output | Error Flag for Common-Mode Over-Range, Active Low; open-drain output with internal 1μA pull-up; indicates IA input exceeds linear range |
| 18 | EFLD | output | Error Flag for Load Error, Active Low; open-drain output with internal 1μA pull-up; indicates short-circuit or open-load condition |
| 19 | EFOT | output | Error Flag for Over-Temperature, Active Low; open-drain output with internal 1μA pull-up; activates at +140°C, resets at +125°C |
| 20 | OD | input | Output Disable, Disabled Low; digital input disables DRV output when driven low; internally pulled high with 1μA |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(5x5) |
| Category | Data Acquisition |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
XTR300AIRGWR - Footprint:
Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm - 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
xtr300airgwr-etched.step/xtr300airgwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xtr300airgwr.step/xtr300airgwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
d2c27eb00988de9f, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XTR300AIRGWR
**Texas Instruments** · ADCs/DACs - Special Purpose · VQFN-20-EP(5x5)
XTR300AIRGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | M2 | input | Mode Input pin; selects output mode configuration; internally pulled low with 1μA |
| 2 | M1 | input | Mode Input pin; selects voltage or current output mode; internally pulled low with 1μA |
| 3 | VIN | power_in | Noninverting Signal Input for operational amplifier; voltage range (V−)+3V to (V+)−3V |
| 4 | SET | input | Input for Gain Setting and Inverting Input for operational amplifier; voltage range (V−)+3V to (V+)−3V |
| 5 | IMON | output | Current Monitor Output; provides 1/10 copy of output current; output swing (V−)+3V to (V+)−3V |
| 6 | IAOUT | output | Instrumentation Amplifier Signal Output current; output swing (V−)+3V to (V+)−3V |
| 7 | IAIN− | input | Instrumentation Amplifier Inverting Input; voltage range (V−)+3V to (V+)−3V |
| 8 | IAIN+ | input | Instrumentation Amplifier Noninverting Input; voltage range (V−)+3V to (V+)−3V |
| 9 | RG1 | passive | Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN |
| 10 | RG2 | passive | Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN |
| 11 | V− | power_in | Negative Power Supply; operating voltage range ±5V to ±22V; must connect exposed thermal pad to this pin |
| 12 | NC | unconnected | No Internal Connection |
| 13 | DRV | output | Operational Amplifier Output; voltage swing (V−)+3V to (V+)−3V; short-circuit current ±15mA to ±24mA depending on mode |
| 14 | NC | unconnected | No Internal Connection |
| 15 | V+ | power_in | Positive Power Supply; operating voltage range ±5V to ±22V; absolute maximum +44V |
| 16 | DGND | power_in | Ground for Digital I/O; must be within (V−) ≤ DGND ≤ (V+)−7V; carries digital output sink current |
| 17 | EFCM | output | Error Flag for Common-Mode Over-Range, Active Low; open-drain output with internal 1μA pull-up; indicates IA input exceeds linear range |
| 18 | EFLD | output | Error Flag for Load Error, Active Low; open-drain output with internal 1μA pull-up; indicates short-circuit or open-load condition |
| 19 | EFOT | output | Error Flag for Over-Temperature, Active Low; open-drain output with internal 1μA pull-up; activates at +140°C, resets at +125°C |
| 20 | OD | input | Output Disable, Disabled Low; digital input disables DRV output when driven low; internally pulled high with 1μA |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(5x5) |
| Category | Data Acquisition |
| Pins | 21 |
## CAD (KiCad official)
- Symbol: `XTR300AIRGWR`
- Footprint: `Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm`
- 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `xtr300airgwr-etched.step` / `xtr300airgwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xtr300airgwr.step` / `xtr300airgwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/xtr300) (39 pp, sha256 `d2c27eb00988de9f`, retrieved 2026-09-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xtr300airgwr-datasheet.pdf)